LTMM-04-02-S-D [SAMTEC]
Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator;
| 型号： | LTMM-04-02-S-D |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator |
| 文件： | 总4页 (文件大小：319K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LTMM-1XX-XX-XX-D-XX-XX
NOTES:
REVISION AR
C
1.
REPRESENTS A CRITICAL DIMENSION.
POLARIZED OPTION
XX INDICATES POS TO BE OMMITTED
No OF POSITIONS
-02 THRU -25
2. MAXIMUM PIN ROTATION: 2°.
3. MINIMUM PUSHOUT FORCE: 1 LB.
4. NOTE DELETED.
TERMINAL STYLE
OPTION
5. MINIMUM RETENTION FOR LOCKING CLIPS: 12 OZ.
6. MUST BE MEASURED AT BEND.
-01: .100[2.54] POST HEIGHT (STANDARD)
-02: .120[3.05] POST HEIGHT
(SEE TABLE 1)
LEAVE BLANK FOR THROUGH HOLE
(SEE FIG 1 & TABLE 1)
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
DO NOT
SCALE FROM
THIS PRINT
-RA: RIGHT ANGLE
(SEE FIG 2, SHT 2 & TABLE 1)
-SM: SURFACE MOUNT
(SEE FIG 3, SHT 3 & TABLE 1)
-LC: LOCKING CLIP (SEE NOTE 7)
(USE LC-05-TM FOR TH STYLE,
SEE FIG 1)
PLATING SPECIFICATION
-G: 20µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(NO OF POS X .07874[2.0000] + .0938[2.383])REF
(USE LC-07-TM FOR -SM STYLE,
SEE FIG 3, SHT 3)
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(NOT AVAILABLE FOR -RA STYLE)
-P: PICK & PLACE PAD
(USE PPP-24, SEE FIG 4, SHT 2)
(-SM OPTION ONLY)
(NO OF POS X .07874[2.0000] + .0238[.605])REF
.07874 2.0000 REF
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.020 0.51
REF
-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL
(ONLY AVAILABLE IN 04-25 POSITIONS)
-M: METAL PICK AND PLACE PAD
(USE MPP-07, SEE FIG 5, SHT 2)
(-SM OPTION ONLY)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
02 04
-TM: MATTE TIN ON ENTIRE PIN
-LM: 15µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-K: POLYIMIDE FILM
.07874 2.0000
REF
(USE K-DOT-.295-.406-.005)
(SEE FIG 6, SHT 3)
(-SM OPTION ONLY)
C
L
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-TR: TAPE AND REEL
(SEE FIG 7, SHT 4)
(-SM OPTION ONLY)
01
03
C
L
ROW SPECIFICATION
-D: DOUBLE (USE LTMM-XX-D-LC)
.1774 4.506
REF
(NO OF POS - 1) X .07874[2.00] REF
.2374 6.030
REF
.140 3.56 REF
ONLY FOR POS
-05 THRU -25
2
MAX SWAY
FIRST POSITION
INDICATOR
2
MAX SWAY
PIN A
(EITHER DIRECTION)
(EITHER DIRECTION)
"A"
CONTACT AREA
C
.125 3.18 REF
"A"
.190 4.83
REF
.075 1.91
"B"
.015 0.38 REF
.010 0.25 REF
LC-05-TM
"A"
.020 0.50 SQ
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
.056 1.42 REF
2
MAX SWAY
(EITHER DIRECTION)
(NO OF POS X .07874[2.0000] + .0598[1.519]) .003[0.76]
FIG 1
SECTION "A"-"A"
THROUGH HOLE
LTMM-112-02-XX-D-LC SHOWN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:LTMM ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOSPHER BRONZE
DWG. NO.
