QMS-026-02-L-D-RA-MG [SAMTEC]
Board Connector, 52 Contact(s), 2 Row(s), Female, Right Angle, 0.025 inch Pitch, Solder Terminal, Guide Pin, Black Insulator;
| 型号： | QMS-026-02-L-D-RA-MG |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 52 Contact(s), 2 Row(s), Female, Right Angle, 0.025 inch Pitch, Solder Terminal, Guide Pin, Black Insulator |
| 文件： | 总6页 (文件大小：1261K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
REVISION AA
PACKAGING OPTION
-TR: TAPE & REEL PACKAGING
(-026 & -052 WITH NO OPTIONS)
(-026 & -052 WITH -PC4)
(-026 WITH -PC8)
No OF POSITIONS
-026, -052, -078, -104
(PER ROW)
LEAD STYLE
OPTION
-01: .062[1.57] BOARD
-K: KAPTON PAD (USE K-850-650)
-PC4: 4 POWER PINS
C
-02: .093[2.36] BOARD
DO NOT
SCALE FROM
THIS PRINT
"L" REF
(SEE FIG. 2, SHEET 5)
(NOT AVAILABLE WITH -104 POS)
(NOT AVAILABLE WITH -MG)
-PC8: 8 POWER PINS
.250 6.35 (REF) (TYP)
(SEE FIG. 3, SHEET 5)
(NOT AVAILABLE WITH -104 POS)
(NOT AVAILABLE WITH -MG)
C
L
GUIDE POST
.466 11.84
REF
-MG: METAL GUIDE POST
(LEAVE BLANK FOR PLASTIC OR PCX.
PLASTIC AVAILABLE AS ASO ONLY.)
-RA: RIGHT ANGLE
.391 9.93
(REF)
ROW SPECIFICATION
-D: DOUBLE (USE QMS-XXX-01-D-XX-RA)
+.003
-.007
+0.08
5.72
-0.18
.225
PLATING SPECIFICATION
(SEE TABLE 6, SHEET 4)
-SL: 10µ” GOLD IN CONTACT AREA, MATTE TIN TAIL
-S: 30µ” GOLD IN CONTACT AREA, MATTE TIN TAIL
-L: 10µ” GOLD IN CONTACT AREA, 3µ” GOLD ON TAIL
-H: 30µ” GOLD IN CONTACT AREA, 3µ” GOLD ON TAIL
.145 3.68
QMS-026-01-D-02-RA-MG
C
C
(REF)
2
MAX SWAY (TYP)
WT-41-XX-R-T
(RIGHT SIDE)
(SEE TABLE 2)
WT-41-XX-L-T
(LEFT SIDE)
(SEE TABLE 2)
"M"
C
"N"
.8400 21.336
.1075 2.731
C
25 EQ SPACES
@.0250[.635] =
.625 [15.88]
01
C
L
"A"
.080 2.03
(TYP)
.320 8.13
(REF)
C
L
"K"
C
"A"
'D'
02
'B'
.062 1.57 REF
(SEE TABLE 2, SHT 2)
8 EQ SPACES
@ .0750 [1.905] =
.600 [15.24]
.025 0.64 SQ. (REF) (TYP)
C
.120 3.05 (SEE NOTE 5)
C
C
FIG. 1
"P"
(QMS-052-XX-XX-D-RA-MG SHOWN)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
NOTES:
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
1.
REPRESENTS A CRITICAL DIMENSION.
.XXX: .005 [.13]
2. MAXIUMU BURR ALLOWANCE: .0010 [0.02]
3. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, [2.22N]
SHIELD/GROUND, POWER PIN, COUNTERWEIGHT
AND METAL GUIDE POST: 1 LB. [4.45N]
.XXXX: .0020 [.051]
MATERIAL:
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
INSULATOR: LCP, COLOR BLACK
4. PARTS TO BE PACKAGED IN TRAYS AS STANDARD.
5. DOES NOT APPLY TO 1 BANK.
DWG. NO.
