MMSD-1122-S-03.00-S [SAMTEC]
Board Connector, 11 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket;
| 型号： | MMSD-1122-S-03.00-S |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 11 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket |
| 文件： | 总3页 (文件大小：809K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION H
H MMSD-XX-XX-X-XX.XX-X-X-XXX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .003[.08] MAX.
3. PARTS TO BE MOLDED TO POSITION.
No OF POSITIONS
-02 THRU -25
H
OPTION
SINGLE
4. MINIMUM PIN PULLOUT FORCE: 4.000LB[17.79N]
5. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE.
6. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING HI-POT TEST.
7. TINNED COPPER WIRE CONTAINS LEAD.
(PER ROW)
**-M: METAL LATCH (USE IPD1-XX-D-X-M)
WIRE GAUGE (AWG)
(LEAVE BLANK FOR PLASTIC)
8. PARTS ARE TO BE LAYER PACKAGED.
-20
-22
-24
-26
-28
-30
9. MINIMUM METAL LATCH RETENTION FORCE: 1.000LB[4.45N]
10. SEE DWL-02-XX-X-XX.XX-X FOR CRIMP DIMENSIONS
C6-B-MM
DOUBLE
DO NOT
SCALE FROM
THIS PRINT
-LUS: PLASTIC LATCH UP, STRAIGHT
-LDS: PLASTIC LATCH DOWN, STRAIGHT
-LUX: PLASTIC LATCH UP, CROSSED
-LDX: PLASTIC LATCH DOWN, CROSSED
**-MUS: METAL LATCH UP, STRAIGHT
**-MDS: METAL LATCH DOWN, STRAIGHT
**-MUX: METAL LATCH UP, CROSSED
**-MDX: METAL LATCH DOWN, CROSSED
C1-A-DC
(No OF POS x .100[2.54])
+ .055[1.40] REF
PLATING SPECIFICATION
-F: FLASH SELECTIVE (USE C-179-XX-F)
-L: LIGHT SELECTIVE (USE C-179-XX-L)
-S: SELECTIVE (USE C-179-XX-S)
C2-A-DC
05
10
01
06
.356 9.04
.250 6.35
REF
POLARIZATION OPTION
ASSEMBLED LENGTH
REF
-P: POLARIZATION (SEE FIG. 3, SHEET 2)
(NOT AVAILABLE WITH -LUS, -LDS, -LUX, -K OPTIONS)
**-K: KEYED POLARIZATION
SPECIFY IN INCHES [USE DWC-XX-XX]
(SINGLE END: 03.00 INCH MINIMUM,
DOUBLE END: 03.25 INCH MINIMUM)
(USE IPD1-XX-X-K) (SEE FIG. 4, SHEET 2)
(NOT AVAILABLE WITH -P OPTION)
(LEAVE BLANK FOR NO POLARIZATION)
END OPTION
.100 2.54
REF
-S: SINGLE END
-D: DOUBLE END
(SEE OPTION)
IPD1-XX-D
**NOT RELEASED FOR PRODUCTION
"A"
.505 12.83
C3-A-DC
REF
.285 7.24
REF
DWL-02-XX-D-XX.XX-X
C
XX.XX .125[3.18]
DWL-02-XX-S-XX.XX-X
C
C4-B-GR
XX.XX .125[3.18]
C5-B-GR
"A"
SECTION "A"-"A"
FIG. 2
FIG. 1
MMSD-05-22-X-XX.XX-D SHOWN
MMSD-05-22-X-XX.XX-S SHOWN
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
HOUSING: NYLON 66, COLOR: WHITE
CONTACT: PHOS BRONZE
DWG. NO.
CABLE; INSULATION: PVC
MMSD-XX-XX-X-XX.XX-X-X-XXX
WIRE: TINNED COPPER
LATCH: NICKEL-PLATED BeCu, #25, 1/2 HT
F:\DWG\MISC\MKTG\MMSD-XX-XX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
DEAN P
07/16/2004 SHEET 1 OF 3
REVISION H
01
N
N/2
N
N/2
N
N/2
N/2 + 1
N
N/2
N/2 + 1
01
(SEE TABLE 2)
(SEE TABLE 2)
N/2 + 1
01
(SEE TABLE 2)
N/2 + 1
01
LATCH-
END 2
(SEE TABLE 2)
LATCH-
END 1
LATCH-
END 1
LATCH-
END 2
-LUS
-LDS
[LATCH UP - CABLE STRAIGHT]
[LATCH DOWN - CABLE STRAIGHT]
(POS. 1 LATCH-END 1 TO POS. N/2 LATCH-END 2)
(POS. 1 LATCH-END 1 TO POS. (N/2 + 1) LATCH-END 2)
N
N/2
01
N/2 + 1
N
N/2
N
N/2
N/2 + 1
01
(SEE TABLE 2)
N/2
N
N/2 + 1
01
(SEE TABLE 2)
N/2 + 1
01
(SEE TABLE 2)
(SEE TABLE 2)
LATCH-
END 1
LATCH-
END 2
LATCH-
END 1
LATCH-
END 2
-LUX
-LDX
[LATCH UP - CABLE CROSSED]
[LATCH DOWN - CABLE CROSSED]
(POS. 1 LATCH-END 1 TO POS. 1 LATCH-END 2)
(POS. 1 LATCH-END 1 TO POS. N LATCH-END 2)
FIG. 4
FIG. 3
-P: POLARIZATION
-K: KEYED POLARIZATION
(MMSD-06-XX-X-XX.XX-X-P SHOWN)
(NOT AVAILABLE WITH -LUS, -LDS, -LUX OPTIONS)
(MMSD-06-XX-X-XX.XX-X-K-XXX SHOWN)
(NOT AVAILABLE WITH -P OPTION)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
NOT RELEASED FOR PRODUCTION
PROPRIETARY NOTE
02 01
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
.022 0.56 REF
.021 0.54 REF
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
IPD1-XX-D-P
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
IPD1-XX-D-K
DESCRIPTION:
07
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
MMSD-XX-XX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\MMSD-XX-XX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
DEAN P
07/16/2004 SHEET 2 OF 3
FIG. 5
REVISION H
(MMSD-06-XX-X-XX.XX-S-M SHOWN)
(SAME AS FIG.1, UNLESS OTHER WISE STATED)
NOT RELEASED FOR PRODUCTION
.260 6.60 REF
C8-B-CP
IPD1-XX-D-X-M
.621 15.76
.104 2.64 REF
C7-B-CP
REF
C9-A-DC
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE
START-UP INSPECTION
INSPECT CODE A
IN-PROCESS INSPECTION
ASSEMBLY OPERATION
INSPECT CODE B
ASSEMBLE MMSD-XX-XX-X-XX.XX-X-X-XX-XXX C1, C2, C3
ASSEMBLE METAL IPD1-XX-D-X-M C9
C4, C5, C6
C7, C8
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
MMSD-XX-XX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\MMSD-XX-XX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
DEAN P
07/16/2004 SHEET 3 OF 3
相关型号：
MMSD-12-20-F-03.00-S-K-LDS-M
Board Connector, 24 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSD-12-20-F-03.00-S-K-LUX
Board Connector, 24 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSD-12-20-F-03.00-S-LUS-M
Board Connector, 24 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSD-12-20-F-03.00-S-MDS-M
Board Connector, 24 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSD-12-20-F-03.00-S-P-LDX
Board Connector, 23 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSD-12-20-F-03.00-S-P-LDX-M
Board Connector, 23 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明