MEC8-130-01-SM-D-RA2-TR [SAMTEC]
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal;
| 型号： | MEC8-130-01-SM-D-RA2-TR |
| 厂家： | 
SAMTEC |
| 描述： | Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal |
| 文件： | 总4页 (文件大小：653K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION S
MEC8-1XX-XX-XX-D-RXX-XX
No OF POSITIONS (PER ROW)
(No OF POS x 0.800[.0315]) + 3.00[.118] REF
OPTION
C
-TR: TAPE & REEL
-10, -20, -30, -35 (SEE FIG. 1)
-40 & -50 (SEE FIG. 2, SHEET 2)
-13, -25, -37, -49 (-02 CARD
THICKNESS ONLY, SEE FIG. 2)
1.90 .07
REF
(No OF POS -1) x 0.800[.0315]
TAIL OPTION
0.80±0.05 .031±.002
(TOL NON-ACCUM)
DO NOT
SCALE FROM
THIS PRINT
-RA1: STANDARD (SEE FIG. 1)
(USE MEC8-XX-XX-D-RA1,
C-173-01-X & C-174-XX-X)
-RA2: ELEVATED (SEE FIG. 3)
(USE MEC8-XX-XX-D-RA2,
C-173-02-X & C-174-02-X)
-RL1: LATCHING (SEE FIG.4)
(USE MEC8-XX-XX-D-RL1,
C-173-01-X, C-174-03-X &
WT-25-03-T, AVAILABLE IN
POS -13, -25, -37 & -49)
CARD THICKNESS
70
C
L
02
*
-01: 1mm [.039] THICK CARD
(USE MEC8-XX-01-D-RAX)
** -02: 1.57mm [.062] THICK CARD
(USE MEC8-XX-02-D-RAX)
7.40 .29
REF
PLATING
S
POSITION #1
INDICATOR
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
ROW SPECIFICATION
-D: DOUBLE
(USE MEC8-XX-XX-D-RXX)
01
-LM: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
69
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
0.80±0.05 .031±.002
(TOL NON-ACCUM)
= NOT TOOLED
**= SEE NOTE 4
*
FIG 1
ROW 2
(SEE TABLE 2)
FOR POSITIONS -10, -20, -30 & -35
(SHOWN: MEC8-135-01-XX-D-RA1)
6.25 .246 REF
0.85±0.08 .033±.003 (TYP)
C
(No OF POS x 0.800[.0315]) + 1.40[.055] REF
ROW 1
0.85±0.08 .03±.003
C
L
(SEE TABLE 2)
C
"A"
C
L
"A" REF
C
"B" 0.15[.006]
C
"D" (TYP)
"C" REF
C
SEE TABLE 1
"A"
2.65 .10
REF
0.95 .04
REF (TYP)
0.90 .04 REF
1.40 .06 REF
1.05 .04 REF (TYP)
0.95 .037 REF (TYP)
(No OF POS + 2) x 0.80[.031] REF
0.20 .01 REF (TYP)
9.10 .36 REF
C
L
SECTION "A"-"A"
MEC8-XX-XX-D-RA1
1.40 .06
REF
C
L
DESIGNED & DIMENSIONED
IN MILLIMETERS
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(INCHES FOR REFERENCE ONLY)
DECIMALS
ANGLES
.X: .3 [.01]
.XX: .13 [.005]
.XXX: .051 [.0020]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
SHEET SCALE: 2.25:1
MATERIAL:
FLAMMABILITY RATING: UL 94V-O
DO NOT SCALE DRAWING
DESCRIPTION:
2. BURR ALLOWANCE: 0.038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: .5 LB.
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
INSULATOR: LCP
MNEOC. 8-1XX-XX-XX-D-RXX-XX
DWG.
-01: COLOR: NATURAL
4. -02 CARD THICKNESS ONLY AVAILABLE ON -RA1 & -RL1
TAIL OPTION.