CONTACT, POWER PIN, & GROUND PLANE: PHOS BRONZE
COUNTERWEIGHT: BRASS
METAL GUIDE POST: ZINC
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
6. WT-28-XX-T NOT PRESENT ON SINGLE BANK WITH THE -MG OPTION
7. USE -Z- DATUM ZONE ONLY FOR MEASUREMENTS.
BY:
KNOWLDEN 8/25/2006
SHEET 1 OF 6
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
REVISION AA
WT-28-XX-T
(SEE NOTE 6)
(SEE TABLE 2)
T-1M46-01-XX
(SEE TABLE 6)
.012 0.30
(REF)
T-1M45-01-XX
(SEE TABLE 6)
-C-
.0250 0.635
REF
"A"
T-1M45-01-XX-X
(SEE TABLE 6)
(SEE NOTE 7)
C
C
IM-1G27-XX-X
(SEE TABLES 2 & 6)
.013 0.32
SEE TOP ROW-TAIL DETAIL
DETAIL 'B'
C
.115±.002 2.92±0.05
T-1M46-01-XX-X
(SEE TABLE 6)
-C-
"J"
(SEE TABLE 2)
(SEE NOTE 7)
C
SEE TABLE 1
C
TOP ROW & BOTTOM ROW
(LOCATE ASSY ON DATUM -C-
FOR MEASUREMENT)
SEE BOTTOM ROW-TAIL DETAIL
.030 0.76
REF
.030 0.76
REF
.004±.002 0.10±0.05
(BOTTOM ROW)
(MEAS BOTH ENDS)
(SEE NOTE 7)
+.008[0.00]
-.005[0.20]
"B"
.087 2.20
C
(SEE TABLE 2)
(SEE NOTE 7)
C
C
BOTTOM ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
.116 2.95
C
.191 4.85
.266 6.76
-C-
T-1M45-01-XX-X
(SEE TABLE 6)
C
SECTION "A"-"A"
SCALE 4 : 1
.004±.002 0.10±0.05
(TOP ROW)
(MEAS BOTH ENDS)
(SEE NOTE 7)
C
TOP ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
DWG. NO.
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
BY:
8/25/2006
SHEET 2 OF 6
KNOWLDEN
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
INSPECTION VIEW 1
REVISION AA
(FILL BOTTOM ROW)
-C-
Z2
Z1
T-1M46-01-XX
(SEE TABLE 6)
-C-
.116 2.95
C
SEE TABLE 1
WITHIN ROW
.004 0.10 REF
(BOTTOM ROW)
(SEE NOTE 7)
T-1M46-01-XX
(BOTTOM ROW)
(SEE TABLE 6)
.116 2.95 REF
"K"
"L"
IN-PROCESS 1
(FILL BOTTOM ROW)
(SEE INSPECTION VIEW 1 FOR ORIENTATION AND CPC'S)
C
Z2
Z1
SEE TABLE 1
WITHIN ROW
.004±.002 0.10±0.05
(BOTTOM ROW)
(SEE NOTE 7)
.004±.002 0.10±0.05
(BOTTOM ROW)
(SEE NOTE 7)
-C-
IM-1G27-XX-L
(SEE TABLES 2 & 6)
C
C
DETAIL "L"
SCALE 8 : 1
DETAIL "K"
SCALE 8 : 1
INSPECTION VIEW 2
(FILL IM-1G27)
T-1M46-01-XX
(SEE TABLE 6)
Z2
Z1
"B" REF
(SEE TABLE 2)
(SEE NOTE 7)
.191 4.85
REF
-C-
.191 4.85
C
IN-PROCESS 2
(FILL IM-1G27)
(SEE INSPECTION VIEW 2 FOR ORIENTATION AND CPC'S)
IM-1G27-XX-L
(SEE TABLES 2 & 6)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
Z1
Z2
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
"B"
(SEE TABLE 2)
(SEE NOTE 7)
"B"
(SEE TABLE 2)
(SEE NOTE 7)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
DWG. NO.
C
C
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
BY:
8/25/2006
SHEET 3 OF 6
KNOWLDEN
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
INSPECTION VIEW 3
-C-
REVISION AA
T-1M45-01-XX
(SEE TABLE 6)
(FILL TOP ROW)
"J"
IM-1G27-XX-L
(SEE TABLES 2 & 6)
.115 2.92 REF
SEE TABLE 1
WITHIN ROW
T-1M46-01-XX
(SEE TABLE 6)
.266 6.76
REF
.004 0.10 REF
(TOP ROW)
Z1
Z2
(SEE NOTE 7)
IN-PROCESS 3
-C-
.236 5.99
(FILL TOP ROW)
(SEE INSPECTION VIEW 3 FOR ORIENTATION AND CPC'S)
C
T-1M45-01-XX
(TOP ROW)
(SEE TABLE 6)
"N"
"M"
.115±.002 2.92±0.05
C
Z1
C
Z2
-C-
SEE TABLE 1
WITHIN ROW
.004±.002 0.10±0.05
(TOP ROW)
(SEE NOTE 7)
.004±.002 0.10±0.05
(TOP ROW)
(SEE NOTE 7)
C
C
DETAIL "N"
SCALE 8 : 1
DETAIL "J"
DETAIL "M"
SCALE 8 : 1
SCALE 6:1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
DWG. NO.
