MPCC-2-16-2-L-44-05.94-S [SAMTEC]
Board Connector,;
| 型号： | MPCC-2-16-2-L-44-05.94-S |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, |
| 文件： | 总3页 (文件大小：449K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
SEE NOTE 12
MPCC-X-XX-X-X-XX-XX.XX-X-XXX
REVISION L
NXX OPTION (END 2)
POWER PINS
(ONLY AVAILABLE WITH -D,
LEAVE BLANK FOR -S OPTION)
(APPLIES TO SIGNALS ONLY,
POWER STRAIGHT THRU)
-NUS: NOTCH UP, STRAIGHT
(PIN A1 TO PIN AX)
(PER END)
-2
FIG 1
C-281-XXXX-X
C-246-XX-X
MPCC-2-16-2-X-XX-XX.XX-S SHOWN
DO NOT
SCALE FROM
THIS PRINT
SIGNAL PINS
(SEE TABLE 2, SHT 2 FOR
AVAILABLE COMBINATIONS)
-16 (4x4)
"B"
*NDS: NOTCH DOWN, STRAIGHT
(PIN A1 TO PIN A4)
-24 (4x6)
POWER PINS
(PER END)
-2
*NUX: NOTCH UP, CROSSED
(PIN A1 TO PIN DX)
8.70 .343
REF
10.16 .400
REF
*NDX: NOTCH DOWN, CROSSED
(PIN A1 TO PIN A1)
PLATING
-L: POWER PINS: 10µ" SELECTIVE GOLD
IN CONTACT AREA, MATTE TIN ON TAIL
SIGNAL PINS: 10µ" SELECTIVE GOLD
IN CONTACT AREA, BRIGHT ACID TIN
ON TAIL
END OPTION
ASSEMBLED LENGTH
"B"
"B"
-S: SINGLE ENDED
-D: DOUBLE ENDED
(MUST CHOOSE
(INCHES)
"C" REF
04.00 INCH MINIMUM
LEAD STYLE
2.00 .079
REF (TYP)
FROM -NXX OPTIONS)
-T: POWER PINS: MATTE TIN OVER ENTIRE PIN
SIGNAL PINS: 10µ" SELECTIVE GOLD
IN CONTACT AREA, BRIGHT ACID TIN
-44 (14 AWG PWR, 24 AWG SIG)
-46 (14 AWG PWR, 26 AWG SIG)
-48 (14 AWG PWR, 28 AWG SIG)
-40 (14 AWG PWR, 30 AWG SIG)
-64 (16 AWG PWR, 24 AWG SIG)
-66 (16 AWG PWR, 26 AWG SIG)
-68 (16 AWG PWR, 28 AWG SIG)
-60 (16 AWG PWR, 30 AWG SIG)
"A" REF
MPC-XX-XX-XX
2.00 .079
REF (TYP)
6.00 .236
"A"
REF
* = NOT RELEASED
8.05 .317
REF
21.10 .831
FREF
18.60 .732
REF
C
LTC-22
ASSEMBLED LENGTH
(SEE NOTE 6)
SEE NOTE 3
SEE NOTE 3
1.75 .069 REF
NOTES:
1.02 .040 REF
C
1.
REPRESENTS A CRITICAL DIMENSION.
SECTION "B"-"B"
SCALE 3 : 1
2. MINIMUM PULLOUT FORCE: 11.1N [2.5LBS].
3. CONTACTS MUST BE INSERTED UNTIL RETENTION
FEATURES LOCK INTO PLACE.
SECTION "A"-"A"
SCALE 1.25 : 1
DWC-XX-10-XXX
"A"
C
C
4. ALL FINISHED GOODS ARE TO BE ELECTRICALLY
TESTED INCLUDING HI-POT TEST AT 1000 VOLTS DC.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH
(1) ET STAMP ON THE BODY.
PROPRIETARY NOTE
*
*
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
DIMENSIONS ARE IN MILLIMETERS.
