S2SD-10-24C-S-08.00-S [SAMTEC]
Board Connector, 20 Contact(s), 2 Row(s), Female, Socket, ROHS COMPLIANT;
| 型号： | S2SD-10-24C-S-08.00-S |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 20 Contact(s), 2 Row(s), Female, Socket, ROHS COMPLIANT |
| 文件： | 总4页 (文件大小：374K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION J
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
TEFLON CABLE OPTION
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D, -DL, -DR, -DS)
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO N-1) (SEE FIG 2)
-T: TEFLON (AVAILABLE WITH
24, 28 & 30AWG ONLY)
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
FIG 1
S2SDX-05-24-X-XX.XX-S SHOWN
DO NOT
SCALE FROM
THIS PRINT
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO 2) (SEE FIG 4)
No OF POSITONS
-02, -04, -05, -07, -10, -15, -20,
-25, & -30 (PER ROW)
AVAILABLE AS STANDARD
-05 THRU -50 AVAILABLE AS ASO
2.00 .079 REF
N (SEE TABLE 1)
-NUX: NOTCH UP, CROSSED
(PIN 1 TO N) (SEE FIG 3)
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO 1) (SEE FIG 5)
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
02
WIRE GAUGE (AWG)
END OPTION
7.52 .296
REF
-24, -26, -28, & 30
2.00 .079 REF
-S: SINGLE ENDED (SEE FIG 1)
-D: DOUBLE ENDED (SEE FIG'S 2, 3, 4, 5, 6, & 7)
-SR: SINGLE ENDED WITH RETENTION LATCH
(SEE FIG 6)
COLOR CODE:
(LEAVE BLANK FOR ALL BLACK WIRE)
-C: COLOR CODED WIRE, SEE TABLE 3,
SHEET 3 FOR COLOR SEQUENCE
(AVAILABLE WITH 24 AWG ONLY &
NOT AVAILABLE WITH TEFLON)
01
-DR: DOUBLE ENDED WITH RETENTION LATCH
(SEE FIG 7)
N-1 (SEE TABLE 1)
3.32 .131 REF
**-SS: SINGLE ENDED WITH SCREW DOWN
(SEE SHEET 4 FIG 8)
ONLY AVAILABLE IN -10, -20, -30,
& -40 POSITIONS
(No OF POS X 2.00[.079])
+ .43[.017] REF
**-DS: DOUBLE ENDED WITH SCREW DOWN
(SEE SHEET 4 FIG 9)
PLATING SPECIFICATION
-L: LIGHT SELECTIVE
-S: SELECTIVE
ONLY AVAILABLE IN -10, -20, -30,
& -40 POSITIONS
(No OF POS X 2.00[.079])
+ .86[.034] REF
4.39 .173 REF
5.29 .208 REF
"A"
ASSEMBLED LENGTH
SPECIFY IN INCHES
SINGLE ENDED: 02.75 INCH MINIMUM
DOUBLE ENDED: 02.75 INCH MINIMUM
4.42 .174 REF
11.38 .448
REF
ISD2-XX-D
** = NOT RELEASED FOR PRODUCTION
1.60 .063 REF
C
ASSEMBLED LENGTH
(SEE NOTE 8)
DWC-XX-XX-300
NOTES:
"A"
C
SECTION "A"-"A"
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 11.1N [2.5LBS].
3. CONTACTS MUST BE INSERTED UNTIL RETENTION
FEATURES LOCK INTO PLACE.
C
C
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
4. ALL FINISHED GOODS ARE TO BE ELECTRICALLY
TESTED INCLUDING HI-POT TEST AT 1000 VOLTS DC.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH
(1) LABEL-ET.
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
X.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
X.XX: 0.13 [.005]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
X.XXX: 0.051 [.0020]
e-Mail info@SAMTEC.com
7. END OF DISCRETE WIRE MUST FALL WITHIN THIS RANGE AFTER CRIMP.
8. FOR LENGTHS OF 12.00 INCHES AND LESS, TOLERANCE TO BE ± 3.18[.125],
FOR LENGTHS GREATER THAN 12.00 INCHES, TOLERANCE TO BE ± 2%
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
2.00mm SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCU
CABLE INSULATION: SEE CALLOUT
WIRE: TINNED COPPER
9. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING AND ITS REQUIREMENTS.
