QSS-075-02-L-D-RA-WT-MTI [SAMTEC]
Board Connector;
| 型号： | QSS-075-02-L-D-RA-WT-MTI |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector |
| 文件： | 总6页 (文件大小：1247K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AM
QSS-XXX-XX-XXX-D-RA-XX-XXX
No OF POSITIONS
OPTION
DO NOT
SCALE FROM
THIS PRINT
-025, -050, -075, *-100
(PER ROW)
-LS1: LOCKING SCREW
(SEE FIG. 2, SHT 4)
(FOR MATING WITH
QTS-...-RA-..LS1)
-MTI: THREADED INSERT
(SEE FIG. 5, SHT 6)
-SP: SOLDER PIN
(NOT AVAILABLE
W/LS1 OPTION)
(USE SP-19-T)
C
"A"
C1-A-DC
(SEE NOTE 4)
*(SEE NOTE 12)
"B" REF
LEAD STYLE
-01: .062 BOARD
-02: .093 BOARD
.250 6.35 REF (TYP)
.250 6.35 MAX REF (TYP)
(SEE FIG. 3, SHT 5)
-K: KAPTON PAD
(SEE FIG. 4, SHT 5)
(USE K-500-300)
.006 0.15 REF
PLATING SPECIFICATION
SEE TABLE 8, SHEET 6
.560 14.22
REF
-WT: WELD TAB
ROW SPECIFICATION
-D: DOUBLE
(SEE NOTE 4)
(USE WT-16-XX-T)
(USE QSS-25-01-D-XX-RA)
.1240 3.15 INSCRIBED
REF (TYP)
CONNECTOR TO
PCB MOUNTING
POINT (2 PLCS)
(SEE NOTE 10)
-RA: RIGHT ANGLE
.280 7.11 REF
C
C
L
24 EQ SPACES
@ .0250[.635] =
.600 15.24
L
C
C2-F-MV
.096 2.44 REF
.069 1.75 REF
.7838 19.91 REF
QSS-25-01-D-XX-RA
C
01
L
.245 6.22
REF
.186 4.71 REF
"E" REF
(SEE TABLE 2)
.125 3.18 REF
02
.025 0.64 SQ
REF (TYP)
(SEE NOTE 4)
.328 8.33 REF
.012 0.30 REF
C15-A-MV
C
.114±.003 2.89±0.08
(TYP) (SEE NOTE 4)
7 EQ SPACES @ .080[2.03] =
.560 14.22
"C" REF
"D" REF
C
C3-F-MV
FIG 1
NOTES:
QSS-075-01-XXX-D-RA-WT SHOWN
(SOME CENTER DETAILS REMOVED FOR CLARITY)
CX-X-XX
1.
REPRESENTS A CRITICAL DIMENSION.
* = SEE NOTE 12
2. BURR ALLOWANCE: .0010 MAX.
3. MINIMUM PUSHOUT FORCE: 6 OZ.
CPC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
4. WELD TABS (WT-16-XX-T) NOT AVAILABLE ON -025 POSITION.
WT OPTION MUST BE SELECTED FOR -050, -075 & -100 POSITIONS.
5. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
6. IM-1G18-XX-1-XX RETENTION TO BE 1.0 LBS. MINIMUM PRIOR
TO SECOND ROW FILL.
FREQUENCY
THIS SHEET
DECIMALS
ANGLES
2
A
C1, C15
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
7. DESIGNED FOR USE WITH A .062 OR .093 THICK PCB
8. ASSEMBLIES TO BE PACKAGED IN TRAYS.
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
B
C
D
SHEET SCALE: 1.5:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
9. NOTE DELETED
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
10. TORQUE TO BE 10.0 IN-OZ USING 4-40 UNC SCREW.
11. USE -Z- DATUM ZONE ONLY FOR MEASUREMENTS.
12. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
INSULATOR: LCP, COLOR: BLACK
DWG. NO.