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
6. FOR LENGTHS OF 12.00 INCHES AND LESS, TOLERANCE TO BE ± 3.18[.125],
FOR LENGTHS GREATER THAN 12.00 INCHES, TOLERANCE TO BE ± 2%
7. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIRENTS.
TOLERANCES ARE:
DECIMALS
ANGLES
2
X.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
X.XX: 0.13 [.005]
8. MINIMUM WIRE CRIMP STRENGTH: 24-28 AWG: 20.0N[4.5LB]
30 AWG: 13.3N[3.0 LB]
X.XXX: 0.051 [.0020]
SHEET SCALE: 1.5:1
DO NOT SCALE DRAWING
9. MINIMUM LATCH RETENTION: 4.4 N [1 LB].
10. MINIMUM DWC RETENTION: 22.2 N [5.0 LB]
DESCRIPTION:
MATERIAL:
MINI POWER COMBO CABLE ASSEMBLY
DWG. NO.
11. PARTS TO BE LAYER PACKAGED. COVER EACH CABLE END WITH BAG ASBBLT X.X x X.X.
FOR VERY SHORT CABLES THAT WILL FIT 100% WITHIN ONE BAG, USE ONLY ONE BAG AND SEAL.
12. ALL DIMS SHOWN IN METRIC EXCEPT FOR ASSEMBLY LENGTH ON PART CALL OUT.
13. NOT FOR SALE AS COMPONENTS; SOLD AS A CABLE ASSEMBLY ONLY.
INSULATOR: LCP UL 94V-0, COLOR: BLACK
CONTACT: BeCU
LATCH: NYLON
MPCC-X-XX-X-X-XX-XX.XX-X-XXX
WIRE: BLACK PVC COATED TINNED COPPER
14. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR.
BY:
D.SCHMELZ 05/26/2010 SHEET 1 OF 3
F:\DWG\MISC\MKTG\MPCC-X-XX-X-X-XX-XX.XX-X-XXX-MKT.SLDDRW
REVISION L
P1
P4
P3
P2
A6
A1
D6
D1
D6
A1
"A"
REF
"B"
REF
"C"
REF
A6
P3
P4
D1
P2
P1
ASSEMBLED LENGTH
(SEE NOTE 6)
C
FIG 3
MPCC-2-24-2-X-XX-XX.XX-D-NUS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 & 2)
(SEE NOTE 7)
(SEE NOTE 7)
OVERALL LENGTH "D"
(SEE TABLE 3)
OVERALL LENGTH "E"
(SEE TABLE 3)
(SEE NOTE 7)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-S: SINGLE END
-D: DOUBLE END
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
FIG 2
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
CABLE CUT IN-PROCESS
MINI POWER COMBO CABLE ASSEMBLY
DWG. NO.
MPCC-X-XX-X-X-XX-XX.XX-X-XXX
F:\DWG\MISC\MKTG\MPCC-X-XX-X-X-XX-XX.XX-X-XXX-MKT.SLDDRW
BY:
D.SCHMELZ 05/26/2010 SHEET 2 OF 3
IN-PROCESS 1
REVISION L
(APPLIES TO -S END OPTION ONLY)
(TO BE BUILT DOUBLE-ENDED INITIALLY FOR E-TEST,
THEN CUT IN HALF AND TRIMMED TO LENGTH)
ASSEMBLED LENGTH
(SEE NOTE 6)
(ASSEMBLED LENGTH X 2)
+ 25.4[1.00]
(SEE NOTE 6)
CUT LINE
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
MINI POWER COMBO CABLE ASSEMBLY
DWG. NO.
MPCC-X-XX-X-X-XX-XX.XX-X-XXX
F:\DWG\MISC\MKTG\MPCC-X-XX-X-X-XX-XX.XX-X-XXX-MKT.SLDDRW
BY:
D.SCHMELZ 05/26/2010 SHEET 3 OF 3
相关型号：
©2020 ICPDF网 联系我们和版权申明