RCMD-25-D-02-01 [SAMTEC]
Interconnection Device;
| 型号： | RCMD-25-D-02-01 |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device |
| 文件： | 总3页 (文件大小：366K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C
REVISION C
C
XX +.125 [3.18]
FIG. 1
RCMD-XX-X-XX-01-X-XXX-XXX
-.175 [4.45]
-D: DOUBLE END
SEE SHEET 3 FOR
IN-PROCESSES
5
OPTION #2
SHOWN: RCMD-20-D-XX-01
No OF POSITIONS
SEE OPTIONS BELOW
-10, -20, -22, -25
(PER ROW)
& ON SHEET 2
OPTION #1
SEE OPTIONS BELOW
END ASSEMBLY
-D: DOUBLE END (SEE FIG. 1)
-T: TRANSFER END (SEE FIG. 2)
& ON SHEET 2.
SEE TABLE 2 FOR DRAIN
WIRE LOCATION.
ASSEMBLED LENGTH
2 INCH MINIMUM
PLATING
(No OF POS x .07874[2.000])
+ .15748[4.000] REF (TYP)
(LEAVE BLANK FOR STANDARD)
-F: FLASH GOLD PLATING
(AVAILABLE WITH -T (TRANSFER
END) ONLY)
LEAD STYLE
DO NOT
SCALE FROM
THIS PRINT
(USE SUB-RCSD-XX-01-F)
.1575 4.00 REF (TYP)
WHITE STRIPE DESIGNATES POS 1
.010 0.25 MAX
2
CABLE OVERHANG
NOTES:
C
C
REPRESENTS A CRITICAL DIMENSION.
1.
.121 3.07 REF
2. HIDDEN LINES ARE USED TO SHOW POLARIZATION
WHEN USING -N OPTION.
C
1
3. TABLE 1: ITEMS #3 & #4 TO BE USED WITH TRANSFER
END ONLY.
4. NOTE DELETED.
.200±.010 5.08±0.25
(MEASURE AT END ONLY)
NOTCH DENOTES FIRST POSITION
FIG. 2
-T: TRANSFER END
SHOWN: RCMD-20-T-XX-01(-N)
.125 3.18 REF
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
2
1
4
SHEET SCALE: 1.25:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
2mm SHIELDED MALE CABLE ASSEMBLY
DWG. NO.
INSULATOR: BLACK G.F. POLYESTER
TERMINAL: PHOS BRONZE
CONTACT: BeCu
RCMD-XX-X-XX-01-X-XXX-XXX
3
KEVIN B
03/20/02
SHEET 1 OF 3
BY:
F:\DWG\MISC\MKTG\RCMD-XX-X-XX-01-X-XXX-XXX-MKT.SLDDRW
REVISION C
-R OPTION
REVERSE CONNECTOR
SHOWN: RCMD-20-XX-D-01-R
-R OPTION
REVERSE CONNECTOR (TRANSFER END)
SHOWN: RCMD-20-XX-T-01-R(-N)
FIRST POSITION
INDICATOR
FIRST POSITION
INDICATOR
-N OPTION
02
04
01
03
NOTCH POLARIZATION
(FOR -T ONLY)
02
01
.040 1.016 REF
.125 3.175 REF
NOTE:
IF OPTION IS SPECIFIED, ITEM #3 IN TABLE
WILL BE SUB-RCSD-XX-01-N
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
-P"XX" OPTION
NOTE:
POLARIZED MATING
XX = POSITION No.
DESCRIPTION:
OPTION ONLY AVAILABLE ON FEMALE END OF THE -T
(TRANSFER END, SEE TABLE 2, SHEET 1).
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
2mm SHIELDED MALE CABLE ASSEMBLY
DWG. NO.
INSERT POLARIZING KEY (PART No. PK-07)
INTO SPECIFIED POSITION "XX"
NOT AVAILABLE WITH SPECIFIED DRAIN WIRE
LOCATIONS (SEE TABLE 2, SHEET 1)
SHOWN: RCMD-20-T-XX-01-P04
THE POLARIZED POSITION WILL HAVE THE SAME ELECTRICAL
POSITION FROM THE WHITE STRIPE FIRST POSITION INDICATOR.
RCMD-XX-X-XX-01-X-XXX-XXX
SHEET 2 OF 3
F:\DWG\MISC\MKTG\RCMD-XX-X-XX-01-X-XXX-XXX-MKT.SLDDRW
BY:
KEVIN B
03/20/02
REVISION C
IN-PROCESS 1
IN-PROCESS 2
.210 5.33 (TYP BOTH ENDS)
.210 5.33 (TYP BOTH ENDS)
.123 3.12 (TYP)
GLUE DRAIN WIRES
IN PLACE
45°
(TYP)
RCSC-XX-30-1MM-G-XX
NOTCH CABLE
INSULATION & INTEGRATED SHIELD
REMOVED AT CUT LINE
IN-PROCESS 3
IN-PROCESS 4
.500 12.70 TAPE WIDTH REF
(TYP BOTH ENDS)
WHITE STRIPE ON
BOTTOM SIDE
.100
XX.XXX
.000
.130 3.29 (TYP)
.210 5.33 (TYP)
BT-200
C
.100[2.54] / .500 12.70
L
45°
(TYP)
TAPE SHOULD BE FLUSH
TO CABLE END (TYP)
TAPE OVERLAP TO APPEAR ONLY ON
BOTTOM SIDE OF CABLE
TRIM CABLE AND TAPE
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.25:1
2mm SHIELDED MALE CABLE ASSEMBLY
DWG. NO.
RCMD-XX-X-XX-01-X-XXX-XXX
F:\DWG\MISC\MKTG\RCMD-XX-X-XX-01-X-XXX-XXX-MKT.SLDDRW
BY:
KEVIN B
03/20/02
SHEET 3 OF 3
相关型号：
RCME0211700DYS03
RESISTOR, METAL FILM, 0.125 W, 0.5 %, 10 ppm, 1170 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明