SEAM-30-07.0-S-10-1 [SAMTEC]
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | SEAM-30-07.0-S-10-1 |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal, PC 连接器 |
| 文件： | 总7页 (文件大小：2112K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
SEAM-XX-XX.X-XX-XX-X-XX
2. MINIMUM PUSHOUT FORCE: 0.75 LBS.
3. PARTS TO BE PACKAGED IN TRAYS (UNLESS -TR OPTION IS SELECTED).
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH
(.378[9.60]); SEE FIG. 7, SHEET 4.
No OF POSITIONS
***-10, -20, -30, -40, -50
(PER ROW)
OPTION
-A: ALIGNMENT PIN
FIG. 1
-08: 8 ROW
(SEE FIG. 3, SHT 2)
5. C15 TO BE INSPECTED OPTICALLY WHILE FOCUSED ON THIS SURFACE.
6. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS.
-K: KAPTON PAD
(SEAM-30-02.0-XX-08-1 SHOWN)
(HAND PLACE: USE K-850-650)
(SEE FIG. 4, SHT 2)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
LEAD STYLE
"A"
-02.0 (SEE TABLE 1&2)
* -03.0(SEE TABLE 1&2)
-03.5(SEE TABLE 1&2)
-07.0 (SEE TABLE 9 &10)
-09.0 (SEE TABLE 9 &10)
-11.0 (SEE TABLE 9 &10)
* -13.0 (SEE TABLE 9 &10)
DOT APPLICATOR-KAPTON TAPE.
-05/-06 ROW USE K-DOT-.236-.343-.005
-08 ROW USE K-DOT-.325-.450-.005
-10 ROW USE K-DOT-.404-.500-.005
-TR: TAPE & REEL
REF
DO NOT
SCALE FROM
THIS PRINT
C1
.123 3.12
REF
"B"
PIN 01
.0500 1.270 (TYP) C2
"H"
REF (TYP)
**-GP: GUIDE POST
(SEE FIG. 8, SHT 5)
"A"
C
L
(ONLY AVAILIBLE WITH
6 ROW 30 POS)
**-04: DIFF PAIR, (SEE FIG. 9, SHT 6)
(ONLY AVAILABLE IN
PLATING SPECIFICATION
-SM: SELECTIVE GOLD IN CONTACT
10 ROW, 30 POSITION)
AREA, MATTE TIN ON TAIL
**-08: DIFF PAIR, (SEE FIG. 10, SHT 6)
(ONLY AVAILABLE IN
"E"
'F"
"G"
REF
C
L
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
-(LEAD STYLE -07.0 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
(REF) (REF)
10 ROW, 30 POSITION)
**-12: DIFF PAIR, (SEE FIG. 11, SHT 6)
(ONLY AVAILABLE IN
10 ROW, 30 POSITION)
**-16: DIFF PAIR, (SEE FIG. 12, SHT 6)
(ONLY AVAILABLE IN
-S: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
.060 1.52
"A"
PIN 08
"C"
(REF)
REF
10 ROW, 30 POSITION)
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
-(LEAD STYLE -07.0 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
'B'
.035 0.89 REF
SOLDER COMPOSITION & STYLE
SEAM-XX-XX.X-8
-1: 63% TIN / 37% LEAD
CHARGE TAIL
ROW
(USE SUB-T-1M3X-XX.X-X-1)
-2: 95.5% TIN / 3.8% SILVER /
.7% COPPER CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-2)
**-04: 4 ROWS(SEE FIG 13, SHT 7)
(NOT AVAILABLE IN LEAD STYLES -03.0 OR -13.0)
-05: 5 ROWS (SEE FIG. 7, SHT 4)
(-02.0 LEAD STYLE ONLY)
-06: 6 ROWS (SEE FIG. 6, SHT 4)
(-02.0 LEAD STYLE ONLY)
(-20 & -30 POS ONLY)
"J" REF
.040 1.02
REF
C3
.050 1.27 (TYP)
-08: 8 ROWS (SEE FIG. 1)
C
L
-10: 10 ROWS
C4
(SEE FIG. 2, SHT 2)
"D" (TYP)
* = NOT TOOLED
C
C
L
L
** = NOT RELEASED FOR PRODUCTION
*** = 10 POSITION ONLY AVAILABLE IN 4 ROW
PATENT NUMBER
7172438
* = NOT TOOLED
Q
** = NOT RELEASED FOR PRODUCTION
(SEE SHEET 3 FOR LEAD STYLES -07.0 THRU -13.0)
* = NOT TOOLED
(SEE SHEET 3 FOR LEAD STYLES -07.0 THRU -13.0)
** = NOT RELEASED FOR PRODUCTION
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
C6
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [.13]
"T" REF
"U"
.XXXX: .0020 [.051]
Q
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: L.C.P., COLOR: BLACK
TERMINAL: COPPER ALLOY
C5
.050 PITCH TERMINAL ARRAY ASSEMBLY
.0020 0.051
(SEE NOTE 6)
NO.