TERMINAL, GROUND PLANE &
WELD TAB: PHOS BRONZE
QSS-XXX-XX-XXX-D-RA-XX-XXX
SHEET 1 OF 6
BY:
KEVIN B
01/22/02
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
REVISION AM
-C-
* = SEE NOTE 12
.113 2.87
REF
C-178-02-XXX
(SEE TABLE 8, SHEET 6)
"F"
IM-1G18-XX-1-XXX
(SEE TABLE 4 & TABLE 8, SHEET 6)
.1680±.0030 4.267±0.076
C4-B-MV
C-177-01-XXX
(SEE TABLE 8, SHEET 6)
C-177-01-XXX
(SEE TABLE 8, SHEET 6)
-C-
SEE TOP ROW-TAIL DETAIL
.0040 0.102
C8-B-MV
C5-F-MV
.004±.002 0.10±0.05
(BOTTOM ROW)
(MEAS BOTH ENDS)
(SEE NOTE 11)
C13-F-OG
SEE TABLE 3
C6-B-MV
TOP ROW & BOTTOM ROW
"F"
(SEE NOTE 4 & 11)
(LOCATE ASSY ON DATUM -C-
FOR MEASUREMENT)
BOTTOM ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
"G"
(SEE NOTE 11)
C12-B-MV
SEE BOTTOM ROW-TAIL DETAIL
.148 3.75
(SEE NOTE 4)
C21-B-MV
.207 5.25
(SEE NOTE 4)
REF
WT-16-XX-T
(SEE NOTE 4 )
(SEE TABLE 4)
.040 1.02 REF
.010 0.25 REF
.025 0.64
REF
REF
C7-B-MV
.285 7.24
-C-
C17-B,I-MV
C9-B-MV
.354 8.99
REF
.004±.002 0.10±0.05
(TOP ROW)
(MEAS BOTH ENDS)
(SEE NOTE 11)
C-178-02-XXX
(SEE TABLE 8, SHEET 6)
.442 11.21 REF
C11-B-MV
30° TYP REF
TOP ROW - TAIL DETAIL
(LOCATE ASSEMBLY ON
DATUM -C- FOR MEASUREMENT)
.018 0.457
REF
CPC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FREQUENCY
THIS SHEET
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
A
520 PARK EAST BLVD, NEW ALBANY, IN 47150
C4, C6, C7,
C8, C9,
C11, C12,
C17, C21
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
B
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
C
D
DETAIL "F"
SCALE 10 : 1
QSS-XXX-XX-XXX-D-RA-XX-XXX
SHEET 2 OF 6
BY:
KEVIN B
01/22/02
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
-C-
REVISION AM
.046 1.17 REF
INSPECTION VIEW 1
(FILL BOTTOM ROW)
C-177-01-XXX
(SEE TABLE 8, SHEET 6)
Zx
Z1
.046 1.17
REF
Z2
-C-
QSS-25-01-D-XX-RA
C-177-01-XXX
(SEE TABLE 8, SHEET 6)
.285 7.24 (TYP)
C7-B-MV
ISO VIEW OF
-Z- DATUM ZONE
SEE TABLE 3, SHT 2
WITHIN ROW
'G'
'H'
C10-REF
.285 7.24 REF
.004 0.10 REF
(BOTTOM ROW)
(SEE NOTE 11)
C8-REF
C7-REF
IN-PROCESS 1
(FILL BOTTOM ROW)
.004±.002 0.10±0.05
(BOTTOM ROW)
(SEE NOTE 11)
Z2
(SEE INSPECTION VIEW 1 FOR ORIENTATION AND CPC'S)
Z1
SEE TABLE 3, SHT 2
WITHIN ROW
C8-B-MV
C10-B,I-MV
-C-
.004±.002 0.10±0.05
(BOTTOM ROW)
(SEE NOTE 11)
C8-B-MV
IM-1G18-XX-1-XXX
(SEE TABLE 4, SHEET 2
& TABLE 8, SHEET 6)
DETAIL 'G'
SCALE 6 : 1
DETAIL 'H'
SCALE 6 : 1
"G" REF
(SEE NOTE 11)
INSPECTION VIEW 2
(FILL IM-1G18)
(SEE TABLE 4, SHEET 2)
C12-REF
Z2
C17-REF
Z1
.046 1.17 REF
.354 8.99 REF
-C-
.424 10.77 REF
.354 8.99
IM-1G18-XX-1-XXX
(SEE TABLE 4, SHEET 2
& TABLE 8, SHEET 6)
IN-PROCESS 2
C17-B-MV
(FILL IM-1G18)
(SEE INSPECTION VIEW 2 FOR ORIENTATION AND CPC'S)
CPC
PROPRIETARY NOTE
Z1
Z2
FREQUENCY
THIS SHEET
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
"G"
"G"
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(SEE TABLE 4, SHEET 2)
(SEE NOTE 11)
C12-B-MV
(SEE TABLE 4, SHEET 2)
(SEE NOTE 11)
A
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
C7, C8,
C10, C12,
C17
C12-B-MV
C
B
C
D
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSS-XXX-XX-XXX-D-RA-XX-XXX
BY:
KEVIN B
01/22/02
SHEET 3 OF 6
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
REVISION AM
INSPECTION VIEW 3
(FILL TOP ROW)
'J'
"E" REF (SEE TABLE 2, SHEET 1)
Z2
Z1
.046 1.17 REF
-C-
.442 11.21
C9-B-MV
C22-B-CP
"H" REF
FIG 2
C-178-02-XXX
(SEE TABLE 8, SHEET 6)
QSS-075-01-XXX-D-RA-WT-LS1 SHOWN
'L'
'K'
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER DETAILS REMOVED FOR CLARITY)
