QTS-025-02-H-D-RA-WT [SAMTEC]
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,;
| 型号： | QTS-025-02-H-D-RA-WT |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, |
| 文件： | 总4页 (文件大小：485K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AN
QTS-XXX-XX-XXX-D-RA-WT-XXX
No OF POSITIONS
OPTION
-025, -050, -075, -100
[PER ROW]
-LS1: LOCKING SCREW
(FOR MATING WITH QSS...-RA...-LS1)
(USE WITH SP-18-01-TM SOLDER PIN)
(SEE FIG. 2, SHT 3)(SEE NOTE 11)
DO NOT
SCALE FROM
THIS PRINT
(SEE NOTE 5)
-LS2: LOCKING SCREW
LEAD STYLE
-01: .062 BOARD
-02: .093 BOARD
(FOR MATING WITH QSS...-LS2)
(USE WITH SP-18-01-TM SOLDER PIN)
(SEE FIG. 3, SHT 3)(SEE NOTE 11)
C1
((No OF POS / 25) x .7875[20.003]) + .580[14.73]
PLATING SPECIFICATION
-P: PICK AND PLACE PAD
(USE PPP-63) (SEE FIG. 4, SHT 4)
(SEE TABLE 3)
((No OF POS / 25) x .7875[20.003]) + .330[8.38] REF
-SP: SOLDER PIN
(NOT AVAILABLE W/ LSX OPTIONS)
(USE SP-19-T) (SEE FIG. 5, SHT 4)
ROW SPECIFICATION
-D: DOUBLE (USE QTS-25-01-D-XX-RA)
.250 6.35 REF (TYP)
.250 6.35 MAX REF (TYP)
.124 3.15 INSCRIBED
REF (TYP) (SEE NOTE 10)
-WT: WELD TAB
(SEE NOTE 5)(USE WT-16-XX-T)
.405 10.29
REF
.280 7.11
REF
-RA: RIGHT ANGLE
QTS-25-01-D-XX-RA
.120 3.05 REF
T-1S52-XXX
(No OF POS / 25) x .7875[20.003] REF
.7875 20.00 REF
.230 5.84
.110 2.79
IN-PROCESS 1
C
L
.094 2.38 REF
IM-IG14-XXX-1-X
24 EQ SPACES
@ .0250[.635]
C2
QTS-25-01-D-XX-RA
C
L
.09375±.0030 2.3813±0.076
(TYP) (SEE NOTE 5)
.061 1.56 REF
01
.371 9.42
REF
.395 10.03
.235 5.97
REF
IN-PROCESS 2
T-1S53-XX-XXX
02
.125 3.18
REF
.008 0.20 REF
.015 0.38 REF
.025 0.64 SQ
REF (TYP)
(SEE NOTE 5)
7 EQ SPACES
@ .080[2.03]
C3
2
MAX SWAY
(TYP)
.299 7.59
IN-PROCESS 3
NOTES:
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG. 1
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
QTS-075-01-XXX-D-RA-WT SHOWN
1.
REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .0010 MAX.
3. MINIMUM PUSHOUT FORCE: 5 OZ.
4. NOTE DELETED.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
5. WELD TABS NOT AVAILABLE ON -025 POSITION.
6. TIPS OF TERMINALS MAY NOT EXTEND BEYOND THIS SURFACE.
7. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
8. DESIGNED FOR USE WITH A .062 OR .093 THICK PCB.
9. PACKAGE IN TRAYS AS STANDARD.
SHEET SCALE: 1:0.8
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
INSULATOR: LCP, COLOR: BLACK
TERMINAL, WELD TAB & GROUND PLANE:
PHOS BRONZE
DWG. NO.
