QSH-030-01-L-D-RA-K [SAMTEC]
Board Stacking Connector;
| 型号： | QSH-030-01-L-D-RA-K |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector 连接器 |
| 文件： | 总6页 (文件大小：897K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION B
QSH-XXX-XX-X-D-RA-XXX
C
OPTION
DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
-030, -060, -090
(PER ROW)
"A" REF
"C"
-GP: QUIDE POST
(SEE FIG. 3, SHT 6)
-LS1: LOCKING SCREW
(SEE FIG. 2, SHT 5)
*
(FOR MATING WITH
QTH-...-RA-..LS1)
LEAD STYLE
C
L
-01
-K: KAPTON PAD
(SEE NOTE 6)
(SEE FIG. 4, SHEET 6)
(USE K-DOT-256-375-005)
.535 13.59
REF
C
PLATING
SPECIFICATION
SEE SHEET 2, TABLE 4
.200 5.08
(END WT'S)
.207 5.25 REF
(CENTER WT'S - SEE NOTE 8)
ROW SPECIFICATION
-D: DOUBLE
-RA: RIGHT ANGLE
(USE QSH-30-01-D-XX-RA)
POSITION 1
INDICATOR
"D"
.450 11.43
REF.
(* = NOT TOOLED)
"B" REF
.8500±.0030 21.590±0.076
.7875 20.003
(SEE NOTE 8)
(TYP)
(SEE NOTE 8)
QSH-30-01-D-XX-RA
C
"A"
01
02
.333 8.47
REF.
.245 6.22 REF
.191 4.85 REF
.012 0.30 REF
C
L
2
MAX SWAY
(EITHER DIRECTION)
"A"
.1763 4.48
C
.025 0.64 SQ. REF
(TYP) (SEE NOTE 8)
7 EQ. SPCS @
.080[2.03] =
.560 14.22
"E" REF.
.1707±.0030 4.337±0.076
(BOTH ROWS)
.325 8.26 REF
C
.052 1.32 REF.
.052 1.32 REF.
FIG 1
QSH-090-01-X-D-RA SHOWN
.006 0.15 REF (TYP)
29 EQ. SPCS.
@ .0197 [0.500] =
.571 14.50
.043 1.10 REF.
.7875 20.00 (TYP)
(BOTH ROWS)
(BOTH ROWS)
C
C
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
NOTES:
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
1.
REPRESENTS A CRITICAL DIMENSION.
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
2. BURR ALLOWANCE: .0010 MAX.
3. MINIMUM PUSHOUT FORCE: 6 OZ.
.XXX: .005 [0.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [0.051]
e-Mail info@SAMTEC.com
4. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
5. IM-1G18-01-2-XX RETENTION TO BE 1.0 LBS. MINIMUM PRIOR TO SECOND ROW FILL.
6. DESIGNED FOR USE WITH A .062 OR .093 THICK PCB
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
INSULATOR: LCP UL94V-0, COLOR BLACK
DWG. NO.
7. ASSEMBLIES TO BE PACKAGED IN TRAYS.
TERMINAL, GROUND PLANE & WELD TAB: PHOS BRONZE
8. CENTER WELD TABS ARE NOT AVAILABLE ON -030 POSITION.
9. USE -Z- DATUM ZONE ONLY FOR MEASUREMENTS.
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 1 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
REVISION B
C-178-02-XXX
(SEE TABLE 4)
-C-
IM-1G18-01-2-XXX
(SEE TABLE 4)
.039 0.99 REF.
.113 2.87 REF.
C-177-01-XXX
(SEE TABLE 4)
-C-
C
C-177-01-XXX
(SEE TABLE 4)
.1700 4.318
SEE TOP ROW-TAIL DETAIL
.0040 0.102
C
WT-16-05-T
.0014 0.036
(BOTTOM ROW)
(MEAS BOTH ENDS)
(SEE NOTE 9)
C
.055 1.40
(SEE NOTE 9)
C
C
C
SEE TABLE 2
TOP ROW & BOTTOM ROW
.049 1.23
(SEE NOTE 9)
(LOCATE ASSY ON DATUM -C-
FOR MEASUREMENT)
BOTTOM ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
.207 5.25
.025 0.64 REF.
.071 1.79
(CTR WT'S ONLY)
(SEE NOTE 8)
C
.040 1.02 REF.
.010 0.25 REF.
SEE BOTTOM ROW-TAIL DETAIL
.025 0.64 REF.