* = SEE NOTE 12
C-178-02-XXX
(SEE TABLE 8, SHEET 6)
.1680 4.267
REF (TYP)
C4-REF
.1700 4.318
C4-B-MV
C
SEE TABLE 3, SHT 2
WITHIN ROW
C24-REF
.442 11.21 REF
C11-B-MV
.004 0.10 REF
(TOP ROW)
(SEE NOTE 11)
DETAIL 'J'
SCALE 6 : 1
C18-REF
.004±.002 0.10±0.05
(TOP ROW)
(SEE NOTE 11)
C11-REF
IN-PROCESS 3
Z1
Z2
(FILL TOP ROW)
C24-B,I-MV
(SEE INSPECTION VIEW 3 FOR ORIENTATION AND CPC'S)
SEE TABLE 3, SHT 2
CPC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
WITHIN ROW
FREQUENCY
THIS SHEET
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
A
.004±.002 0.10±0.05
TOP ROW
(SEE NOTE 11)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
C4, C9,
C10, C11,
C22, C24
B
C
D
DESCRIPTION:
C11-B-MV
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DETAIL 'K'
SCALE 6 : 1
DETAIL 'L'
SCALE 6 : 1
DWG. NO.
QSS-XXX-XX-XXX-D-RA-XX-XXX
SHEET 4 OF 6
BY:
KEVIN B
01/22/02
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
FIG 3
REVISION AM
QSS-075-01-XXX-D-RA-WT-SP SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(NOT AVAILABLE WITH LS1 OPTION)
(SOME CENTER DETAILS REMOVED FOR CLARITY)
QSS-25-01-D-XX-RA-SP
.055 1.40
C19-B-MV
.081 2.06 REF
SP-19-T
.035 0.89 REF
C
C23-B-MV
"B"
(SEE TABLE 1, SHEET 1)
FIG 4
-K OPTION
QSS-075-01-XXX-D-RA-WT-K SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER DETAILS REMOVED FOR CLARITY)
.250 6.35 REF
.065±.010 1.65±0.25
.333 8.46 REF
"J"±.020 [0.51]
.790 20.07 REF
C16-B-MV
CPC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FREQUENCY
THIS SHEET
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
A
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
C16, C19,
C23
B
C
D
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSS-XXX-XX-XXX-D-RA-XX-XXX
* = SEE NOTE 12
SHEET 5 OF 6
BY:
KEVIN B
01/22/02
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
REVISION AM
FIG 5
QSS-075-01-XXX-D-RA-WT-MTI SHOWN
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER DETAILS REMOVED FOR CLARITY)
* = SEE NOTE 12
.274 6.96
REF
#4-40 THREAD REF
C20-B-CP
"K" REF
C1-A-DC
"L" REF
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE
ASSEMBLY OPERATION
IN-PROCESS INSPECTION
FILL C-177-XX-XXX
FILL IM-1G18-XX-1-XXX
C1, C7, C8, C10
C12, C17
FILL C-178-XX-XXX
FILL WT-16-XX-XX
C4, C5, C11, C24
C6, C21
-LS1
-MTI
-SP
-K
C1, C22
C1, C20
C1, C19, C23
C1, C16
CPC
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FREQUENCY
THIS SHEET
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
A
C1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
B
C
D
C20
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP
DWG. NO.
QSS-XXX-XX-XXX-D-RA-XX-XXX
SHEET 6 OF 6
BY:
KEVIN B
01/22/02
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW
相关型号：
QSS-080-01-F-01-K
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-01-LC
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-01-LS2
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-02-K
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-02-LC
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-02-LS2
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket
SAMTEC
QSS-080-01-F-03-A
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-03-LC
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-04-A
Board Connector, 160 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
QSS-080-01-F-D-DP-EM3
Board Connector, 160 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket
SAMTEC
©2020 ICPDF网 联系我们和版权申明