QTS-016-01-F-D-DP-RA-WT-LS2 [SAMTEC]
Board Connector, 32 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,;
| 型号： | QTS-016-01-F-D-DP-RA-WT-LS2 |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 32 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, |
| 文件： | 总4页 (文件大小：574K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QTS-XXX-01-X-D-DP-RA-WT-XXX
REVISION AE
OPTION
No OF POSITIONS
-016, -032, -048, -064
-LS1: LOCKING SCREW (SEE NOTE 10)
(FOR MATING WITH QSS...-RA...-LS1)
(USE WITH SP-18-01-TM SOLDER PIN)
(SEE FIG. 2, SHT 3)
DO NOT
SCALE FROM
THIS PRINT
[PER ROW]
C
-LS2: LOCKING SCREW (SEE NOTE 10)
(FOR MATING WITH QSS...-LS2)
(SEE FIG. 3, SHT 3)
LEAD STYLE
((No OF POS / 16) x .7875[20.003]) + .580[14.73]
-01
(USE WITH SP-18-01-TM SOLDER PIN)
((No OF POS / 16) x .7875[20.003]) + .330[8.38] REF
-P: PICK AND PLACE PAD
(USE PPP-63) SEE FIG. 5, SHT 4)
.250 6.35 REF (TYP)
.250 6.35 MAX REF (TYP)
-WT: WELD TAB
.124 3.15
REF (TYP)
SEE NOTE 4; USE WT-16-01-T
-RA: RIGHT ANGLE
.280 7.11
REF
DIFFERENTIAL PAIR
ROW SPECIFICATION
-D: DOUBLE (USE QTS-25-01-D-XX-RA)
.200 5.08 REF
(TYP)
PLATING SPECIFICATION
-H: HEAVY GOLD
.125 [3.18 REF (TYP)
.120 3.05 REF
(USE T-1S52-01-H, T-1S53-01-H, IM-1G14-01-1-L)
(SEE NOTE 6)
(No OF POS / 16) x .7875[20.003] REF
.7875 20.00 REF
-F: FLASH SELECTIVE GOLD, MATTE TIN TAIL
(USE T-1S52-01-F, T-1S53-01-F, IM-1G14-01-1-F)
(SEE NOTE 6)
-L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
(USE T-1S52-01-L, T-1S53-01-L, IM-1G14-01-1-L)
(SEE NOTE 6)
C
L
.094 2.38 REF
.061 1.56 REF
C
7 EQ SPACES
@ .0750[1.905]
.16875±.0030 4.2863±0.076
(TYP - SEE NOTE 4)
C
L
QTS-25-01-D-XX-RA
01
.235 5.97
REF
.371 9.42
REF
.125 3.18 REF
02
.015 0.38 REF
.405 10.29
REF
.008 0.20 REF
.074 1.88
REF
C
.025 0.64 SQ
REF (TYP)
(SEE NOTE 4)
7 EQ SPACES
@ .080[2.03]
2
MAX SWAY
(TYP)
((No OF POS / 16) x .7875[20.003]) + .225[5.72] REF
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
NOTES:
C
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
1.
REPRESENTS A CRITICAL DIMENSION.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
2. BURR ALLOWANCE: .0010 MAX.
3. MINIMUM PUSHOUT FORCE: 5 OZ.
4. WELD TABS NOT AVAILABLE ON -016 POSITION.
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
code 55322
5. TIPS OF TERMINALS MAY NOT EXTEND BEYOND THIS SURFACE.
6. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
7. DESIGNED FOR USE WITH A .062 THICK PCB
8. PARTS TO BE PACKAGED IN TRAY AS STANDARD.
9. DELETE
SHEET SCALE: 1:0.666667
DESCRIPTION:
DO NOT SCALE DRAWING
MATERIAL:
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
INSULATOR:
TERMINAL & GROUND PLANE: PHOS BRONZE
DWG. NO.
