SEAM-30-07.0-S-05 [SAMTEC]
Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | SEAM-30-07.0-S-05 |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal, 连接器 |
| 文件： | 总7页 (文件大小：2189K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
REVISION AC
SEAM-XX-XX.X-XX-XX-X-XX
2. MINIMUM PUSHOUT FORCE: 0.75 LBS.
No OF POSITIONS
OPTION
3. PARTS TO BE PACKAGED IN TRAYS (UNLESS -TR OPTION IS SELECTED).
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH
(.378[9.60]); SEE FIG. 7, SHEET 4.
***-10,*****-15,****-19 -20, ******-25, -30, -40, -50
-A: ALIGNMENT PIN
FIG. 1
(PER ROW)
(SEE FIG. 3, SHT 2)
LEAD STYLE
-08: 8 ROW
(NOT AVAILABLE WITH -19 POSITION)
-K: KAPTON PAD
5. C18 TO BE INSPECTED OPTICALLY WHILE FOCUSED ON THIS SURFACE.
6. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS.
-02.0 (SEE TABLE 1&2)
(SEAM-30-02.0-XX-08-1 SHOWN)
XX -03.0(SEE TABLE 1&2)
-03.5(SEE TABLE 1&2)
AC
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
(SEE FIG. 4, SHT 2)
"A"
REF
DOT APPLICATOR-KAPTON TAPE.
-04 ROW: USE K-DOT-.138-.250-.005
-05/-06 ROW: USE K-DOT-.236-.343-.005
-08 ROW: USE K-DOT-.325-.450-.005
-10 ROW: USE K-DOT-.404-.500-.005
-TR: TAPE & REEL
**
-06.5 (SEE TABLE 9 &10)
-07.0 (SEE TABLE 9 &10)
-09.0 (SEE TABLE 9 &10)
-11.0 (SEE TABLE 9 &10)
-13.0 (SEE TABLE 9 &10)
DO NOT
SCALE FROM
THIS PRINT
C
.123 3.12
REF
"B"
*
PIN 01
.0500 1.270 (TYP)
"H"
PLATING SPECIFICATION
-L: LIGHT GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
**-GP: GUIDE POST
"A"
(SEE FIG. 8, SHT 5)
C
REF (TYP)
C
L
(ONLY AVAILABLE WITH -02.0 LEAD
STYLE, 4 & 6 ROW, 20, 30, 40, &
50 POSITION)
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-L-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-L-X)
**-04: DIFF PAIR, (SEE FIG. 9, SHT 6)
(ONLY AVAILABLE IN
"E"
'F"
"G"
REF
-SM: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
10 ROW, 30 POSITION)
C
L
**-08: DIFF PAIR, (SEE FIG. 10, SHT 6)
(ONLY AVAILABLE IN
(REF) (REF)
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
10 ROW, 30 POSITION)
**-12: DIFF PAIR, (SEE FIG. 11, SHT 6)
(ONLY AVAILABLE IN
.060 1.52
10 ROW, 30 POSITION)
-S: SELECTIVE GOLD IN CONTACT
**-16: DIFF PAIR, (SEE FIG. 12, SHT 6)
(ONLY AVAILABLE IN
"A"
"C"
(REF)
REF
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
PIN 08
10 ROW, 30 POSITION)
'B'
.035 0.89 REF
SOLDER COMPOSITION & STYLE
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
SEAM-XX-XX.X-8
-1: 63% TIN / 37% LEAD
CHARGE TAIL
ROW
(USE SUB-T-1M3X-XX.X-X-1)
-2: 95.5% TIN / 3.8% SILVER /
.7% COPPER CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-2)
-04: 4 ROWS (SEE FIG 13, SHT 7)
(NOT AVAILABLE IN -13.0 LEAD STYLE)
-05: 5 ROWS (SEE FIG. 7, SHT 4)
(**-07.0, **-09.0, **-11.0 &
"J" REF
.040 1.02
REF
*-13.0 LEAD STYLES: -20, -30, -40, & -50 POSITIONS)
-06: 6 ROWS (SEE FIG. 6, SHT 4)
(**-07.0, **-09.0, **-11.0, & *-13.0 LEAD STYLES: -20,
-30, -40, & -50 POSITIONS)
.050 1.27 (TYP)
C
L
C
C
-08: 8 ROWS (SEE FIG. 1)
-10: 10 ROWS
"D" (TYP)
(SEE FIG. 2, SHT 2)
C
C
L
L
XX
= NOT TOOLED FOR -05 & -06 ROWS
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
*** = 10 POSITION ONLY AVAILABLE
IN 4 ROW
**** = ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 6 ROW
***** = ONLY AVAILABLE IN A 10 ROW
= ONLY AVAILABLE IN 8 & 10 ROW
****** = ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 4 ROW
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
PATENT NUMBER
7172438
C
"T"
(SEE NOTE 6)
(SEE SHEET 3 FOR LEAD STYLES -07.0 THRU -13.0)
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
"U"
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
DETAIL 'B'
SCALE 7 : 1
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.004 0.10
(SEE NOTE 6)
INSULATOR: L.C.P., COLOR: BLACK
TERMINAL: COPPER ALLOY
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWGS. EAM-XX-XX.X-XX-XX-X-XX
BY:
BRATCHER 06/02/2004 SHEET 1 OF 7
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
C
FIG. 2
REVISION AC
+.002
+0.05
1.42
-0.10
(TYP)
.056
.011 0.28
REF
-.004
-10: 10 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-10-1 SHOWN)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
C
L
PIN 01
C
L
"H"
.028 0.72
REF (TYP)
REF
"E"
REF
"F"
REF
"G"
REF
SOLDER CHARGE
SUB-T-1M36-XX.X-X-X
.050 1.27 REF
C
L
.016±.003 0.40±0.08
(TYP)
C
.044 1.12 (TYP)
.056±.003 1.42±0.08
C
PIN 10
SECTION "A"-"A"
SCALE 4 : 1
FIG. 3
FIG. 4
-A: ALIGNMENT PINS OPTION
APPLIES TO ALL -A OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-08-1-A SHOWN)
-K: KAPTON PAD OPTION
(SEAM-30-02.0-XX-08-1-K SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(ALL CONTACTS NOT SHOWN FOR CLARITY)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
C
L
"S" .020[0.51]
.050 1.27
REF
.040 1.02
REF
C
L
.044 1.12
.034 0.86
"K"
(REF)
'C'
"N"
"M" .020[0.51]
"L"
(INCL. POLYIMIDE FILM)
"M"=(("A"(SEE TABLE 3)-"N")/2)+.020
"T" REF
C
L
.034 0.86
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
.044 1.12 REF
DETAIL 'C'
SCALE 4 : 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.044 1.12 REF
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
.034 0.86
DETAIL 'C'
ALTERNATE CONSTRUCTION
NO.
DWGS. EAM-XX-XX.X-XX-XX-X-XX
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 2 OF 7
.0088±.0008 0.224±0.020
FIG. 5
REVISION AC
C
-06.5 THRU -13.0 LEAD STYLES
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.007 0.18
REF
(SEAM-30-09.0-XX-08-X-X SHOWN)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
"A"
(REF)
'H'
C
"B"
C
.050 1.27
PIN 01
"H"
(REF) (TYP)
-07.0 LEAD STYLE
(SEAM-XX-07.0-X-08-A-X SHOWN)
DETAIL 'H'
SCALE 16 : 1
"F"
(REF)
"G"
(REF)
"R"
(REF)
C
L
C
L
PIN 08
"C" (REF)
SEAM-30-00.1-XX-X
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
"Q"
(REF)
SEAM-S-30-XX.X-XX-X
.050 1.27
C
SUB-T-1M38-XX.X-X-X
C
L
C
"D" (TYP)
C
C
L
L
SEAM-S-XX-XX.X-08-X
SEAM-XX-00.1-X
'D'
+.002
-.003
+0.05
.053
1.35
-0.08
.028 0.72
C
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
"P"
.011 0.28
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
C
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
SEE NOTE 5
.056 1.42
.050 1.27 (REF)
DESCRIPTION:
C C
C
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
L
L
.050 PITCH TERMINAL ARRAY ASSEMBLY
.055±.002 1.41±0.05
.044 1.12 (TYP)
C
SNEOA. M-XX-XX.X-XX-XX-X-XX
DWG.
