QTE-014-05-STL-D-DP [SAMTEC]
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | QTE-014-05-STL-D-DP |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, |
| 文件： | 总5页 (文件大小：706K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
X
= ASO ONLY (APPLICATION SPECIFIC
ORDER)
REVISION AG
QTE-XXX-XX-XXX-D-DP-XXX
No OF POSITIONS
OPTION
-A: ALIGNMENT PINS
-LC: LOCKING CLIPS(SEE NOTE 13)
(USE LC-08-TM-01)
-014, -028, -042,
*-056,*-070
-K: POLYIMIDE FILM
(PER ROW)
(*SEE NOTE 12)
(USE K-DOT-.276-.375-.005)
(SEE FIG. 2, SHT. 2)
C1
(N/A ON STYLES -07 & -08)
LEAD STYLE
-GP: GUIDE POSTS
-01: .1680 [4.267] (SEE FIG.1)
-02: .2861 [7.264] (SEE FIG.1)
-03: .4042 [1.123] (SEE FIG.1)
-04: .600[15.24]
(AVAILABLE ON -01 ONLY)
(No OF POSITIONS / 14) x .7875[20.003]
(USE QTE-20-01-D-XX-X-GP)
(SEE FIG. 3, SHT. 2)
.095 2.40 REF
X
X
X
-TR: TAPE & REEL (42 POS. MAX)
(NOT AVAILABLE ON -05, -06,
-07, -08 LEAD STYLES)
(SEE FIG. 4, SHT. 3)
.788 20.00 REF
-05: .718[18.237]
.032 0.80 REF
01
(SEE FIG. 4, SHT. 3)
(028 POS MAX FOR -GP OPTION)
-RT1: RETENTION OPTION (SEE FIG. 7, SHEET 4)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
-06: .835[21.209]
(SEE FIG. 4, SHT. 3)
X
X
-07: .954[24.232]
X -08: 1.151[29.24]
-09: .522[13.258]
(USE QTE-20-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, -SD, OR -FL)
(NOT AVAILABLE ON -056 & -070 POS)
AG -L: LATCHING OPTION (28 POS. MAX.)
(SEE FIG. 8, SHEET 5) (MUST USE -A OPTION)
(AVAILABLE ON -01 ONLY)
DO NOT
SCALE FROM
THIS PRINT
.155 3.94 REF
02
.235 5.97 REF
X -10: .5606[14.239]
PLATING SPECIFICATION
-F: FLASH SELECTIVE GOLD WITH MATTE TIN TAILS
.008 0.20 REF
.033 0.84
REF
.632 16.05
(USE T-1SXX-XX-F, T-1G1-XX-F)
(NOT AVAILABLE WITH -LC, -GP, -SD, -FL,
OR -RT1)
-L: LIGHT SELECTIVE GOLD WITH MATTE TIN TAILS
(USE T-1SXX-XX-L, T-1G1-XX-L)
6 SPACES
-H: HEAVY GOLD WITH FLASH GOLD TAILS
(USE T-1SXX-XX-H, T-1G1-XX-G)
@ .0945[2.40]
BODY STYLE
-DP: DIFFERENTIAL PAIRS
ROW SPECIFICATION
-D: DOUBLE (USE QTE-20-XX-D-XX &
QTEH-20-XX-D-XX)
-C: ELECTRO-POLISHED SELECTIVE
(USE T-1SXX-XX-C, T-1G1-XX-L)
-STL: HEAVY SELECTIVE GOLD WITH TIN LEAD TAILS
(USE T-1SXX-XX-STL, T-1G1-XX-STL)
-FTL: FLASH SELECTIVE GOLD WITH TIN LEAD TAILS
(USE T-1SXX-XX-FTL, T-1G1-XX-FTL)
QTE-20-01-D-XX
T-1G1-01-XXX
C2
No OF BANKS
.003[.08]
.002[.05]
'A'
"A"
T-1SXX-XX-XXX
(SEE TABLE 1)
"A"
"A"
"B" REF
(SEE NOTE 5, 6 & 10)
.006 0.15
C3
REF
.055 1.40
SEE TABLE 2
.023 0.57 REF
.015 0.38 REF
.056 1.42 REF
.280 7.112 REF
LC-08-01-T
.010 0.25 REF
.745 18.92 REF
(((No OF POSITIONS / 14) x .7875[20.003])
-.060[1.52]) .003[.08]
FIG. 1
DETAIL 'A'
SCALE 6 : 1
SECTION "A"-"A"
QTE-042-01-XXX-D-DP-LC SHOWN
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
-LC: LOCKING CLIP OPTION SHOWN
QTE-20-01-D-XX-A
2. MINIMUM TERMINAL RETENTION: 5 OZ.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [.05].
6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.
