SEAF-40-05.0-L-10-2-A-K [SAMTEC]
Board Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Plug;
| 型号： | SEAF-40-05.0-L-10-2-A-K |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Plug PC 连接器 |
| 文件： | 总5页 (文件大小：1402K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
REVISION BM
No OF POSITIONS
"A" REF
.156 3.96 REF
.033 0.84 REF
.033 0.84
REF
-10, -15, **-19, -20
-25, -30, -40, -50
(PER ROW)
C
K-DOT
"C" SPCS. @ .0500= "D"
(SEE SHT 2, FIG 3 )
(SEE NOTE 7)
LEAD STYLE
DO NOT
SCALE FROM
THIS PRINT
-05.0: .199[5.05] HEIGHT
-06.0: .238[6.05] HEIGHT
-06.5: .258[6.55] HEIGHT
*** -07.5: .297[7.54] HEIGHT
(SEE TABLE 1)
.0500 1.270 (TYP)
OPTION
****-LP: LATCH POST OPTION
(SEE SHT 4, FIG 8 )
.361 9.17 REF
08
"A"
C
L
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, -04, -06, -08 & -10 ROW)
(-K OPTION NOT AVAILABLE ON -10
OR -15 POSITION)
PLATING SPECIFICATION
-S: SELECTIVE GOLD (30µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X)
-L: LIGHT GOLD (10µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-L-X)
-SM: SELECTIVE GOLD (30µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X)
C
.423 10.74
REF
.200 5.08
REF
***** -RP: RETENTION PIN
(SEE SHT 4, FIG 9)
C
L
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, 6, 8 & 10 ROWS)
-PP: POLARIZATION PIN
(SEE SHT 4, FIG 10)
01
"A"
SEE NOTE 17
"B" REF
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, 6, 8 & 10 ROWS)
ROWS
-04: 4 ROWS (SEE SHT 5, FIG 11)
-05: 5 ROWS (SEE SHT 3, FIG 5)(SEE NOTE 18)
-06: 6 ROWS (SEE SHT 3, FIG 4)
-08: 8 ROWS (SEE SHT 1, FIG 1)
-10: 10 ROWS (SEE SHT 2, FIG 2)
ALIGNMENT PINS
'C'
(SEE NOTES 6, 12 & 14)
SEAF-XX-XX.X-08-A
C
SOLDER COMPOSITION & STYLE
-1: 63% TIN / 37% LEAD
CHARGE TAIL
"F" REF
C
(USE NEW-SUB-C-209-XX.X-X-1)
-2: 95.5% TIN/3.8% SILVER/.7%
COPPER CHARGE TAIL
*
= NOT TOOLED
= 10 POSITION ONLY AVAILABLE IN 4 ROW.
= ONLY AVAILABLE WITH -05.0 BODY HEIGHT,
-10 ROW.
.040 1.02 REF
(USE NEW-SUB-C-209-XX.X-X-2)
.050 1.27 REF
.050 1.27 (TYP)
= ONLY AVAILABLE WITH -05.0 AND -06.5
BODY HEIGHT AND 4 ROW.
"C" SPCS. @ .0500= "D"
** = ONLY AVAILABLE WITH -06.5 BODY HEIGHT,
AND -06 ROW.
C
*** = ONLY AVAILABLE WITH 30 POS & 4 ROW.
**** = ONLY AVAILABLE WITH -05.0 BODY HEIGHT,
-04, -06, -08 & -10 ROW.
.044 1.12
REF
.034 0.86 REF
***** = NOT RELEASED FOR PRODUCTION.
"G" REF
.044 1.12 REF
"E" REF
FIG 1
-08: 8 ROW
(SEAF-20-05.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
C
2. MINIMUM PUSHOUT FORCE: 0.50 LBS.
3. NOTE DELETED.
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH - DIM .321 [8.15], (SEE SHEET 3, FIG. 5).
5. WHEN APPLICABLE, DIMENSION C12 MUST BE MEASURED USING INSPECTION FIXTURE AT-1817-836-1
FOR -04 ROW, OR AT-1817-836-2 FOR -06, -08 & -10 ROW. USE CO-AU-WI-2003-M FOR PROCESS.
6. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF REVISION Y.
