S1SD-10-28-T-12.00-L2 [SAMTEC]
Cable Assembly,;
| 型号： | S1SD-10-28-T-12.00-L2 |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly, |
| 文件： | 总3页 (文件大小：488K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S1SDX-XX-XXX-XX-XX.XX-LX
REVISION H
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
PATENT PENDING
FEP CABLE OPTION
PINOUT
-T: FEP INSULATION
(ONLY AVAILABLE IN 28 AWG)
LEAVE BLANK FOR PVC
(SEE NOTE 8)
(LEAVE BLANK FOR SINGLE END ASSEMBLY)
-1: "N" INDICATOR DOWN, CROSSED
PIN 1 TO PIN 1 (SEE FIG 2, SHT 2)
-2: "N" INDICATOR DOWN, STRAIGHT
PIN 1 TO PIN 2 (SEE FIG 3, SHT 2)
-3: "N" INDICATOR UP, CROSSED
PIN 1 TO PIN N (SEE FIG 4, SHT 3)
-4: "N" INDICATOR UP, STRAIGHT
PIN 1 TO PIN N-1 (SEE FIG 5, SHT 3)
DO NOT
SCALE FROM
THIS PRINT
0.050±0.040 .0020±.0016
(TYP) REF
No OF POSITIONS (PER ROW)
-02 THRU -10
**-11 THRU **-20
WIRE GAUGE (AWG)
-28, -30
LATCH OPTION
-L: PLASTIC LATCH
DETAIL 'A'
SCALE 18 : 1
COLOR CODE
-C COLOR CODE WIRE
(SEE TABLE 4, SHT 2)
C-309-01-XX
ASSEMBLED LENGTH
(SPECIFY IN INCHES) 01.80 IN MINIMUM
LEAVE BLANK FOR STANDARD WIRE
(SEE TABLE 2, SHT 2)
(NOT AVAILABLE WITH S1SDT)
PLATING SPECIFICATION
-T: BRIGHT ACID TIN TIN CONTACT AND TAIL
-GF: 3µ" GOLD CONTACT AND TAIL
(** = NOT RELEASED FOR PRODUCTION)
DWCX-XX-XX-XXX
(SEE TABLE 2, SHT 2)
7.00 .276 REF
SEE NOTE 6
'B'
DETAIL 'B'
SCALE 8 : 1
C
ASSEMBLIED LENGTH
2.00 .079 REF
(** = NOT RELEASED
FOR PRODUCTION)
(SEE NOTE 4)
5.55 .219 REF
N-1 (SEE TABLE 1)
1.00 .039 (TYP)
(TOL NON-ACCUM)
C
3.25 .128 REF
L
N (SEE TABLE 1)
(No OF POS + 0.35[.014]) REF
"N" INDICATOR
'A'
C
(No OF POS - 1.00[.039])
(No OF POS +
1.50[.059]) REF
(No OF POS +
4.30[.169]) REF
C
L
01
02
POS 1 INDICATOR
ISD1-XX
FIG 1
NOTES:
S1SD-10-XXX-XX-XX.XX-L SHOWN
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: SIGNAL: 4.445N[1.0 LB].
3. PARTS TO BE PACKAGED IN BAG.
4. FOR ASSEMBLIED LENGTHS LESS THAN 12.0[305], TOLERANCE SHALL BE
± 3.18[.125], FOR OTHER LENGTHS, TOLERANCE SHALL BE ± 2%.
5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE.
7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST
AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL WITH 1 ET STAMP
ON THE BODY.
8. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY.
9. REFER TO CRIMP SPECIFICATIONS PRINT FOR STRIP AND CRIMP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
10. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR.
11. TABLE 3 IS DELETED AND REPLACED WITH EQUATIONS.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS
ANGLES
2
X.X: 0.3 [.01]
C
C
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
INSULATOR: NYLON UL94V-2, COLOR: WHITE
CONTACT: PHOS BRONZE
1MM S1SD CABLE ASSEMBLY
DWG. NO.
S1SDX-XX-XXX-XX-XX.XX-LX
F:\DWG\MISC\MKTG\S1SDX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW
BY: VICKY Z
06/22/2013
SHEET 1 OF
3
REVISION H
ASSEMBLIED LENGTH
(SEE NOTE 4)
(SEE TABLE 1, SHT 1)
N-1
(SEE TABLE 1, SHT 1)
"N" INDICATOR DOWN
END 1
N
END 2
N-1
N
"N" INDICATOR UP
POS 1 INDICATOR
01
02
01
02
FIG 2
S1SD-10-XXX-XX-XX.XX-L1 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
ASSEMBLIED LENGTH
(SEE NOTE 4)
(SEE TABLE 1, SHT 1)
(SEE TABLE 1, SHT 1)
"N" INDICATOR DOWN
END 2
END 1
N-1
N
N
N-1
"N" INDICATOR UP
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
01
02
01
02
POS 1 INDICATOR
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
1MM S1SD CABLE ASSEMBLY
FIG 3
DWG. NO.
S1SD-10-XXX-XX-XX.XX-L2 SHOWN
S1SDX-XX-XXX-XX-XX.XX-LX
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
SHEET 2 OF
3
BY: VICKY Z
06/22/2013
F:\DWG\MISC\MKTG\S1SDX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW
REVISION H
CABLE CUT IN-PROCESS
ASSEMBLIED LENGTH
(SEE NOTE 4)
1.40 .055
(SEE TABLE 1, SHT 1)
1.40 .055
END 1
END 2
N-1
N
02
01
"N" INDICATOR UP
OVERALL LENGTH
(SEE TABLE 5)
OVERALL LENGTH
(SEE TABLE 5)
"N" INDICATOR UP
N
N-1
01
02
(SEE TABLE 1, SHT 1)
1.40 .055
FIG 4
S1SD-10-XXX-XX-XX.XX-L3 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
-S: SINGLE END
-D: DOUBLE END
ASSEMBLIED LENGTH
(SEE NOTE 4)
(SEE TABLE 1, SHT 1)
END 1
END 2
02
01
N-1
N
"N" INDICATOR UP
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
"N" INDICATOR UP
01
02
N
N-1
(SEE TABLE 1, SHT 1)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
1MM S1SD CABLE ASSEMBLY
FIG 5
DWG. NO.
S1SD-10-XXX-XX-XX.XX-L4 SHOWN
S1SDX-XX-XXX-XX-XX.XX-LX
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
SHEET 3 OF
3
BY: VICKY Z
06/22/2013
F:\DWG\MISC\MKTG\S1SDX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW
相关型号：
©2020 ICPDF网 联系我们和版权申明