DWGS. EAM-XX-XX.X-XX-XX-X-XX
DETAIL 'B'
SCALE 7 : 1
.004 0.10 REF
BY:
BRATCHER 06/02/2004 SHEET 1 OF 7
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
FIG. 2
-10: 10 ROW
REVISION Q
C7
.056±.002 1.42±0.05
(TYP)
.011 0.28
REF
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-10-1 SHOWN)
C
L
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
PIN 01
C
L
"H"
REF (TYP)
.028 0.72
REF
"E"
REF
"F"
REF
"G"
REF
C
L
SOLDER CHARGE
SUB-T-1M36-XX.X-X-X
.050 1.27 REF
C8
.016±.003 0.40±0.08
(TYP)
.044 1.12 (TYP)
PIN 10
.056±.003 1.42±0.08
C9
SECTION "A"-"A"
SCALE 4 : 1
FIG. 3
FIG. 4
-K: KAPTON PAD OPTION
(SEAM-30-02.0-XX-08-1-K SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(ALL CONTACTS NOT SHOWN FOR CLARITY)
-A: ALIGNMENT PINS OPTION
APPLIES TO ALL -A OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-08-1-A SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
C
L
"S" .020[0.51]
.050 1.27
REF
.040 1.02
REF
C
L
.044 1.12
.034 0.86
"K"
(REF)
'C'
"N"
"M" .020[0.51]
"L"
(INCL. POLYAMIDE FILM)
"M"=(("A"(SEE TABLE 3)-"N")/2)+.020
"T" REF
C
L
* = NOT TOOLED
** = NOT RELEASED FOR PRODUCTION
Q
.034 0.86
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
.044 1.12 REF
** = NOT RELEASED FOR PRODUCTION
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DETAIL 'C'
SCALE 4 : 1
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWGS. EAM-XX-XX.X-XX-XX-X-XX
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 2 OF 7
FIG. 5
.0088±.0008 0.224±0.020
Q
REVISION Q
-07.0 THRU -13.0 LEAD STYLES
(SAME AS FIG. 1, EXCEPT AS SHOWN)
C19
(SEAM-30-09.0-XX-08-X-X SHOWN)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
.007 0.18
REF
"A"
(REF)
C10
'H'
"B"
C11
.050 1.27
PIN 01
"H"
(REF) (TYP)
-07.0 LEAD STYLE
DETAIL 'H'
SCALE 16 : 1
FIG. 13
(IN-PROCESS VIEW)
(SEAM-XX-07.0-X-08-A-X SHOWN)
"F"
(REF)
"G"
(REF)
"R"
(REF)
C
L
SEAM-XX-00.1-X
'D'
SEAM-S-XX-XX.X-08-X
C
L
PIN 08
"C" (REF)
SEAM-30-00.1-XX-X
C14
"P"
"Q"
(REF)
C16
.056 1.42
.050 1.27 (REF)
SEAM-S-30-XX.X-XX-X
.016±.003 0.41±0.08
TYP
C17
Q
C C
L L
.044 1.12 (TYP)
SUB-T-1M38-XX.X-X-X
C12
.050 1.27
SCALE 3.5:1
C
L
C13
"D" (TYP)
C
C
L
L
Q
+.002
-.003
+0.05
-0.08
.053
1.35
.028 0.72
Q
Q
* = NOT TOOLED ** = NOT RELEASED FOR PRODUCTION
.011 0.28
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
SEE NOTE 5
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
.055±.002 1.41±0.05
Q
DWG.