LTMM-1XX-XX-XX-D-XX-XX
BY:
BRYAN T
05/28/1992 SHEET 1 OF 4
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
.07874 2.0000 REF
REVISION AR
2
MAX SWAY
C
(EITHER DIRECTION)
"A"
02 04
"B"
"C"
PIN A
.090 2.29 REF
90°±2°
01 03
PIN B
CONTACT AREA
"B"
IN-PROCESS
-RA
C
.060 1.53
.0787±.0050 1.999±0.127
C
"B"
PIN A
PIN B
SECTION "B"-"B"
FIG 2
RIGHT ANGLE
LTMM-108-01-XX-D-RA SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: "R" = USED MEASURED DIMENSION
"S" = {("R"-.250 [6.35]) /2} ±.020 [0.51]
"R" REF
.250 6.35 REF
MPP-07
"S"
.360 9.14 REF
"R" REF
.325 8.26 REF
.237 6.03
REF
"S"
.050 1.27
REF
PPP-24
FIG 5
-M: METAL PICK AND PLACE PAD
LTMM-108-01-XX-D-SM-LC-M SHOWN
FOR SURFACE MOUNT OPTIONS ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
.240 6.10
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
C
L
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
FIG 4
-P: PICK AND PLACE PAD
NOTE: "R" = USED MEASURED DIMENSION
"S" = {("R"-.325 [8.26]) /2} ±.020 [.51]
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
LTMM-108-01-XX-D-SM-LC-P SHOWN
FOR SURFACE MOUNT OPTIONS ONLY
(ONLY AVAILABLE IN 04-25 POSITIONS)
LTMM ASSEMBLY
NO.
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
DWGL. TMM-1XX-XX-XX-D-XX-XX
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
BY:
BRYAN T
05/28/1992 SHEET 2 OF 4
PIN A
PIN A
REVISION AR
"A" - .035[.89]
02 04
.275 6.99
.085 2.16 REF
"B"
IN-PROCESS 2
IN-PROCESS 1
-SM
-SM
C
01 03
L
2
MAX SWAY
(EITHER DIRECTION)
PIN A
.015 0.38
REF
+3°
-2°
90°
CONTACT AREA
.035 0.89 REF
"C"
C
.240 6.10
(SEE NOTE 6)
.004[.10]
.055 1.40
C
C
L
.050 1.27 REF
.1143 2.904 REF
.3074 7.809 REF
"C"
.010 0.25 REF
LC-07-TM
NO OF POS X .07874[2.0000] + .0598[1.519]
SECTION "C"-"C"
FIG 3
SURFACE MOUNT
LTMM-108-01-XX-D-SM-LC SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" REF
(SEE NOTE)
"S"
(SEE NOTE)
.019±.010 0.48±0.25
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.295 7.50 REF
.258 6.56
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
FIG 6
-K OPTION (POLYIMIDE FILM)
LTMM-108-01-XX-D-SM-K SHOWN
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
LTMM ASSEMBLY
NOTE: "R" = USED MEASURED DIMENSION
"S" = {("R"-.2953 [7.500]) /2} ±.020 [.51]
FOR SURFACE MOUNT OPTIONS ONLY
DWG. NO.
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
LTMM-1XX-XX-XX-D-XX-XX
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
BY:
BRYAN T
05/28/1992 SHEET 3 OF 4
REVISION AR
PT-1-24-02-38
POLARIZATION NOTCH
ANTI-STATIC
POSITION 01
PT-1-24-03-38
ANTI-STATIC
PT-1-24-06-29
ANTI-STATIC
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
FIG 7
PT-1-24-03-38
SCALE 1:1
TAPE & REEL VIEW
ANTI-STATIC
PT-1-24-01-45
TABLE 2
OPTIONS
STANDARD, -LC
-SM, -SM-LC, -SM-M
-SM-LC-P,-SM-P
-RA
PACKAGING TUBE
PLUG
TP-03
TP-03
TP-07
TP-03
PT-1-24-02-38
PT-1-24-03-38
PT-1-24-06-29
PT-1-24-01-45
ANTI-STATIC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
FIG 8
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
LTMM ASSEMBLY
TUBE PACKAGING VIEW
DWG.LTMM-1XX-XX-XX-D-XX-XX
NO.
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
BY:
BRYAN T
05/28/1992 SHEET 4 OF 4
相关型号：
LTMM-05-01-TM-D
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator
SAMTEC
LTMM-10-02-FM-D
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator
SAMTEC
LTMM-10-02-L-D
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator
SAMTEC
LTMM-10-02-SM-D
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Guide Slot, Black Insulator
SAMTEC
LTMM-102-01-L-D-SM-K
Board Connector, 4 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明