10.DELETE
SCREW: STEEL
QTS-XXX-XX-XXX-D-RA-WT-XXX
11. MAX TORQUE ON STS-02 TO BE 20 IN-OZ.
KEVIN B
08/03/01
SHEET 1 OF 4
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-RA-WT-XXX-MKT.SLDDRW
BY:
REVISION AN
.098 2.49 REF
.024 0.61 REF
T-1S53-01-XXX
IM-1G14-XX-1-XXX
(SEE TABLE 2)
.1510 3.835
(MEASURED
C4
TERMINAL TO
TERMINAL)
.001[0.03]-.006[0.15]
(BOTH ROWS)
T-1S52-01-XXX
C13
C5
C12
SEE NOTE 6
SEE TABLE 1
C6
"A"
C11
"B"
(SEE NOTE 5)
WT-16-XX-XX
(SEE TABLE 2)
(SEE NOTE 5)
C10
.132 3.35
(SEE NOTE 5)
.052 1.31 REF
(SEE NOTE 5)
.025 0.64 REF
.040 1.02 REF
.012 0.30 REF
C7
.110 2.79
.184 4.66
.299 7.59
C9
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-RA-WT-XXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-XX-XXX-D-RA-WT-XXX
BY:
KEVIN B
08/03/01
SHEET 2 OF 4
REVISION AN
2 MAX SWAY
(TYP)
FIG. 2
"A"
"A"
0.096 [2.44] REF
-LS1 OPTION
(QTS-075-01-XXX-D-RA-WT-LS1 SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(AVAILABLE ON -01 LEADSTYLE ONLY)
QTS-25-01-D-XX-RA-LS1
.246±.010 6.25±0.25
.072 1.83
REF
STS-02
(SEE NOTE 11)
SCREW CANNOT PROTRUDE
BEYOND THIS SURFACE
SP-18-01-TM C
C15
.055 1.40
.035 0.89 REF
.102 2.59
C14
(((NoOF POS/25) x .7875 [20.003]) + .330 [8.38]) .005 [.13]
SECTION "A"-"A"
FIG. 3
QTS-25-01-D-XX-RA-LS2
-LS2 OPTION
(QTS-075-01-XXX-D-RA-WT-LS2 SHOWN)
(SAME AS FIG. 2, EXCEPT AS SHOWN)
.096 2.44 REF
(CLEARANCE HOLE
FOR USE WITH 2-56 SCREW)
C15
C
SP-18-01-TM
.055 1.40
.035 0.89
C14
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
(((NoOF POS/25) x .7875 [20.003]) + .330 [8.38]) .005 [.13]
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-XX-XXX-D-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-RA-WT-XXX-MKT.SLDDRW
BY:
KEVIN B
08/03/01
SHEET 3 OF 4
REVISION AN
PPP-63
FIG.4
-P OPTION
(QTS-075-01-XXX-D-RA-WT-P SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.575 14.61
REF
.900 22.86 REF
{(No OF POS x .0315[.800] + .005[.13])/2} ± .020[.51]
+.005
-.010
+0.13
4.95
-0.25
.195
.433 10.99 REF
.300 7.62 REF
FIG. 5
-SP OPTION
(QTS-075-01-XXX-D-RA-WT-SP SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
C15
.055 1.40
SP-19-T
.035 0.89 REF
.102 2.59
C14
(((NoOF POS/25) x .7875 [20.003]) + .330 [8.38]) .005 [.13]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-XX-XXX-D-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-RA-WT-XXX-MKT.SLDDRW
BY:
KEVIN B
08/03/01
SHEET 4 OF 4
相关型号：
QTS-025-02-H-D-RA-WT-LS2
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-025-02-H-D-RA-WT-P
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-025-02-L-D-A
Board Stacking Connector, 50 Contact(s), 2 Row(s), Male, Straight, 0.025 inch Pitch, Surface Mount Terminal, Locking, Plug, ROHS COMPLIANT
SAMTEC
QTS-025-02-L-D-RA-WT-LS2
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-025-02-L-D-RA-WT-P
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-025-02-L-D-TR
Board Stacking Connector, 50 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
QTS-025-02-LM-D-RA-WT-LS2
Board Connector, 50 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明