MEC1-105-02-S-D-A [SAMTEC]
Card Edge Connector;
| 型号： | MEC1-105-02-S-D-A |
| 厂家： | 
SAMTEC |
| 描述： | Card Edge Connector 连接器 |
| 文件： | 总2页 (文件大小：333K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MEC1-1XX-XX-XX-D-XX-XX
REVISION AQ
OTHER OPTIONS
(No OF POS -1) x .03937 [1.00]
No OF POSITIONS
-LC: LOCKING CLIP (SEE NOTE 8)
(SEE FIG 2)(USE LC-05-TM)
-A: ALIGNMENT PIN
.109 2.77
REF
05, 08, 10, 20, 30, 40 , 50, 60 & 70
DO NOT
SCALE FROM
THIS PRINT
C
(PER ROW, SEE TABLE 2)
({(No OF POS +2) x .03937 [1.00]}
(MOLDED, SEE FIG 4, SHT 2)
(USE MEC1-XX-X-D-X-A)
.007[.18]
.005[.13]
+ .100 [2.54])
CARD THICKNESS
-K: POLYIMIDE FILM PAD
-02: .062 [1.58] THICK CARD
(SEE FIG 6, SHT 2)(USE K-DOT-.310-.406-.005)
-TR: TAPE & REEL PACKAGING
(N/A IN 70 POSITION)(SEE FIG 5, SHT 2)
.026 0.66 REF
(USE MEC1-XX-S-D-X-X)
16
40
02
FLOW INHIBITORS
AT VENDOR DISCRETION
PLATING SPECIFICATION
POLARIZED OPTION (SEE TABLE 2)
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.275 6.99
REF
-BLANK: BODY IS POLARIZED
-NP: NO POLARIZATION (-05 THRU -30 ONLY)
(USE MEC1-XX-X-D-N-X)
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.072 1.83 REF
15
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
1.5° MAX SWAY
(ANY DIRECTION)
39
ROW SPECIFICATION
-D: DOUBLE ROW
(USE MEC1-XX-X-D-X-X)
01
MEC1-XX-X-D-X-X
-FM: 3µ" FLASH GOLD IN CONATACT AREA,
MATTE ON TIN TAIL
-LM: 10µ" LIGHT IN CONTACT AREA,
MATTE TIN ON TAIL
C
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.050 1.27
FIG 1
(No OF POS +2) x
.03937 [1.00] REF
MEC1-120-02-X-D SHOWN
C
+.007
-.010
+0.18
.160 4.07 REF
.020
0.51
-0.25
SEE NOTE 5
"A"
.006 0.15 REF
SEE NOTE 2
.320 8.13
REF
C
.350 8.89
REF
+.004
-.002
+0.10
9.04
-0.05
90°±3°
.356
"A"
.334 8.49
C-113-02-XX
.030 0.75
.079 2.00
SECTION "A"-"A"
PACKAGING VIEW
40
39
02
01
IN-PROCESS
(FILL STEP)
MEC1-XX-X-D-N-X
-D-A-K, -D-K
NO -K OPTION
TUBE: PT-1-24-01-69
PLUG: TP-07
FOR -K OPTION
C
TUBE: PT-1-24-09F-109
-NP: NON-POLARIZED OPTION
(AVAILABLE ON -05, -08, -10, -20 & -30 POS. ONLY)
(SHOWN: MEC1-120-02-X-D-NP)
PLUG: TP-29
+.005
-.000
.535
13.59+0.13
0.00
NOTES:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
1. MINIMUM PUSHOUT FORCE: 10 oz.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
C
2. COPLANARITY: POS -05 THRU -26: .004 [.10]
POS -27 THRU -70: .006 [.15]
DECIMALS
ANGLES
2
C
3.
REPRESENTS A CRITICAL DIMENSION.
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
4. PACKAGE ALL POSITIONS IN TUBES.
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
(WITH -K OPTION, USE PT-1-24-09F-109 TUBE & TP-29 TUBE PLUG)
(WITHOUT -K OPTION, USE PT-1-24-01-69 TUBE & TP-07 TUBE PLUG)
5. MAXIMUM CUT FLASH: .010; FLASH NOT TO EXTEND BELOW LEADS.
6. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH AFTER ASSEMBLY.
.XXXX: .0015 [.038]
e-Mail: info@SAMTEC.com
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR:
1mm MINI-EDGE CARD ASSEMBLY
VECTRA E130i COLOR: BLACK
DWMG. EC1-1XX-XX-XX-D-XX-XX
NO.
7. MAXIMUM BURR: .003[.08], BURR DIRECTION TO BE OPPOSITE OF SOLDER PAD AREA
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
CONTACT:
BeCu 190 HM
SHEET 1 OF 2
BY:
KEVIN B
5/11/2000
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
REVISION AQ
FIG 5
.059 1.50 (TYP)
-TR: TAPE & REEL PACKAGING VIEW
(NOT DRAWN TO SCALE)
LC-05-TM
.010 0.25 REF
C
.056 1.42 REF (TYP)
POSITION 1
2 MAX SWAY
(EITHER DIRECTION)
C
({(No OF POS +2) x .03937[1.00]}
+ .0490[1.245]) .005[.13]
FIG 2
-LC OPTION
(SHOWN: MEC1-120-02-X-D-LC)
.0625 1.588 REF
MEC1-XX-X-D-X-A
.035 0.89 REF
(TYP)
.055 1.40 REF
({(No OF POS +2) x .03937[1.0000]}
+ .0490[1.245]) REF
FIG 4
.0625 1.59 REF
-A: ALIGNMENT PIN OPTION (MOLDED)
(SHOWN: MEC1-120-02-X-D-A)
.376 9.55 REF
FIG 6
USER DIRECTION OF UNREELING
-K: POLYIMIDE FILM PAD OPTION
(SHOWN: MEC1-120-02-X-D-K)
"M"
"P"
.018±.020 0.44±0.51
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
02
16
15
40
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
01
39
DESCRIPTION:
.361 9.17
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
1mm MINI-EDGE CARD ASSEMBLY
DWG. NO.
.310 7.87
MEC1-1XX-XX-XX-D-XX-XX
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .310 [7.87]) / 2} .020 [.51]
BY:
KEVIN B
5/11/2000
SHEET 2 OF 2
相关型号：
MEC1-105-02-S-D-EM1
Card Edge Connector, 10 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
MEC1-105-02-SM-D-RA1
Card Edge Connector, 10 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明