.016±.003 0.41±0.08
TYP
DETAIL 'D'
SCALE 8 : 1
SCALE 3.5:1
BY:
BRATCHER 06/02/2004 SHEET 3 OF 7
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
REVISION AC
PIN 01
C
L
FIG. 6
-06: 6 ROWS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-X-A SHOWN)
(**-07.0, **-09.0, **-11.0, & *-13.0 LEAD STYLES: -20, -30, -40, & -50 POSITIONS)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.030 0.76 REF
.040 1.02 REF
PIN 06
SEAM-XX-XX.X-06-X
FIG. 7
-05: 5 ROWS
(SAME AS FIG. 6, EXCEPT AS SHOWN)
PIN 01
C
L
(SEAM-20-02.0-XX-05-X-A SHOWN)
(**-07.0, **-09.0, **-11.0 & *-13.0 LEAD STYLES: -20, -30, -40, & -50 POSITIONS)
(SEE NOTE 4)
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.378 9.60 REF
(SEE NOTE 4)
.030 0.76 REF
.040 1.02 REF
PIN 05
SEAM-XX-XX.X-05-X
"F"
"F"
.072 1.83
(SEE NOTE 4)
.128 3.25
(SEE NOTE 4)
SECTION "F"-"F"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
DWG. NO.
SEAM-XX-XX.X-XX-XX-X-XX
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 4 OF 7
FIG. 8
REVISION AC
**-GP: GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 LEAD STYLE, 4 & 6 ROW, 20, 30, 40, & 50 POSITIONS)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-2-A-GP SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
** = NOT RELEASED FOR PRODUCTION
"V" REF
.218 5.54
REF
SEAM-XX-02.0-XX-X-GP
C
2
MAX SWAY
(TYP)
.120 3.05
REF
WT-42-01-T
.320 8.13
REF
.498 12.65
REF
C
"W"
.020 0.51 SQ. REF (TYP)
.117 2.97 SQ. REF (TYP)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 5 OF 7
FIG. 10
FIG. 9
REVISION AC
-10: 10 ROW
-10: 10 ROW
(SEAM-30-02.0-XX-10-2-08 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48 & 49
(SEAM-30-02.0-XX-10-2-04 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28 & 29
PIN 1
PIN 1
PIN 10
PIN 10
FIG. 12
-10: 10 ROW
FIG. 11
(SEAM-30-02.0-XX-10-2-16 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48, 49,
52, 53, 56, 57, 64, 65, 68, 69,
72, 73, 76, 77, 84, 85, 88 & 89
-10: 10 ROW
(SEAM-30-02.0-XX-10-2-12 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48, 49
52, 53, 56, 57, 64, 65, 68 & 69
PIN 1
PIN 1
'G'
PIN 10
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
OMITTED
PIN 10
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DETAIL 'G'
SCALE 5 : 1
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
FILLED
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 6 OF 7
REVISION AC
FIG. 13
-04: 4 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-04-1-A SHOWN)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
PIN 1
"E"
REF
"F"
REF
"G"
REF
"H" REF
PIN 4
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE:4:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
c:\enterprisevault\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 7 OF 7
相关型号：
SEAM-30-07.0-S-05-1-A
Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-05-2-A
Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-05-2-A-K
Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
SAMTEC
SEAM-30-07.0-S-05-2-A-K-TR
Board Stacking Connector, 150 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-30-07.0-S-05-A-K-TR
Board Stacking Connector, 150 Contact(s), 5 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-30-07.0-S-06-1-A
Board Stacking Connector, 180 Contact(s), 6 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-06-2-A
Board Stacking Connector, 180 Contact(s), 6 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-08
Board Stacking Connector, 240 Contact(s), 8 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-08-1-A
Board Stacking Connector, 240 Contact(s), 8 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-08-1-TR
Board Stacking Connector, 240 Contact(s), 8 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-08-2
Board Stacking Connector, 240 Contact(s), 8 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明