QTH-040-01-H-D-DP-A-L [SAMTEC]
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | QTH-040-01-H-D-DP-A-L |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, |
| 文件： | 总5页 (文件大小：1018K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AG
QTH-XXX-XX-X-D-DP-XXX
OPTION
No OF POSITIONS
-020, -040, -060, ***-080, ***-100
(PER ROW)
-A: ALIGNMENT PINS
DO NOT
SCALE FROM
THIS PRINT
(SEE FIGS 1 & 3, SHT 2)
-LC: LOCKING CLIPS
***SEE NOTE 11
(USE LC-08-TM-01, SEE FIG 2) (SEE NOTE 12)
-K: POLYIMIDE FILM (USE K-500-300)
(AVAILABLE ON -01 THRU -04 &
-09 AND -10 ONLY)(SEE FIG 4, SHT 2)
-TR: TAPE & REEL (60 POS MAX)
(40 POS MAX FOR -GP OPTION)
(N/A ON -05 THRU -08)
LEAD STYLE
-01: .1680[4.267]
*-02: .2861[7.264]
*-03: .4042[10.267]
*-04: .6001[15.243]
*-05: .7181[18.240]
*-06: .8361[21.237]
*-07: .9542[24.237]
*-08: 1.1511[29.238]
*-09: .5224[13.269]
*-10: .5618[14.270]
-GP: GUIDE POSTS OPTION
**
(AVAILABLE ON -01 & **-02 ONLY)
(USE QTH-30-XX-D-XX-GP)
(SEE FIG 8, SHT 4)
C
-RT1: RETENTION OPTION (SEE FIG 9, SHT 4)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
(USE QTH-30-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC OR -GP)
(NOT AVAILABLE ON -080 & -100 POS)
-L: LATCHING OPTION (SEE FIG 10, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(USE QTH-30-01-D-XX-L)
"D" REF
PLATING SPECIFICATION
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
.7875 20.003 REF
(USE T-1GXX-XX-F) (SEE NOTE 7)
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
9 EQ. SPCS
@ .059[1.50]
=.532 13.50 (TYP)
.020 0.50 REF
.059 1.50 REF
(USE T-1GXX-XX-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(40 POS MAX)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL (USE T-1GXX-XX-G)
-C: 50µ" ELECTRO-POLISHED SELECTIVE
IN CONTACT AREA, MATTE TIN ON
01
-FL: FRICTION LOCKS (SEE FIG 11, SHT 5)
(NOT AVAILABLE WITH -GP)
TAIL (USE T-1GXX-XX-L)
.155 3.94 REF
(SEE NOTE 13)
.235 5.97
REF
DIFFERENTIAL PAIRS
* = RELEASED FOR ASO ONLY
(APPLICATION SPECIFIC ORDER)
** = -02 LEAD STYLE NOT RELEASED
FOR PRODUCTION
ROW SPECIFICATION
-D: DOUBLE (USE QTH-30-01-D-XX)
02
No OF BANKS
.644 16.36 REF
.008 0.20 REF
.047 1.19 REF
C
QTH-30-XX-D-XX-A
T-1SXX-XX-X (SEE TABLE 1)
.098 2.49 REF
"A"
"A"
.155±.003 3.94±0.08
(SEE NOTE 13)
"B" REF
SEE NOTE 10
.003[.08]
.002[.05]
(SEE NOTE 5 & 8)
C
"A"
C
.745 18.92 REF
"E" REF
T-1G1-XX-X
SEE TABLE 2
(SEE NOTE 8)
.038 0.95 REF
.280 7.11
.035 0.89
REF
.031 0.79 REF
.015 0.38 REF
.0375 0.953
REF
SECTION "A"-"A"
NOTES:
FIG 1
C
1.
REPRESENTS A CRITICAL DIMENSION.
-A: ALIGNMENT PIN OPTION
(QTH-060-01-X-D-A SHOWN)
(FOR -01 & -02 LEAD STYLE ONLY)
2. MINIMUM PUSHOUT FORCE: 6 OZ FOR –01 & -02, 8 OZ FOR –03 THRU –09.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002[0.05]. APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. LEAD STYLES -03 THRU -08: TOP BODY (QTH) CANNOT HAVE -A OPTION.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
-G PLATED GROUND PLANE CAN BE SUSTITUTED FOR –F PLATED GROUND PLANE.
8. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.08] LESS THAN THE MAXIMUM
HEIGHT OR .002[0.05] GREATER THAN THE MINIMUM HEIGHT OF SIGNAL PIN.
9. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
TOLERANCES ARE:
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
10. CUT OFF BURR NOT TO EXCEED .003[0.08] IN ANY DIRECTION, BURR PLUS
TAB HEIGHT NOT TO EXCEED .006[0.15].
SHEET SCALE: 1.75:1
DO NOT SCALE DRAWING
MATERIAL:
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
13. PIN CAN EXTEND PAST WALL .003[0.08] MAX.
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
INSULATOR: LCP UL94V-0, COLOR: BLACK
TERMINAL & GROUND PLANE: PHOS BRONZE
DWG.