7. K-DOT WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
8. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.
9. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES OF 50 - 124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
SPLICES MAY BE PRESENT.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
10. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.
11. SOLDER CHARGE VOLUME IS .00000891 CUBIC INCHES (REF).
12. FOR VITA REQUIREMENTS, -A PIN SHOULD NOT BE ORDERED.
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
13. SLOT ORIENTATION MUST BE AS SHOWN.
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
14. A-PINS STANDARD ON ALL BODIES, EXCEPT 6 x 19, SEE SHEET 1, FIG. 1
A-PINS ARE OPTIONAL ON 6 x 19, SEE SHEET 4, FIG. 7
INSULATOR: LCP, COLOR: BLACK
CONTACT : COPPER ALLOY
.050 PITCH SOCKET ARRAY ASSEMBLY
DWG. NO.
C
15. MAXIMUM ROW TO ROW VARIATION .003[0.08], MEASURED FIRST & LAST POSITIONS ONLY, ALL ROWS.
16. NOTE DELETED.
17. NON-FUNCTIONAL VOIDING IN PLASTIC BODY TO BE AT SAMTEC'S DISCRETION.
18. THESE OPTIONS AVAILABLE AS ASO (APPLICATION SPECIFIC OPTIONS) ONLY. PLEASE CONTACT SAMTEC
FOR MORE INFORMATION.
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 05/27/2004 SHEET 1 OF 5
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
C
REVISION BM
.035 0.90
REF
.035±.005 0.89±0.13 (TYP)
.017 0.42
REF
C
L
C
.002±.003 0.05±0.08
(SEE NOTES 5 & 15)
'B'
C
NEW-SUB-C-209-XX.X-X-X
SOLDER CHARGE
SEE TABLE 6
"K" REF
DETAIL 'C'
SCALE 6 : 1
.050 1.27 REF (TYP)
C
C
L
L
SECTION "A"-"A"
SCALE 6 : 1
FIG 2
-10: 10 ROW
C
"J"
C
(SAME AS FIG 1, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-10-1-A-XX-K-TR SHOWN)
"H" (TYP)
(SEE TABLE 7)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
.100 2.54
REF (TYP)
10
.0175±.0030 0.445±0.076
C
DETAIL 'B'
SCALE 8 : 1
.523 13.28 .461 11.71
.300 7.62
REF
C
L
REF
REF
01
SEAF-XX-XX.X-10-A
"N" .020[0.51]
C
**
"L"
DOT APPLICATOR-KAPTON TAPE: USE
-04 ROW: K-DOT-.256-.375-.005
-04 ROW ONLY
FIG 3
(SAME AS FIG 3, EXCEPT AS SHOWN)
-K: POLYIMIDE PAD
(SEAF-20-05.0-XX-08-1-A-XX-K-TR SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
C
L
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
"N" .020[0.51]
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
C
L
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH SOCKET ARRAY ASSEMBLY
"L"
"M" .020[0.51]
DWG. NO.
DOT APPLICATOR-KAPTON TAPE: USE
-05/-06 ROW: K-DOT-.256-.375-.005
-08 ROW: K-DOT-.325-.450-.005
-10 ROW: K-DOT-.404-.500-.005
"F"
(INCLUDES K-DOT)
C
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 05/27/2004 SHEET 2 OF 5
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
REVISION BM
FIG 4
-06: 6 ROW
(SAME AS FIG 1, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-06-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
C
L
.050 1.27
REF (TYP)
06
.323 8.20
.261 6.63
C
L
REF
REF
.100 2.54 REF
-01
SEAF-XX-XX.X-06-X-A
"A" REF
.050 1.27
REF (TYP)
05
01
.258 6.55 REF
(NON-SYM)
C
L
.323 8.20 REF
.100 2.54 REF
SEAF-XX-XX.X-05-X-A
"D"
"D"
.323 8.20 REF
(SEE NOTE 4)
C
L
.025 0.64
(SEE NOTE 4)
.075 1.91
(SEE NOTE 4)
SECTION "D"-"D"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
C
DESCRIPTION:
FIG 5
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
DWG. NO.
