QTS-032-01-F-D-DP-RA-WT [SAMTEC]
Board Connector, 64 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,;
| 型号： | QTS-032-01-F-D-DP-RA-WT |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 64 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, 连接器 |
| 文件： | 总4页 (文件大小：655K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QTS-XXX-01-XX-D-DP-RA-WT-XXX
REVISION X
OPTION
No OF POSITIONS
-016, -032, -048, -064
-LS1: LOCKING SCREW (SEE NOTE 10)
(FOR MATING WITH QSS...-RA...-LS1)
(USE WITH SP-18-01-TM SOLDER PIN)
(SEE FIG. 2, SHT 3)
DO NOT
SCALE FROM
THIS PRINT
[PER ROW]
C1
-LS2: LOCKING SCREW (SEE NOTE 10)
(FOR MATING WITH QSS...-LS2)
(SEE FIG. 3, SHT 3)
LEAD STYLE
((No OF POS / 16) x .7875[20.003]) + .580[14.73]
-01
(USE WITH SP-18-01-TM SOLDER PIN)
((No OF POS / 16) x .7875[20.003]) + .330[8.38] REF
-P: PICK AND PLACE PAD
(USE PPP-63) SEE FIG. 5, SHT 4)
.250 6.35 REF (TYP)
.250 6.35 MAX REF (TYP)
-WT: WELD TAB
SEE NOTE 4; USE WT-16-01-T
.130 3.30
REF (TYP)
(SEE NOTE 9)
-RA: RIGHT ANGLE
.280 7.11
REF
DIFFERENTIAL PAIR
ROW SPECIFICATION
-D: DOUBLE (USE QTS-25-01-D-XX-RA)
.200 5.08 REF
(TYP)
PLATING SPECIFICATION
-F: FLASH GOLD
.125 [3.18 REF (TYP)
.120 3.05 REF
(USE T-1S52-01-F, T-1S53-01-F, IM-1G14-01-1-F)
(SEE NOTE 6)
(No OF POS / 16) x .7875[20.003] REF
.7875 20.00 REF
-L: LIGHT GOLD
(USE T-1S52-01-L, T-1S53-01-L, IM-1G14-01-1-L)
(SEE NOTE 6)
C
-H: HEAVY GOLD
L
(USE T-1S52-01-H, T-1S53-01-H, IM-1G14-01-1-L)
(SEE NOTE 6)
.094 2.38 REF
.061 1.56 REF
C2
-FM: FLASH SELECTIVE GOLD, MATTE TIN TAIL
(USE T-1S52-01-F, T-1S53-01-F, IM-1G14-01-1-F)
-LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
(USE T-1S52-01-L, T-1S53-01-L, IM-1G14-01-1-L)
7 EQ SPACES
@ .0750[1.905]
.16875±.0030 4.2863±0.076
(TYP - SEE NOTE 4)
C
L
QTS-25-01-D-XX-RA
01
.235 5.97
REF
.371 9.42
REF
.125 3.18 REF
02
.015 0.38 REF
.405 10.29
REF
.008 0.20 REF
.074 1.88
REF
.025 0.64 SQ
REF (TYP)
(SEE NOTE 4)
C3
7 EQ SPACES
@ .080[2.03]
2
MAX SWAY
(TYP)
((No OF POS / 16) x .7875[20.003]) + .225[5.72] REF
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
NOTES:
C
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
1.
REPRESENTS A CRITICAL DIMENSION.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
2. BURR ALLOWANCE: .0010 MAX.
3. MINIMUM PUSHOUT FORCE: 5 OZ.
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
4. WELD TABS NOT AVAILABLE ON -016 POSITION.
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
5. TIPS OF TERMINALS MAY NOT EXTEND BEYOND THIS SURFACE.
6. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
7. DESIGNED FOR USE WITH A .062 THICK PCB
SHEET SCALE: 1:0.666667
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
INSULATOR:
8. PARTS TO BE PACKAGED IN TRAY AS STANDARD.
TERMINAL & GROUND PLANE: PHOS BRONZE
DWG. NO.