QTS-XXX-01-X-D-DP-RA-WT-XXX
10. MAXIMUM TORQUE ON STS-02 TO BE 20 IN-OZ.
SHEET 1 OF 4
BY:
DEAN P
2-13-2003
F:\DWG\MISC\MKTG\QTS-XXX-01-X-D-DP-RA-WT-XXX-MKT.SLDDRW
REVISION AE
.098 2.49 REF
QTS-25-01-D-XX-RA
T-1S52-XX
.024 0.61 REF
T-1S53-01-XX
.110 2.79
C
C
IM-1G14-01-1-XX
.1510 3.835
(MEASURED
TERMINAL TO
TERMINAL)
.230 5.84
IN-PROCESS 1
.001[.03]-.006[.15]
(BOTH ROWS)
T-1S52-01-XX
C
IM-IG14-XX-1-X
C
C
SEE NOTE 5
SEE TABLE 1
C
C
.060 1.52
WT-16-01-T
.068 1.73
AE
.178 4.52
C
.132 3.35
.395 10.03
(SEE NOTE 4)
.052 1.31 REF
(SEE NOTE 4)
IN-PROCESS 2
.040 1.02 REF
.012 0.30 REF
.025 0.64 REF
C
T-1S53-XX-XX
.110 2.79
C
.299 7.59
.299 7.59
IN-PROCESS 3
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-X-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-X-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 2 OF 4
REVISION AE
((No OF POS / 16) x .7875[20.003]) + .330[8.38] REF
2 MAX SWAY
(TYP)
0.096 [2.44] REF
"A"
"A"
FIG. 2
-LS1 OPTION
(QTS-048-01-X-D-DP-RA-WT-LS1 SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
QTS-25-01-D-XX-RA-LS1
.072 1.83 REF
.301±.010 7.65±0.25
STS-02
(SEE NOTE 10)
SCREW CANNOT PROTRUDE
BEYOND THIS SURFACE
SP-18-01-TM
.150 3.81 REF
C
.125 3.18
.055 1.40
.035 0.89 REF
.035 0.89 REF
.125 3.18
C
.102 2.59
(((No OF POS / 16) x .7875[20.003]) + .330[8.38]) .005[0.13]
SECTION "A"-"A"
FIG. 3
-LS2 OPTION
(QTS-048-01-X-D-DP-RA-WT-LS2 SHOWN)
.096 2.44 REF
(CLEARANCE HOLE FOR USE
WITH 2-56 SCREW)
"B"
(SAME AS FIG. 2, EXCEPT AS SHOWN)
SP-18-01-TM
.150 3.81 REF
C
.055 1.40
"B"
QTS-25-01-D-XX-RA-LS2
.125 3.18
.035 0.89 REF
.125 3.18
SECTION "B"-"B"
(((No OF POS / 16) x .7875[20.003]) + .330[8.38]) .005[0.13]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-X-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-X-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 3 OF 4
REVISION AE
PPP-63
FIG. 4
-P OPTION
(QTS-075-01-X-D-DP-RA-WT-P SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.575 14.61
REF
{(NO OF POS x .0315 [.800] + .005 [.13])/2 .020 [.51]
.900 22.86 REF
+.005
-.010
+0.13
4.95
-0.25
.195
.433 11.00
REF
.300 7.62 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-X-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-X-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 4 OF 4
相关型号：
QTS-016-01-FTL-D-DP-EM2
Board Connector, 32 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal
SAMTEC
QTS-016-01-H-D-DP-EM2
Board Connector, 32 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
QTS-016-01-H-D-DP-RA
Board Connector, 32 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-016-01-H-D-DP-RA-LS2
Board Connector, 32 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-016-01-L-D-DP--EM3
32 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
SAMTEC
QTS-016-01-L-D-DP-RA
Board Connector, 32 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-016-01-STL-D-DP--EM2
32 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
SAMTEC
QTS-016-01-STL-D-DP--EM3
32 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
SAMTEC
©2020 ICPDF网 联系我们和版权申明