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
10. 20.0N[4.5 LB] MIN WIRE CRIMP STRENGTH FOR 24-28 AWG AND
13.3N[3.0 LB] MIN WIRE CRIMP STRENGTH FOR 30AWG.
SHEET 1 OF 4
BY:
J. BORGELT 2/20/09
F:\DWG\MISC\MKTG\S2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
FIG 2
FIG 6
REVISION J
(S2SDX-05-28-X-XX.XX-D-NUS SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
(PIN 01 TO N-1)
(S2SDX-05-28-X-XX.XX-SR SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
C
2.64 .104 (TYP)
ASSEMBLED LENGTH
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
(SEE NOTE 8)
C
N-1
01
N
02
N
01
NOTCH
UP
NOTCH
UP
N-1
02
2.07 .081 (TYP)
FIG 3
(S2SDX-05-28-X-XX.XX-D-NUX SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
(PIN 01 TO N)
SUB-IM-LTC-07-01-N
ISD2-XX-D-R
2.03 .080 (TYP)
N-1
N
02
N
01
NOTCH
UP
NOTCH
UP
FIG 7
(S2SDX-05-28-X-XX.XX-DR-DUS SHOWN)
(SAME AS FIG. 6 EXCEPT AS SHOWN)
N-1
01
02
FIG 4
(S2SDX-05-28-X-XX.XX-D-NDS SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
(PIN 01 TO 02)
02
N
01
02
N
01
NOTCH
DOWN
NOTCH
UP
ISD2-XX-D-R
SUB-IM-LTC-07-01-N
N-1
N-1
FIG 5
(S2SDX-05-28-X-XX.XX-D-NDX SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
(PIN 01 TO 01)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
02
N
01
02
N
01
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
NOTCH
DOWN
NOTCH
UP
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2.00mm SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
N-1
N-1
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
J. BORGELT 2/20/09
SHEET 2 OF 4
F:\DWG\MISC\MKTG\S2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REVISION J
IN-PROCESS 1
(APPLIES TO -S, & -SR END OPTIONS ONLY)
(TO BE BUILT DOUBLE-ENDED INITIALLY
FOR E-TEST AND THEN SEPERATED)
ASSEMBLED LENGTH
(SEE NOTE 8)
(ASSEMBLED LENGTH X 2)
+ 12.70[.500] ADDER
(SEE NOTE 8)
CUT LINE
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2.00mm SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\S2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
J. BORGELT 2/20/09
SHEET 3 OF 4
REVISION J
FIG 8
-SS: SINGLE ENDED WITH SCREW DOWN
(S2SDX-05-28-X-XX.XX-SS SHOWN)
FIG 9
-DS: DOUBLE ENDED WITH SCREW DOWN
(S2SDX-05-28-X-XX.XX-DS-NUS SHOWN)
(ONLY AVAILABLE IN -10, -20, -30 & -40 POSITIONS)
(SAME AS FIG 8, EXCEPT AS SHOWN)
NOT RELEASED FOR PRODUCTION
(ONLY AVAILABLE IN -10, -20, -30 & -40 POSITIONS)
(SAME AS FIG 1, EXCEPT AS SHOWN)
NOT RELEASED FOR PRODUCTION
C
(No OF POS X 2.00[.079])
+ 8.29[.326] .30[.012]
CPS-RR-M2-01-X
CPS-RR-M2-01-X
2.00 .079
REF
C
3.68±0.30 .145±.012
'B'
ISD2-05-D-X
ISD2-05-D-X
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
"C"
"C"
DETAIL 'B'
SCALE 4 : 1
R1.45 .057
F:\DWG\MISC\MKTG\S2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ACCRT-01
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
C
SECTION "C"-"C"
SCALE 4 : 1
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2.00mm SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
J. BORGELT 2/20/09
SHEET 4 OF 4
相关型号：
S2SD-10-26-L-03.54-SR
Board Connector, 20 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明