MMSS-02-20-F-03.00-S-M [SAMTEC]
Board Connector;
| 型号： | MMSS-02-20-F-03.00-S-M |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector |
| 文件： | 总3页 (文件大小：381K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
REVISION AH
MMSSX-XX-XXX-X-XX.XX-X-X-XXX
2. BURR ALLOWANCE: .003[0.08] MAX.
3. PARTS TO BE MOLDED TO POSITION.
OPTION
SINGLE
FEP CABLE OPTION
-T: FEP INSULATION
(LEAVE BLANK FOR
4. MINIMUM PULLOUT FORCE: 5 lbs [22.24 N].
DO NOT
SCALE FROM
THIS PRINT
5. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS
INTO PLACE.
-M: METAL LATCH (USE IPD1-XX-S-X-M)
(LEAVE BLANK FOR PLASTIC)
C
STANDARD PVC INSULATION)
(SEE NOTE 13)
6. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING
HI-POT TEST @ 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST,
LABEL EACH ASSEMBLY WITH 1 ET STAMP ON THE BODY.
7. TINNED COPPER WIRE IS ROHS COMPLIANT.
DOUBLE
[MUST BE USED ON -D END OPTION ONLY
& APPLIES TO END 2 HOUSING]
-LUS: PLASTIC LATCH UP, STRAIGHT
-LDS: PLASTIC LATCH DOWN, STRAIGHT
-MUS: METAL LATCH UP, STRAIGHT
-MDS: METAL LATCH DOWN, STRAIGHT
No OF POSITIONS
-02 THRU -25
8. FOLLOW CO-RF-WI-3001-M AND SAMTEC PACKAGING STANDARDS.
9. CONTACTS OFFSET FOR POLARIZATION.
10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP
DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTS.
11. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL BE ±.125[3.18].
FOR OTHER LENGTHS, TOLERANCES SHALL BE ± 2%.
12. GOLD PLATING IS NOT REQUIRED ON THE OUTSIDE OF THE CONTACT
BOX OR ON THE SIDE WITH THE RETENTION LANCE.
13. ASSEMBLIES USING THE FEP OPTION ARE
WIRE GAUGE (AWG)
PVC:-20, -22, -24, -26, -28, -30
FEP:-20, -24, -28, 30
OPTION
-K: KEYED POLARIZATION
(USE IPD1-XX-S-K)
(SEE FIG 3, SHEET 2)
(LEAVE BLANK FOR NO POLARIZATION;
AVAILABLE TO EXISTING CUSTOMERS ONLY)
COLOR CODE
C (SEE TABLE 2)
(LEAVE BLANK FOR
FOR CRIMP APPLICATIONS ONLY.
14. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR.
STANDARD BLACK CABLE)
(NOT AVAILABLE WITH FEP OPTION)
(No OF POS x .100[2.54])
+ .055[1.40] REF
02 01
END OPTION
-S: SINGLE END
-D: DOUBLE END(MUST CHOOSE XUS OR XDS OPTIONS.)
PLATING SPECIFICATION
-F: FLASH SELECTIVE (USE C-179-XX-F)
-L: LIGHT SELECTIVE (USE C-179-XX-L)
-S: SELECTIVE (USE C-179-XX-S)
.300 7.62
REF
.200 5.08
REF
ASSEMBLED LENGTH
C
L
SPECIFY IN INCHES [USE DWCX-XX-XX]
(SINGLE END: 03.00[76.2] INCH MINIMUM,
DOUBLE END: 03.25[82.6] INCH MINIMUM)
.010 0.25 REF
(SEE NOTE 9)
IPD1-XX-S
"A"
C-179-XX-X
.505 12.83
REF
.285 7.24
REF
C
XX.XX
(SEE NOTE 11)
DWC-XX-10-300
C
XX.XX
(SEE NOTE 11)
FIG 2
"A"
SECTION "A"-"A"
MMSS-05-22-X-XX.XX-D-LUS SHOWN
FIG 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
MMSS-05-22-X-XX.XX-S SHOWN
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100[2.54] SOCKET DISCREET CABLE ASSEMBLY
HOUSING: NYLON 6/6, COLOR: WHITE
CONTACT: PHOS BRONZE
DWG. NO.
CABLE; INSULATION: SEE CALLOUT
WIRE: TINNED COPPER
MMSSX-XX-XXX-X-XX.XX-X-X-XXX
SHEET 1 OF
3
BY: DEAN P
05/03/2005
F:\DWG\MISC\MKTG\MMSSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
REVISION AH
01
N
N
N
N
01
01
01
LATCH-
END 2
LATCH-
END 1
LATCH-
END 1
LATCH-
END 2
-LDS
-LUS
[LATCH UP- CABLE STRAIGHT]
[LATCH DOWN- CABLE STRAIGHT]
FIG 3
-K: KEYED POLARIZATION
(MMSSX-06-XX-X-XX.XX-X-K-XXX SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
.023 0.59 REF
.027 0.68 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
IPD1-XX-S-K
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.100[2.54] SOCKET DISCREET CABLE ASSEMBLY
DWG. NO.
MMSSX-XX-XXX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\MMSSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
SHEET 2 OF
3
BY: DEAN P
05/03/2005
FIG 4
REVISION AH
(MMSSX-06-XX-X-XX.XX-S-M SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
CABLE CUT IN-PROCESS
C
+.010
- .005
+0.25
5.33
- 0.13
.210
"A"
(SEE TABLE 1, SHT 1)
"A"
(SEE TABLE 1, SHT 1)
IPD1-XX-S-X-R
C
+.003
- .002
+0.08
.618 15.70
REF
.109
2.77
- 0.05
OVERALL LENGTH
(SEE TABLE 3)
OVERALL LENGTH
(SEE TABLE 3)
LTC-14-01-N
"A"
(SEE TABLE 1, SHT 1)
-S: SINGLE END
-D: DOUBLE END
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
.100[2.54] SOCKET DISCREET CABLE ASSEMBLY
DWG. NO.
MMSSX-XX-XXX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\MMSSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
SHEET 3 OF
3
BY: DEAN P
05/03/2005
相关型号：
MMSS-02-20-F-03.01-S-K
Board Connector, 2 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSS-02-20-F-06.50-S-K
Board Connector, 2 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
MMSS-02-20-F-10.00-S-K
Board Connector, 2 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket
SAMTEC
MMSS-02-20-F-20.00-S-K
Board Connector, 2 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket
SAMTEC
©2020 ICPDF网 联系我们和版权申明