9. RECOMMENDED TORQUE ON HOLD DOWN SCREWS TO BE 20 IN-OZ +/- 5 IN-OZ.
10. MAXIMUM TORQUE ON STS-02 TO BE 20 IN-OZ.
QTS-XXX-01-XX-D-DP-RA-WT-XXX
SHEET 1 OF 4
BY:
DEAN P
2-13-2003
F:\DWG\MISC\MKTG\QTS-XXX-01-XX-D-DP-RA-WT-XXX-MKT.SLDDRW
REVISION X
QTS-25-01-D-XX-RA
T-1S52-XX
.098 2.49 REF
.024 0.61 REF
.110 2.79
T-1S53-01-XX
C8
W
.230 5.84
IN-PROCESS 1
C4
IM-1G14-01-1-XX
.1510 3.835
(MEASURED
TERMINAL TO
TERMINAL)
X
IM-IG14-XX-1-X
.001[.03]-.006[.15]
(BOTH ROWS)
T-1S52-01-XX
C13
C12
C5 SEE NOTE 5
SEE TABLE 1
C6
C11
.184 4.66
.060 1.52
.068 1.73
.395 10.03
IN-PROCESS 2
WT-16-01-T
C10
.132 3.35
(SEE NOTE 4)
.052 1.31 REF
(SEE NOTE 4)
T-1S53-XX-XX
.040 1.02 REF
.012 0.30 REF
.025 0.64 REF
C7
.110 2.79
C8
W
.184 4.66
C
L
.299 7.59
.419 10.64
C9
.299 7.59
IN-PROCESS 3
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.166667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-XX-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-XX-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 2 OF 4
REVISION X
((No OF POS / 16) x .7875[20.003]) + .330[8.38] REF
2 MAX SWAY
(TYP)
"A"
"A"
FIG. 2
-LS1 OPTION
(QTS-048-01-X-D-DP-RA-WT-LS1 SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.301±.010 7.65±0.25
QTS-25-01-D-XX-RA-LS1
STS-02
(SEE NOTE 10)
SCREW CANNOT PROTRUDE
BEYOND THIS SURFACE
SP-18-01-TM
.150 3.81 REF
C15
.125 3.18
.055 1.40
.035 0.89 REF
.035 0.89 REF
.125 3.18
C14
.096 2.45
(((No OF POS / 16) x .7875[20.003]) + .330[8.38]) .005[0.13]
SECTION "A"-"A"
FIG. 3
-LS2 OPTION
(QTS-048-01-X-D-DP-RA-WT-LS2 SHOWN)
(SAME AS FIG. 2, EXCEPT AS SHOWN)
"B"
SP-18-01-TM
.150 3.81 REF
.096 2.44 REF
(CLEARANCE HOLE FOR USE
WITH 2-56 SCREW)
C16
.055 1.40
"B"
QTS-25-01-D-XX-RA-LS2
.125 3.18
.035 0.89 REF
.125 3.18
SECTION "B"-"B"
(((No OF POS / 16) x .7875[20.003]) + .330[8.38]) .005[0.13]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C17
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-XX-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-XX-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 3 OF 4
REVISION X
PPP-63
FIG. 4
-P OPTION
(QTS-075-01-X-D-DP-RA-WT-P SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.575 14.61
REF
{(NO OF POS x .0315 [.800] + .005 [.13])/2 .020 [.51]
.900 22.86 REF
+.005
-.010
+0.13
4.95
-0.25
.195
.433 11.00
REF
.300 7.62 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.666667
.635mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP
DWG. NO.
QTS-XXX-01-XX-D-DP-RA-WT-XXX
F:\DWG\MISC\MKTG\QTS-XXX-01-XX-D-DP-RA-WT-XXX-MKT.SLDDRW
BY:
DEAN P
2-13-2003
SHEET 4 OF 4
相关型号：
QTS-032-01-F-D-DP-RA-WT-LS1
Board Connector, 64 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
QTS-032-01-F-D-DP-RA-WT-LS2
Board Connector, 64 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
QTS-032-01-FTL-D-DP--EM2
64 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
SAMTEC
QTS-032-01-FTL-D-DP-EM2
Board Connector, 64 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
QTS-032-01-H-D-DP
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
SAMTEC
QTS-032-01-H-D-DP--EM3
64 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT
SAMTEC
QTS-032-01-H-D-DP-RA-WT
Board Connector, 64 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
QTS-032-01-H-D-DP-RA-WT-LS1
Board Connector, 64 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
QTS-032-01-L-D-DP-EM3
Board Connector, 64 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明