QNTOH. -XXX-XX-X-D-DP-XXX
SHEET 1 OF
5
BY: KEVIN B
09-14-2010
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
QTH-30-XX-D-XX
.0800 2.032
C
REVISION AG
.055 1.40
LC-08-TM-01
.056 1.42 REF
.010 0.25 REF
"E" REF
(SEE TABLE 3, SHT 1)
FIG 2
-LC: LOCKING CLIP OPTION
(QTH-060-01-X-D-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
QTH-30-02-D-XX (SEE NOTE 6)
.038 0.95
REF
.035 0.89 REF
QTHH-30-XX-D-XX-A
.080 2.03 REF
"E" REF
(SEE TABLE 3, SHT 1)
FIG 3
-A: ALIGNMENT PIN OPTION
(QTH-060-05-X-D-DP-A SHOWN)
(FOR -03 THRU -08 LEAD STYLE ONLY)
(SEE TABLE 4, SHT 3)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" REF
.020±.010 0.51±0.25
C
"S"±.020[0.51]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
C
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.75:1
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
DWG. NO.
.276 7.01
FIG 4
"T"
-K: POLYIMIDE FILM PAD OPTION
(USE K-500-300)
QTH-XXX-XX-X-D-DP-XXX
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
BY: KEVIN B
09-14-2010
SHEET 2 OF
5
REVISION AG
.006 0.15 MAX
BURR + TAB HEIGHT
.003 0.08 MAX
TAB HEIGHT
TAB
DETAIL 'E'
SEE NOTE 10
C
"B"
.155±.003 3.94±0.08
(SEE NOTE 13)
QTH-30-02-D-XX (SEE NOTE 6)
T-1S60-XX-X
C
+.003[.08]
-.001[.03]
.278 7.07 REF
"C"
'E'
(SEE NOTES 5 & 8)
C
.118 3.00 REF
SEE TABLE 2
(SEE NOTE 8)
"B"
.056 1.42 REF
.281 7.14
T-1G1-XX-X
QTHH-30-01-D-XX
SEE NOTE 10
.037 0.94 REF
.265 6.73 REF
SECTION "B"-"B"
FIG 5
QTH-060-03-X-D-DP-LC SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
.155±.003 3.94±0.08
T-1S61-XX-X
C
.155±.003 3.94±0.08
(SEE NOTE 13)
"D"
T-1S60-XX-X
"C"
C
C
"C" +.003[.08]
(SEE NOTES 5 & 8)
"C" +.003[.08]
(SEE NOTES 5 & 8)
-.001[.03]
-.001[.03]
C
C
SEE TABLE 2
SEE TABLE 2
(SEE NOTE 8)
"C"
QTHH-30-03-D-XX
(SEE NOTE 8)
.432 10.97
REF
SEE NOTE 10
T-1G17-XX-X
"D"
QTHH-030-04-D-XX
.600 15.24
SEE NOTE 10
T-1G17-XX-X
FIG 6
REF
FIG 7
SECTION "C"-"C"
SCALE 1.25 : 1
QTH-060-05-X-D-DP SHOWN
QTH-060-07-X-D-DP SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
SECTION "D"-"D"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.75:1
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
DWG. NO.
QTH-XXX-XX-X-D-DP-XXX
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
SHEET 3 OF
5
BY: KEVIN B
09-14-2010
REVISION AG
C
"G" REF
"H" REF
C
L
"F" REF
C
L
.295 7.49
SEE TABLE 5
.125 3.18 REF
FIG 8
-GP: GUIDE POST OPTION
(QTH-060-01-X-D-DP-GP SHOWN)
(FOR -01 & -02 LEAD STYLE ONLY)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(* = NOT ENGINEERING APPROVED)
"J" REF
C
L
QTH-30-01-D-XX-A-RT1
"K"
.069 1.76 REF
C
'G'
.062 1.57 REF
FIG 9
-RT1: RETENTION OPTION
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
(QTH-060-01-X-D-DP-A-RT1 SHOWN)
(FOR -01 LEAD STYLE ONLY)
(NOT AVAILABLE WITH -LC OR -GP OPTIONS)
(NOT AVAILABLE ON -080 & -100 POS)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
.190 4.83
(SEE NOTE 9)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.100 2.54 REF
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
T-1R36-01-F (2 PLCS)
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
DWG. NO.
DETAIL 'G'
SCALE 3 : 1
.070 1.78 REF
QTH-XXX-XX-X-D-DP-XXX
SHEET 4 OF
5
BY: KEVIN B
09-14-2010
REVISION AG
"L" REF
FIG 10
-L: LATCHING OPTION
(QTH-040-01-X-DP-L SHOWN)
(AVAILABLE ON -01 LEAD STYLE ONLY)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1 OPTIONS)
(40 POS MAX)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
"M"
.020 0.50
REF
QTH-30-01-D-XX-L
WT-56-01-T
.010 0.25
REF (TYP)
.025 0.64 REF
.053±.002 1.35±0.05
"N"
C
.008 0.20 REF
.015 0.38 REF
.012 0.30 REF
.015 0.38 REF
.070 1.78 REF (TYP)
QTH-30-XX-D-XX-X-FL
DETAIL 'J'
SCALE 12 : 1
DETAIL 'H'
SCALE 12 : 1
'J'
'H'
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
FIG 11
code 55322
-FL: FRICTION LOCKS
(NOT AVAILABLE WITH -GP OPTION)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.5mm DIFFERENTIAL PAIRS TERMINAL ASSEMBLY
DWG. NO.
QTH-XXX-XX-X-D-DP-XXX
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
BY: KEVIN B
09-14-2010
SHEET 5 OF
5
相关型号：
QTH-040-01-H-D-DP-EM3
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
QTH-040-01-L-D-DP-A
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Latch, Receptacle, ROHS COMPLIANT
SAMTEC
QTH-040-01-L-D-DP-A-K
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
QTH-040-01-L-D-DP-A-K-TR
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
QTH-040-01-L-D-DP-A-L-K
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTH-040-01-L-D-DP-A-RT1
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTH-040-01-L-D-DP-K-TR
Board Stacking Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明