SCRES-G-00.55-BC-C5E [SAMTEC]
Rectangular Connector,;
| 型号： | SCRES-G-00.55-BC-C5E |
| 厂家： | 
SAMTEC |
| 描述： | Rectangular Connector, |
| 文件： | 总6页 (文件大小：648K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SCRES-X-XX.XX-XX-C5E
REVISION U
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
Pb
PLATING SPECIFICATION
END OPTION
DO NOT
SCALE FROM
THIS PRINT
-G: .000050" GOLD ON
CONTACT AREAS,
NICKEL ON SHELLS
-D: DOUBLE ENDED
(ONE END SEALED)
(SEE FIG.1, SHT. 1)
-BC: BLUNT CUT
C
(XX.XX METERS + 0.01 METERS) 2%
(SEE FIG.2, SHT. 2)
LENGTH
-XX.XX (IN METERS)
(0.17M MIN - 50.00M MAX)
XX.XX METERS
11.68 .460 REF
END 1
END2
48.45 1.907 REF
9
14.61 .575
REF
20.00±10.00 .787±.394
01
08
01
08
FIG 1
SCRES-G-XX.XX-D-C5E
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
C
2. ASSEMBLY TO BE 100% TESTED TO CAT5e USING FLUKE DTX-1800 CABLE ANALYZER, AFTER FINAL
ELECTRICAL TEST, LABELED. FOR BLUNT CUT OPTION, A LABEL WILL BE BE APPLIED TO BOTH ENDS.
3. NOTE DELETED.
C
4. PANEL THICKNESS: 0.8[.03] - 5.2[.20].
5. PANEL NUT TORQUE SPECIFICATION: 12 IN-LB.
6. PART MUST SCREW INTO SAMTEC PART # SCN-17-01.
7. PART MUST SCREW INTO SAMTEC PART # SPN-17-01
8. FLAT REQUIRED AT PARTING LINE OF CAMS TO AVOID DRAGGING THREADS.
9. NOTE DELETED.
10. ALL IDENTIFICATION MARKS MUST NOT STAND GREATER THAN 0.051[.002]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
OFF THE SURFACE OF THE PART.
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
11. MOLD TO BE INSERTED TO ACCEPT DIFFERENT CABLE DIAMETERS.
12. ALL EJECTOR PIN AND GATE LOCATIONS MUST BE APPROVED BY SAMTEC
PRODUCT ENGINEERING.
DECIMALS
ANGLES
X.X: 0.35[.014]
X.XX: 0.25[.010]
X.XXX: 0.15[.0060]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
13. ANY ADDITIONAL VOIDING AND/OR MODIFICATIONS TO VOIDING MUST BE
APPROVED BY SAMTEC PRODUCT ENGINEERING.
14. SAMTEC LOGO SHALL APPEAR ON SURFACE SHOWN,
APPROXIMATELY 1.88 X 3.00.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1.53846
DESCRIPTION:
CABLE: PVC, COPPER
CONNECTOR: PBT, COPPER ALLOY
O-RING: SILICONE
SEALED CIRCULAR RECEPTACLE, ETHERNET
15. COMPONENTS OF ASSEMBLY TO BE INSPECTED USING COMPONENT PRINTS.
16. ASSEMBLY TO BE PACKAGED IN BULK.
17. NOTE DELETED.
DWG. SCRES-X-XX.XX-XX-C5E
NO.
PCB: FR4, COPPER
OVERMOLD, NUT: NYLON
PREMOLD: TPE
3/17/2009 SHEET 1 OF 6
BY: CHADP
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
C
REVISION U
XX.XX METERS + 0.01 METERS
FIG 2
SCRES-G-XX.XX-BC-C5E
(SAME AS FIG 1 UNLESS OTHERWISE STATED)
+0.00
-0.52
+.000
.125
-.020
XX.XX±2%
3.18
1
+0.00
-0.52
+.000
.590
-.020
14.98
-D: IN-PROCESS 1
CUT CABLE TO LENGTH
& ADD ETHERNET BOOT
10
+0.00
-0.52
+.000
1.091
-.020
27.70
14.00 .551
RECOMMENDED PANEL HOLE
(SEE NOTE 4)
SHIELD
-D: IN-PROCESS 2
STRIP OUTER JACKET TO DIMENSION SHOWN
3.18 .125
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TWISTED SHIELD
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
-D: IN-PROCESS 3
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
END 1: TWIST SHIELD TO FORM SINGLE CONDUCTOR.
SEALED CIRCULAR RECEPTACLE, ETHERNET
STRIP INDIVIDUAL WIRES TO DIMENSION SHOWN & TIN DIP
END 2: FOLD BACK SHIELD
NO.