7. DELETED.
.036 0.91
REF
8. DELETED.
R
9. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
(((No OF POSITIONS / 14) x .7875[20.003]) - .060[1.52]) REF
.038 0.95 REF
10. GROUND PLANE PRESS HEIGHT MUST BE .003[.08] LESS THAN THE MAX HEIGHT
OR .001[.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
11. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
-A: ALIGNMENT PIN OPTION SHOWN
12. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
(STYLES -01, -02 & -03)
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
.XXX: .005[.13]
.XXXX: .0020[.051]
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
INSULATOR: LCP, BLACK
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
DEAN P
4/28/2000
SHEET 1 OF 5
BY:
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
REVISION AG
FIG. 2
NOTE: "R" = (No OF POSITIONS / 14) x .7875[20.003]
"S" = (("R" - .276[7.01]) / 2) .020[.51]
-K: POLYIMIDE FILM PAD
[USE K-DOT-.276-.375-.005]
"R" REF
"C"
"S"
.021 0.521
.276 7.01
FIG. 3
-GP: GUIDE POST OPTION
(-01 LEAD STYLE ONLY)
(SAME AS FIG. 1, UNLESS OTHERWISED STATED)
.363 9.22
.300 7.62
((No OF POSITIONS / 14) x .7875[20.003]) + .5175[13.145] REF
((No OF POSITIONS / 14) x .7875[20.003]) + .225[5.72] REF
C
L
.125 3.18 REF
QTE-20-01-D-XX-X-GP
QTE-20-03-D-XX-A
(-LC BODY MAY BE USED TO SUBSTITUTE)
QTEH-20-XX-D-XX-A
.038 0.95
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.035 0.89 REF
((No OF POSITIONS / 14) x .7875[20.003]) - .060 [1.52] REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.053 1.33
REF
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
-A: ALIGNMENT PIN OPTION
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
(STYLES -04, -05, -06, -07, -08, -09, -10)
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
BY:
DEAN P
4/28/2000
SHEET 2 OF 5
REVISION AG
01
02
QTE-20-03-D-XX-A
(-LC BODY MAY BE USED TO SUBSTITUTE)
"B"
T-1S41-XX-XXX
C5
.003[.08]
.001[.03]
(SEE TABLE 4)
(SEE NOTE 5)
.396 10.06 REF
"D"
FIG. 4
QTE-042-04-X-D-DP-LC SHOWN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(STYLES -04, -05, & -06)
SEE TABLE 2
.056 1.42 REF
"B"
.055 1.40
QTEH-20-XX-D-XX
.281 7.14 REF
T-1G1-XX-X
.010 0.25 REF
SECTION "B"-"B"
-LC: LOCKING CLIP OPTION SHOWN
T-1S60-XX-XXX
QTE-20-02-D-XX-A
"D"
"D"
.003[.08]
"D"
.265 6.73
REF
.001[.03]
(SEE TABLE 4)
(SEE NOTES
6 & 10)
QTEH-20-01-D-XX-A
T-1G1-XX-XXX
FIG. 6
SECTION "D"-"D"
SCALE 1.25 : 1
T-1S61-XX-XXX
QTE-042-09-X-D-DP-A SHOWN
QTE-20-02-D-XX-A
"C"
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 4]
(STYLES -09 & -10)
.003[.08]
.001[.03]
"D"
(SEE TABLE 4)
(SEE NOTES
6 & 10)
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
"C"
520 PARK EAST BLVD, NEW ALBANY, IN 47150
QTEH-20-04-D-XX-A
T-1G17-XX-XXX
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
SECTION "C"-"C"
SCALE 1.25 : 1
DESCRIPTION:
FIG. 5
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
QTE-042-07-X-D-DP-A SHOWN
NO.
DQWG.TE-XXX-XX-XXX-D-DP-XXX
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 4]
(STYLES -07 & -08)
SHEET 3 OF 5
BY:
DEAN P
4/28/2000
REVISION AG
FIG. 7
-RT1: RETENTION OPTION
(ONLY AVAILABLE ON -01 LEAD STYLE)(MUST USE -A OPTION)
(NOT AVAILABLE WITH -LC, -GP, -SD, OR -FL OPTIONS)
(NOT AVAILABLE ON -056 & -070 POSITIONS)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
((No OF BANKS) x .7875[20.003]) + .650[16.51] REF
QTE-20-01-D-XX-A-RT1
C6
(((No OF BANKS) x .7875[20.003]) + .341[8.66]) .004[0.10]
.069 1.76
REF
'F'
.062 1.57
REF
T-1R36-01-F (2X)
C7
.190 4.83
(SEE NOTE 11)
.100 2.54 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.070 1.78 REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.4
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
DWG. NO.
DETAIL 'F'
SCALE 5 : 1
QTE-XXX-XX-XXX-D-DP-XXX
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
BY:
DEAN P
4/28/2000
SHEET 4 OF 5
REVISION AG
AG
FIG. 8
-L: LATCHING OPTION
(28 POS. MAX.)
(MUST USE -A OPTION)
(AVAILABLE ON -01 LEAD SYTLE ONLY)
(NOT AVAILABLE WITH -LC, -GP, -SD, -FL, OR -RT1)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(No OF POS / 14) x .7875 [20.003] + .1180[2.997] REF 43.00
C8
(No OF POS / 14) x .7875 [20.00] +.1310[3.327] 43.17
QTE-20-01-D-XX-A-L
C10
.053±.002 1.35±0.051
.025 0.64
REF
WT-56-01-T
.010 0.25 REF
(No OF POS / 14) x .7875 [20.00] +.0665 [1.689] 41.62
C9
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.4
.8mm DIFFERENTIAL PAIRS HS TERMINAL ASSEMBLY
DWG. NO.
QTE-XXX-XX-XXX-D-DP-XXX
F:\DWG\MISC\MKTG\QTE-XXX-XX-XXX-D-DP-XXX-MKT.SLDDRW
BY:
DEAN P
4/28/2000
SHEET 5 OF 5
相关型号：
QTE-014-06-C-D-DP
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTE-014-06-FTL-D-DP
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTE-014-06-STL-D-DP
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTE-014-07-L-D-DP-A
Board Stacking Connector, 28 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Receptacle
SAMTEC
QTE-014-08-FTL-D-DP
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTE-014-09-FTL-D-DP
Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明