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
BY:
KNOWLDEN 8/25/2006 SHEET 4 OF 6
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
QMS-026-01-D-02-RA-PC4
REVISION AA
TERMINAL 3
(SEE TABLES 3 & 6)
T-1R37-XX-T
(SEE TABLE 2, SHEET 2)
TERMINAL 1
(SEE TABLES 3 & 6)
T-1R37-XX-T
(SEE TABLE 2)
.165 4.19
REF
TERMINAL 2
(SEE TABLES 3 & 6)
"H" REF (SEE TABLE 3)
"C"
(SEE TABLE 2, SHT 2)
C
T-1S69-01-XX
(SEE TABLES 3 & 6)
C
"Q" REF
"R" REF
C
.060 1.51
"C"
"C"
C
2
MAX TOE (TYP)
C
C
TERMINAL
PIN 3
.100 2.54
"D"
SECTION "C"-"C"
FIG 2
.076 1.92
(SEE TABLE 3)
TERMINAL
PIN 1
C
"E"
(QMS-052-XX-XX-D-RA-PC4 SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(SEE TABLE 3)
TERMINAL
PIN 2
C
2
MAX SWAY (TYP)
IN-PROCESS 4
.0787 2.00
(MEAS FROM
TIPS OF TAILS)
C
"R"
"G"
(SEE TABLE 3)
.020 0.50 SQ (TYP)
C
C
+.005
-.008
"S"
C
"F"
(SEE TABLE 3)
T-1S69-02-XX
(SEE TABLES 3 & 6)
QMS-026-01-D-02-RA-PC8
TERMINAL 3
T-1R37-XX-T
(SEE TABLE 2, SHEET 2)
(SEE TABLES 3 & 6)
TERMINAL 1
(SEE TABLES 3 & 6)
90°
"H" REF
(SEE TABLE 3)
TERMINAL 2
(SEE TABLES 3 & 6)
IN-PROCESS 5
"T" REF
"R" REF
TERMINAL
PIN 3
C
TERMINAL
PIN 1
TERMINAL
PIN 2
C
3 EQ. SPACES @
.0787 [2.00]=.236 6.00
(MEAS. FROM TIPS
OF TAILS)
PROPRIETARY NOTE
C
"R"
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
C
+.005
"U"
-.008
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
FIG 3
DWG. NO.
(QMS-052-XX-XX-D-RA-PC8 SHOWN)
(SAME AS FIG 2, DIFFERENT AS SHOWN)
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
BY:
KNOWLDEN 8/25/2006 SHEET 5 OF 6
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
PACKAGING VIEW
-TR: TAPE & REEL OPTION
(QMS-052-01-XX-D-RA-MG-TR SHOWN)
REVISION AA
T-1R37-XX-T
(SEE TABLE 2, SHEET 2)
C
L
ROUND HOLES
POSITION 1
.225 5.72 REF
"V" REF
(TABLE 7, SHT 5)
QMS-026-01-D-02-RA
.080 2.03 REF (TYP)
"C"
(SEE TABLE 2, SHT 2)
C
C
"A"
"W"
(SEE TABLE 2, SHT 2)
.062 1.57 REF
(TABLE 7, SHT 5)
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
C
FIG 4
(QMS-052-01-XX-D-RA SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
AVAILABLE AS ASO ONLY
-K: KAPTON PAD
QMS-026-01-XX-D-RA-MG-K SHOWN
(USE K-850-650)
(FOR 1 AND 3 BANKS ONLY)
-K: KAPTON PAD
QMS-052-01-XX-D-RA-MG-K SHOWN
(USE K-850-650)
C
"X" .02[0.5]
(SEE TABLE 4)
(FOR 2 AND 4 BANKS ONLY)
.005 0.13
.305 7.75
C
"X" .02[0.5]
(SEE TABLE 4)
.325 8.26
.305 7.75
.005 0.13
.018±.020 0.44±0.51
.217 5.50
.09±.02 2.2±0.51
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
.635mm DUAL ROW RIGHT ANGLE PLUG ASSEMBLY
DWG. NO.
QMS-XXX-XX-XX-D-RA-XX-XXX-XX
BY: KNOWLDEN
8/25/2006
SHEET 6 OF 6
F:\DWG\MISC\MKTG\QMS-XXX-XX-XX-D-RA-XX-XXX-XX-MKT.SLDDRW
相关型号：
QMS-026-02-S-D-RA-MG-K
Board Connector, 52 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal, Plug,
SAMTEC
QMS-026-02-SL-D-RA
Board Connector, 52 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, Plug,
SAMTEC
QMS-026-02-SL-D-RA-MG-K
Board Connector, 52 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal, Plug,
SAMTEC
QMS-026-05.75-L-D-A
Board Connector, 52 Contact(s), 2 Row(s), Male, Straight, 0.025 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC
QMS-026-05.75-L-D-A-K
Board Connector, 52 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
QMS-026-05.75-L-D-A-RT1
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.025 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle
SAMTEC
QMS-026-05.75-L-D-PC4
Board Stacking Connector, 60 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
QMS-026-05.75-L-D-RF1
Board Stacking Connector, 52 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
QMS-026-05.75-L-D-RF2
Board Stacking Connector, 56 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明