DWG.SCRES-X-XX.XX-XX-C5E
SHEET 2 OF 6
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
BY:CHADP
3/17/2009
REVISION U
C
0.00
+.000
-.025
15.49-0.63 .610
2
3
FIG4
CONNECTOR SOLDERED TO PCB
TRIM CLIPS TO FLUSH OR BELOW
0.00+0/.5
0.25 .010
MAX
DETAIL 'U'
SCALE 3 : 1
'U'
FIG 3
-D: IN-PROCESS 4
SHEAR SHIELD TABS AND ALIGNMENT PINS
FLUSH WITH BOTTOM OF CONNECTOR
ADD SOLDER TO PCB
"E"
"E"
TWISTED SHIELD
-D: IN-PROCESS 5
TERMINATE CABLE TO PCB, BRAID TO CONNECTOR SHIELD
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
3.59 .141 MAX
(SHIELD TO BE SOLDERED IN
THIS AREA)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
SEALED CIRCULAR RECEPTACLE, ETHERNET
NO.
DWG. SCRES-X-XX.XX-XX-C5E
SECTION "E"-"E"
CHADP
3/17/2009
SHEET 3 OF 6
BY:
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
REVISION U
-D: IN-PROCESS 6
TERMINATE
(SEE NOTE 2)
11.47 .452
22.79 .897
4
6.10 .240
(SEE NOTE 11)
6.35 .250
6.71 .264
32.39 1.275
-D: IN-PROCESS 7
ADD PREMOLD
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
SEALED CIRCULAR RECEPTACLE, ETHERNET
DWG. NO.
SCRES-X-XX.XX-XX-C5E
3/17/2009 SHEET 4 OF 6
BY: CHADP
5.200 .2047
-Z-
REVISION U
23.18 .913
34.40 1.354
(SEE NOTE 8)
0.20
"A"
SEE NOTE 15
32.25±0.03 1.270±.001
0.10
Z
X
7
8
5
GATE LOCATION
"D"
"A"
16.75 .659
0.15
Y
X
10.50 .413
39.9 1.57
-X-
9.00 .354
25.31 .996
5.00 .197
TSC
7
16
2.30 .091
25.4 .998
1
-18 UNEF-2A THREAD
-Y-
1.93 .076
1.60 .063
0.38 .015
31.0 1.22
(SEE NOTE 7)
C
9.65 .380
"D"
-18 UNEF-2A THREAD
0.10
Y X
1
1.00 .039
1
16
(SEE NOTE 8)
21.00 .827
0.10
Z X
15.80 .622
0.15
Y X
10.16 .400
C
25.4 1.00
(SEE NOTE 8)
3.30 .130
C
'C''
6
+0.25
-0.15
+.010
30.63
1.206
-0.005
27.00±0.003 1.063±.000
R3.15 .124
+0.05
-0.25
+.002
27.13
1.068
-0.009
C
-D: IN-PROCESS 8
ADD OVER MOLD, O-RING,
GASKET & NUT
C
+0.10
-0.05
+.004
14.50
.571
-.002
(SEE NOTE 2)
C
'B'
3.000±0.051 .1181±.0020
SECTION "A"-"A"
0.50 .020
2.500 .0984
OR-17-01, SPG-17-01, & SPN-17-01
REMOVED FOR CLARITY
4.40 .173
30°
(2 PLCS)
PROPRIETARY NOTE
*
*
R0.25 .010
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
C
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
3.30 .130
2.20±0.080 .087±.003
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
SEALED CIRCULAR RECEPTACLE, ETHERNET
R0.25 .010
NO.
DWG. SCRES-X-XX.XX-XX-C5E
DETAIL 'C''
SCALE 2 : 1
DETAIL 'B'
SCALE 2 : 1
3/17/2009
SHEET 5 OF
6
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
BY:CHADP
REVISION U
C
(XX.XX METERS x 2) + 0.05 METERS
-BC: IN-PROCESS 5
(SAME AS -D IN-PROCESS 7 UNLESS OTHERWISE STATED)
-BC IN-PROCESS 1
CUT CABLES TO LENGTH
-BC: IN-PROCESS 2
(SAME AS -D UNLESS OTHERWISE STATED)
-BC: IN-PROCESS 6
(SAME AS -D IN-PROCESS 8 UNLESS OTHERWISE STATED)
(SEE NOTE 2)
TWISTED SHIELD
-BC: IN-PROCESS 3
(SAME AS -D UNLESS OTHERWISE STATED)
SOLDER BRAID TO SHIELD
-BC: IN-PROCESS 7
CUT IN HALF & TRIM TO LENGTH
ADD O-RING, GASKET & NUT
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
-BC: IN-PROCESS 4
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
(SAME AS -D UNLESS OTHERWISE STATED)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
SEALED CIRCULAR RECEPTACLE, ETHERNET
NO.
DWG. SCRES-X-XX.XX-XX-C5E
3/17/2009 SHEET 6 OF 6
F:\DWG\MISC\MKTG\SCRES-X-XX.XX-XX-C5E-MKT.SLDDRW
BY: CHADP
相关型号：
©2020 ICPDF网 联系我们和版权申明