RF058-01SB3-06SP7-0100 [SAMTEC]
Interconnection Device, LEAD FREE;
| 型号： | RF058-01SB3-06SP7-0100 |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device, LEAD FREE |
| 文件： | 总2页 (文件大小：158K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION L
RF058-XXXXX-XXXXXX-XXXX
CABLE CALLOUT
OVERALL CABLE LENGTH
MILLIMETERS OF CABLE
0100 MIN. (SEE NOTE 8 & 9)
DO NOT
SCALE FROM
THIS PRINT
058: CCA-058 (RG-58 COAXIAL CABLE)
FIG.2
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
END 1 CONNECTOR
L
-05SR: TNC-P-C-XX-SR-C10 (SEE SHEET 2)
-06SP: NTPE-P-C-XX-ST-C10 (SEE SHEET 2)
* -01BJ: SMA-J-C-XX-ST-B10 (SEE SHEET 2)
* -01SB: SMA-J-C-XX-ST-S10 (SEE SHEET 2)
* -01SP: SMA-P-C-XX-ST-C10 (SEE SHEET 2)
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD/NICKEL
L
(SEE TABLE 1)(SEE NOTES 12,13,14,15)
3: ALTERNATE GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
(SEE SHEET 2 FOR PLATING SPECIFICS)
(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
"A" mm
"B" mm
"C" mm
C
L END 1 PLATING OPTION
1: GOLD ALL COMPONENTS
END 2 CONNECTOR OR PREPARATION
-05SR: TNC-P-C-XX-SR-C10 (SEE SHEET 2)
-06SP: NTPE-P-C-XX-ST-C10 (SEE SHEET 2)
-01BJ: SMA-J-C-XX-ST-B10 (SEE SHEET 2)
-01SB: SMA-J-C-XX-ST-S10 (SEE SHEET 2)
-01SP: SMA-P-C-XX-ST-C10 (SEE SHEET 2)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
SEE NOTES 11-16 & SHEET 2, FIG. 3)
L
2: GOLD/NICKEL
3: ALTERNATE GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
(SEE SHEET 2 FOR PLATING SPECIFICS)
"D" mm
"E" mm
C
C
*
*
*
L
(* = NOT RELEASED FOR PRODUCTION)
(SEE FIG. 2) "C" FORMAT: X.X mm
(SEE FIG. 2) "B" FORMAT: X.X mm
(SEE FIG. 2) "A" FORMAT: X.X mm
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9.
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2).
(SEE TABLE 1 FOR SUBTRACTORS)
C
C
3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS
4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1
C
5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS
FIG.1
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3033-M.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS
RF058-05SRX-06SPX-XXXX SHOWN
9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA
10. MINIMUM BEND RADIUS FOR RG058 = 48.3 [1.90]
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
Pb
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A
F:\DWG\MISC\MKTG\RF058-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MILLIMETERS [INCHES].
TOLERANCES ARE:
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B
DECIMALS
ANGLES
2
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C
16. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED
.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
MATERIAL:
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
SEE END 1 AND END 2 ASSEMBLY PRINTS
RF058 CABLE ASSEMBLY
NO.
DWGR. F058-XXXXX-XXXXXX-XXXX
5/6/2005
SHEET 1 OF
2
BY: TIM P.
L
-05SR
-06SP
REVISION L
*-01BJ
(STRAIGHT PLUG)
(STRAIGHT PLUG)
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. TNC-P-C-XX-SR-C10
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. NTPE-P-C-XX-ST-C10
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. SMA-J-C-XX-ST-B10
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-P-C-HN-ST-C10)
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-B10)
PLATING OPTION
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-P-C-GN-SR-C10)
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-P-C-GN-ST-C10)
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-GF-ST-B10)
NOTE: ALL CRITICAL DIMENSIONS ON TNC-P-C-XX-SR-C10
THAT APPLY MUST BE VERIFIED.
NOTE: ALL CRITICAL DIMENSIONS ON NTPE-P-C-XX-ST-C10
THAT APPLY MUST BE VERIFIED.
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-XX-ST-B10
THAT APPLY MUST BE VERIFIED.
L
L
*-01SB
*-01SP
FIG.3
(SEALED STRAIGHT BULKHEAD JACK)
(STRAIGHT PLUG)
RF058-05SRX-102148-XXXX SHOWN
(USE DRAWING No. SMA-J-C-XX-ST-S10
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. SMA-P-C-XX-ST-C10
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-S10)
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-P-C-H-ST-C10)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-GF-ST-S10)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-P-C-GF-ST-C10)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-XX-ST-S10
THAT APPLY MUST BE VERIFIED.
NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-XX-ST-C10
THAT APPLY MUST BE VERIFIED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
RF058 CABLE ASSEMBLY
DWG. NO.
RF058-XXXXX-XXXXXX-XXXX
F:\DWG\MISC\MKTG\RF058-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
5/6/2005
SHEET 2 OF
2
BY: TIM P.
相关型号：
©2020 ICPDF网 联系我们和版权申明