SNEOA. M-XX-XX.X-XX-XX-X-XX
C18
DETAIL 'D'
SCALE 8 : 1
* = NOT TOOLED
BY:
BRATCHER 06/02/2004 SHEET 3 OF 7
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
REVISION Q
PIN 01
FIG. 6
C
L
-06: 6 ROWS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-X-A SHOWN)
(-02.0 LEAD STYLE ONLY)(-20 & -30 POS ONLY)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.030 0.76 REF
.040 1.02 REF
PIN 06
SEAM-XX-XX.X-06-X
PIN 01
C
L
FIG. 7
-05: 5 ROWS
(SAME AS FIG. 6, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-05-X-A SHOWN)
(-02.0 LEAD STYLE ONLY)
(SEE NOTE 4)
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.030 0.76 REF
.040 1.02 REF
PIN 05
.378 9.60 REF
(SEE NOTE 4)
SEAM-XX-XX.X-05-X
"F"
"F"
.072 1.83
(SEE NOTE 4)
.128 3.25
(SEE NOTE 4)
SECTION "F"-"F"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
DWG. NO.
SEAM-XX-XX.X-XX-XX-X-XX
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 4 OF 7
REVISION Q
FIG. 8
-GP: GUIDE POST OPTION
APPLIES TO ALL -GP OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-06-2-A-GP SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
C20
2
MAX SWAY
(TYP)
T-1R34-01-T
.120 3.05
REF
.324 8.22
REF
.480 12.19
REF
.062 1.57
REF
C21
2.033±.002 51.64±0.05
(BOTTOM SIDE)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 5 OF 7
FIG. 10
FIG. 9
-10: 10 ROW
REVISION Q
-10: 10 ROW
(SEAM-30-02.0-XX-10-2-08 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48 & 49
(SEAM-30-02.0-XX-10-2-04 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28 & 29
PIN 1
PIN 1
PIN 10
PIN 10
FIG. 12
-10: 10 ROW
FIG. 11
(SEAM-30-02.0-XX-10-2-16 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48, 49,
52, 53, 56, 57, 64, 65, 68, 69,
72, 73, 76, 77, 84, 85, 88 & 89
-10: 10 ROW
(SEAM-30-02.0-XX-10-2-12 SHOWN)
PINS OMITTED 12, 13, 16, 17, 24, 25, 28, 29
32, 33, 36, 37, 44, 45, 48, 49
52, 53, 56, 57, 64, 65, 68 & 69
PIN 1
PIN 1
'G'
PIN 10
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
OMITTED
PIN 10
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DETAIL 'G'
SCALE 5 : 1
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
FILLED
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 6 OF 7
FIG. 13
-04: 4 ROW
REVISION Q
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-04-1-A SHOWN)
(SOME CENTER FEATURES NOT SHOWN FOR CLARITY)
PIN 1
"E"
REF
"F"
REF
"G"
REF
"H" REF
PIN 4
NOT RELEASED FOR PRODUCTION
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE:4:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DWSG.EAM-XX-XX.X-XX-XX-X-XX
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-XX-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 7 OF 7
相关型号：
SEAM-30-07.0-S-10-1-08
Board Stacking Connector, 284 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-1-12
Board Stacking Connector, 276 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-1-16
Board Stacking Connector, 268 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-1-A
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-1-K
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-1-TR
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-2-04
Board Stacking Connector, 292 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-2-08
Board Stacking Connector, 284 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-2-16
Board Stacking Connector, 268 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-30-07.0-S-10-2-A
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle,
SAMTEC
SEAM-30-07.0-S-10-2-A-K
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
SAMTEC
SEAM-30-07.0-S-10-2-K
Board Stacking Connector, 300 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明