-02: COLOR: BLACK
CONTACT: PHOS BRONZE
WELB TABS: PHOS BRONZE
5. PARTS TO BE PACKAGED IN TRAYS UNLESS OTHERWISE SPECIFIED.
SHEET 1 OF 4
BY:
KEVIN B
10/18/01
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
C
REVISION S
((No OF POS + 3) x 0.800[.0315]) 0.13[.005]
C
C
1.90 .07
REF
"E" 0.13[.005]
4.00 .16
0.80±0.05 .031±.002
(TOL NON-ACCUM)
80
FIG 2
02
FOR POSITIONS -13, -25, -37, -40, -49 & -50
(FOR -13, -25, -37 & -49: -02 CARD THICKNESS ONLY)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-140-01-XX-D-RA1)
01
79
0.80±0.05 .031±.002
(TOL NON-ACCUM)
C
C
"E" 0.13[.005]
4.00 .16
C
(No OF POS + 3) x 0.800[.0315]
(No OF POS x 0.80[.031]) + 6.20[.244] REF
"H" REF
"F" REF
"G" REF
S
(No OF POS + 6) x 0.80[.031] REF
C
L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
L
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
DWG. NO.
MEC8-1XX-XX-XX-D-RXX-XX
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
BY:
KEVIN B
10/18/01
SHEET 2 OF 4
REVISION S
FIG 3
-RA2: ELEVATED OPTION
(SAME AS FIG 2, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-150-01-XX-D-RA2)
* = NOT TOOLED
MEC8-XX-01-D-RA2
"C"
ROW 1
ROW 2
(SEE TABLE 2)
(SEE TABLE 2)
"A" REF
(SEE TABLE 2)
C
"D" TYP
(SEE TABLE 2)
"C" REF
(SEE TABLE 2)
"B" .15[.006]
(SEE TABLE 2)
4.65 .18
REF
"C"
SECTION "C"-"C"
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
DWG.
MNEOC. 8-1XX-XX-XX-D-RXX-XX
KEVIN B
10/18/01
SHEET 3 OF 4
BY:
REVISION S
(No OF POS x 0.80[.03]) + 17.20[.68] REF
1.00 .04 REF
"F"
"F"
1.45 .06
REF
0.60 .02 REF
3.30 .13 REF
0.56 .02 REF
4.50 .18
REF
7.74 .30
REF
0.30 .01 REF
SECTION "F"-"F"
3.00 .12 REF
MEC8-XX-XX-D-RL1
1.25 .05 REF
2.00 .08 REF
WT-25-03-T
C
2.12 .08
(No OF POS x 0.800[.031]) + 14.95[.589]
FIG 4
-RL1: LATCHING OPTION
(SAME AS FIG 2, UNLESS OTHERWISE STATED)
(SHOWN: MEC8-125-01-XX-D-RL1
(AVAILIBLE ONLY IN POS
-13, -25, -37 & -49)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
0.8mm [.031"] RIGHT ANGLE EDGE CARD ASSEMBLY
NO.
DMWG. EC8-1XX-XX-XX-D-RXX-XX
KEVIN B
10/18/01
SHEET 4 OF 4
F:\DWG\MISC\MKTG\MEC8-1XX-XX-XX-D-RXX-XX-MKT.SLDDRW
BY:
相关型号：
MEC8-130-01-SM-D-RRA1-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-130-02-L-D-RRA1
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-130-02-L-DV-A
60 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SURFACE MOUNT, SOCKET, ROHS COMPLIANT
SAMTEC
MEC8-130-02-L-DV-A-K
Card Edge Connector, 60 Contact(s), 2 Row(s), Straight, 0.025 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle
SAMTEC
MEC8-130-02-L-DV-A-K-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
SAMTEC
MEC8-130-02-L-DV-K-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
SAMTEC
MEC8-130-02-LM-D-RRA1-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-130-02-SM-D-R-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-130-02-SM-D-RRA1
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-130-02-SM-D-RRA2-TR
Card Edge Connector, 60 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-135-01-L-D-R-TR
Card Edge Connector, 70 Contact(s), 2 Row(s), Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
MEC8-135-01-L-D-RA1
Card Edge Connector, 70 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
SAMTEC
©2020 ICPDF网 联系我们和版权申明