.285 7.24
-C-
C-178-02-XXX
(SEE TABLE 4)
C
C
C
C
.354 8.99
.442 11.21
.0014 0.036
(BOTTOM ROW)
(MEAS BOTH ENDS)
(SEE NOTE 9)
.450 11.43
C
SECTION "A"-"A"
SCALE 6:1
TOP ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
1
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 2 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
INSPECTION VIEW 1
REVISION B
(FILL BOTTOM ROW)
Z2
Z1
-C-
C-177-01-XXX
(SEE TABLE 4)
-C-
QSH-30-01-D-XX-RA
.285 7.24
C
C-177-01-XXX
BOTTOM ROW
(SEE TABLE 4)
SEE TABLE 2
(WITHIN ROW)
'B'
'C'
.0014 0.036 REF
(BOTTOM ROW)
(SEE NOTE 9)
.285 7.24 REF
IN-PROCESS 1
(FILL BOTTOM ROW)
Z2
Z1
(SEE INSPECTION VIEW 1 FOR ORIENTATION AND CPC'S)
SEE TABLE 2
(WITHIN ROW)
.0014 0.036
(BOTTOM ROW)
(SEE NOTE 9)
-C-
.0014 0.036
(BOTTOM ROW)
(SEE NOTE 9)
IM-1G18-XX-2-XXX
(SEE TABLES 3 & 4)
C
DETAIL 'B'
SCALE 4 : 1
DETAIL 'C'
SCALE 4 : 1
C
.0040 0.102
REF
INSPECTION VIEW 2
(FILL IM-1M-1G18)
Z2
Z1
-C-
.354 8.99 REF
.049 1.23 REF
(SEE NOTE 9)
.354 8.99
C
IN-PROCESS 2
(FILL IM-1G18)
IM-1G18-01-2-XXX
(SEE TABLE 4)
(SEE INSPECTION VIEW 2 FOR ORIENTATION AND CPC'S)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
Z1
Z2
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
.049 1.23
(SEE NOTE 9)
C
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
.049 1.23
(SEE NOTE 9)
C
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 3 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
INSPECTION VIEW 3
REVISION B
(FILL TOP ROW)
-C-
'D'
C-178-02-XXX
SEE TABLE 2
(WITHIN ROW)
.0014 0.036 REF
(TOP ROW)
(SEE NOTE 9)
.442 11.21 REF
Z1
Z2
-C-
IN-PROCESS 3
(FILL TOP ROW)
(SEE INSPECTION VIEW 3 FOR ORIENTATION AND CPC'S)
.442 11.21
C
C-178-02-XXX
TOP ROW
(SEE SHEET 2, TABLE 4)
C
'E'
'F'
.0040 0.102
.1700 4.318
C
DETAIL 'D'
SCALE 4 : 1
Z1
Z2
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SEE TABLE 2
(WITHIN ROW)
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.0014 0.036
(TOP ROW)
(SEE NOTE 9)
C
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.0014 0.036
(TOP ROW)
(SEE NOTE 9)
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
C
DETAIL 'E'
SCALE 4 : 1
DETAIL 'F'
SCALE 4 : 1
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 4 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
REVISION B
.280 7.11 REF.
C
"H" REF.
"J" REF
QSH-30-01-D-XX-RA-LS1
.191 4.85 REF
.0625 1.588 REF
C
FIG 2
QSH-060-01-X-D-RA-LS1 SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(NOT TOOLED)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 5 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
C
REVISION B
"H" REF
.280 7.11 REF
"J" REF
QSH-30-01-D-XX-RA-GP
.191 4.85 REF.
.130 3.30
C
FIG 3
QSH-090-01-X-D-RA-GP SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
"H" REF.
.045±.020 1.14±0.51
C
.256 6.50 REF.
(USE K-DOT-256-375-005)
C
"K"±.020[0.51]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 4
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
QSH-090-01-X-D-RA-GP-K SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.50mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSH-XXX-XX-X-D-RA-XXX
BY:
DUKES Z
01/31/2010 SHEET 6 OF 6
F:\DWG\SW\Exisprod\Assembly\Point5mm\QSH-XXX-XX-X-D-RA-XXX-ASM.slddrw
相关型号：
QSH-030-02-L-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
QSH-030-03-C-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
QSH-030-03-L-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
QSH-030-04-L-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
QSH-030-05-F-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
QSH-030-07-C-D-A
Board Stacking Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明