-05: 5 ROW
(SAME AS FIG 4, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-05-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 05/27/2004 SHEET 3 OF 5
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
.324 8.23
REF
FIG 7
REVISION BM
06 ROW x 19 POS.
.105 2.67
REF
(SEE NOTE 12)
(ONLY AVAILABLE -06.5 LEADSTYLE & -06 ROW)
(SEAF-20-06.5-XX-06-1-XX-K-TR SHOWN)
(SAME AS FIGS 1 & 4 EXCEPT AS SHOWN )
(SOME CENTER FEATURES REMOVED FOR CLARITY)
06
WT-69-01-T
.070 1.78
(TYP)
SEE NOTE 13
C
C
C
L
FIG 9
*****-RP OPTION
(SEAF-20-05.0-XX-06-1-A-RP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 7 EXCEPT AS SHOWN )
01
(-RP OPTION VALID FOR SEAR MATE ONLY)
(ONLY AVAILABLE WITH -05.0 LEAD STYLE 6, 8 & 10 ROW)
"A" REF.
.190 4.83
REF
.304 7.72
.070 1.78
REF
REF
.258 6.55 REF
NEW-SUB-C-209-06.5-X-X
.010 0.25
(TYP)
WT-69-02-N
C
SEAF-XX-05.0-XX-A-LP
FIG 10
SEE OPTIONS
06
01
-PP OPTION
(SEAF-20-05.0-XX-06-1-A-PP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 7 EXCEPT AS SHOWN )
.323 8.20
REF
C
.221 5.61 REF
(-PP OPTION VALID FOR SEAR MATE ONLY)
L
(ONLY AVAILABLE WITH -05.0 LEAD STYLE 6, 8 & 10 ROW)
"P" REF
C
"Q" +.005
C
L
WT-43-01-T
-.010
.610 15.49
REF
.186 4.72 (TYP)
C
.117 2.97
REF (TYP)
PROPRIETARY NOTE
.070 1.78 (TYP)
"R"±.005
.117 2.97 REF (TYP)
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
FIG 8
-LP OPTION
(SEAF-20-05.0-XX-06-1-A-LP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 6 EXCEPT AS SHOWN )
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
DWG. NO.
(-LP OPTION REQUIRED FOR SEAC MATE ONLY)
(ONLY AVAILABLE WITH -05.0 LEAD STYLE -04, -06, -08 & -10 ROW)
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY: BRATCHER
05/27/2004 SHEET 4 OF 5
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
REVISION BM
.223 5.66
04
REF
.100 2.54 REF
.161 4.09
REF
C
L
.050 1.27 REF
01
.076 1.93 REF
"F"
"F"
.053 1.35 REF
.035 0.90 REF
.229 5.82
REF
.297 7.54
REF
NEW-SUB-C-209-07.5-X-X
SECTION "F"-"F"
FIG 11
-04: 4 ROW
(SEAF-30-07.5-XX-04-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 1 EXCEPT AS SHOWN )
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
DWG. NO.
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 05/27/2004 SHEET 5 OF 5
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
相关型号：
SEAF-40-05.0-L-10-2-A-K-TR
Board Stacking Connector, 400 Contact(s), 10 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
SEAF-40-05.0-L-10-2-A-LP-K-TR
Board Stacking Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator, ROHS COMPLIANT
SAMTEC
SEAF-40-05.0-L-10-2-A-PP-K-TR
Board Stacking Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator,
SAMTEC
SEAF-40-05.0-L-10-3-A
Board Stacking Connector, 400 Contact(s), 10 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SEAF-40-05.0-L-10-4-A
Board Stacking Connector, 400 Contact(s), 10 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SEAF-40-05.0-L-10-4-A-LP-K-TR
Board Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator
SAMTEC
SEAF-40-05.0-L-10-4-A-PP-K-TR
Board Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator
SAMTEC
SEAF-40-05.0-L-10-4-A-RP-K-TR
Board Connector, 400 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator
SAMTEC
SEAF-40-05.0-S-04-1
Board Stacking Connector, 160 Contact(s), 4 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SEAF-40-05.0-S-04-1-A
Board Stacking Connector, 160 Contact(s), 4 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SEAF-40-05.0-S-04-2
Board Stacking Connector, 160 Contact(s), 4 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明