S1SS-19-30-C-T-01.80-D-NDS [SAMTEC]
Cable Assembly;
| 型号： | S1SS-19-30-C-T-01.80-D-NDS |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly |
| 文件： | 总2页 (文件大小：293K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S1SSX-XX-XXX-XX-XX.XX-X-XXX
REVISION H
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
OPTION
FEP CABLE OPTION
-T: FEP INSULATION
(ONLY AVAILABLE IN 28 AWG)
LEAVE BLANK FOR PVC
DOUBLE
DO NOT
SCALE FROM
THIS PRINT
(MUST BE USED ON -D END OPTION ONLY
& APPLIES TO END 2 HOUSING)
-NUS: NO LATCH, "N" UP, STRAIGHT
-NDS: NO LATCH, "N" DOWN, STRAIGHT
No OF POSITIONS
-02, -03, -05, -07, -10, -15, -20
(PER ROW) AVAILABLE AS STANDARD
-02 THRU -20 AVAILABLE AS ASO
END OPTION
-S: SINGLE END
-D: DOUBLE END
WIRE GAUGE (AWG)
-28, -30
ASSEMBLIED LENGTH
(SPECIFY IN INCHES)
01.80 IN MINIMUM
COLOR CODE
-C: COLOR CODE WIRE
(SEE TABLE 3, SHEET 2)
PLATING SPECIFICATION
-T: TIN PLATING
-GF: 3u" MIN Au/50u" Ni
IN CONTACT AND TAIL
LEAVE BLANK FOR STANDARD WIRE
(SEE TABLE 1 )
0.050±0.040 .0020±.0016
(TYP)
NOT AVAILABLE WITH S1SST
'B'
5.00 .197 REF
DETAIL 'A'
SCALE 12 : 1
C-309-01-XX
C
ASSEMBLIED LENGTH
(SEE NOTE 4)
2.80 .110 REF
POSITION 1 INDICATOR
20±10 .8±.4
01
02
LABEL-ET
"A"
REF
"B"
REF
"C"
REF
'A'
"D"
C
DWCX-XX-XX-XXX
ISS1-02
FIG 1
S1SS-02-30-XX-XX.XX-S SHOWN
1.03 .040
DETAIL 'B'SEE NOTE 6
SCALE 8 : 1
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
PROPRIETARY NOTE
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
2. MINIMUM PUSHOUT FORCE: SIGNAL: 6.6N[1.5 LB], WELD TAB: 4.90N[1 LB].
3. PARTS TO BE PACKAGED IN BAG.
DECIMALS
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
X.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
4. FOR ASSEMBLIED LENGTHS LESS THAN 13.00 IN, TOLERANCE SHALL BE
± .125[3.18], FOR OTHER LENGTHS, TOLERANCE SHALL BE ± 2%.
5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE.
7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST AT
1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH (1)
LABEL-ET.
X.XX: 0.13 [.005]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
X.XXX: 0.051 [.0020]
code 55322
MATERIAL:
SHEET SCALE: 6:1
DO NOT SCALE DRAWING
INSULATOR: PPA UL 94-V0, COLOR: BLACK
CONTACT: PHOS BRONZE
C
C
1MM CABLE ASSEMBLY
DWG. NO.
S1SSX-XX-XXX-XX-XX.XX-X-XXX
BY:
VICKY Z
04/13/2010 SHEET 1 OF 2
F:\DWG\MISC\MKTG\S1SSX-XX-XXX-XX-XX.XX-X-XXX-MKT.SLDDRW
REVISION H
ASSEMBLIED LENGTH
(SEE NOTE 4)
"N" LOGO UP
01
02
01
"N" LOGO UP
02
FIG 2
S1SS-02-30-XX-XX.XX-D-NUS SHOWN
(SAME AS FIG 1, EXCEPT AS SHOWN)
ASSEMBLIED LENGTH
(SEE NOTE 4)
01
"N" LOGO DOWN
01
02
"N" LOGO UP
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
02
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
ISS1-02
FIG 3
S1SS-02-30-XX-XX.XX-D-NDS SHOWN
(SAME AS FIG 1, EXCEPT AS SHOWN)
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
1MM CABLE ASSEMBLY
DWG. NO.
S1SSX-XX-XXX-XX-XX.XX-X-XXX
F:\DWG\MISC\MKTG\S1SSX-XX-XXX-XX-XX.XX-X-XXX-MKT.SLDDRW
BY:
VICKY Z
04/13/2010 SHEET 2 OF 2
相关型号：
©2020 ICPDF网 联系我们和版权申明