SEAM-50-07.0-L-04-2-A [SAMTEC]
Board Stacking Connector, 200 Contact(s), 4 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | SEAM-50-07.0-L-04-2-A |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 200 Contact(s), 4 Row(s), Male, Straight, Surface Mount Terminal, |
| 文件： | 总6页 (文件大小：1749K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FIG. 1
PATENT NUMBER
7172438
REVISION AN
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
-08: 8 ROW
TAPE & REEL
(SEE NOTES 9, 10 & 11)
No OF POSITIONS
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
***-10,*****-15,****-19 -20,
******-25, -30, -40, -50
(PER ROW)
POLYIMIDE PAD
(SEE FIG. 4, SHT 2)
"A"
REF
(SEE NOTE 8)
LEAD STYLE
-02.0 (SEE TABLE 1&2)
DOT APPLICATOR-KAPTON TAPE.
-04 ROW: USE K-DOT-.138-.250-.005
-05/-06 ROW: USE K-DOT-.236-.343-.005
-08 ROW: USE K-DOT-.325-.450-.005
-10 ROW: USE K-DOT-.404-.500-.005
C
.123 3.12
REF
"B"
-03.0(SEE TABLE 1&2)
-03.5(SEE TABLE 1&2)
-06.5 (SEE TABLE 9 &10)
-07.0 (SEE TABLE 9 &10)
-09.0 (SEE TABLE 9 &10)
-11.0 (SEE TABLE 9 &10)
-13.0 (SEE TABLE 9 &10)
PIN 01
.0500 1.270 (TYP)
"H"
"A"
C
C
REF (TYP)
L
OPTION
-GP: GUIDE POST
*
(SEE FIG. 8, SHT 5)
(ONLY AVAILABLE WITH -02.0 LEAD
STYLE, 4 & 6 ROW, 20, 30, 40, &
50 POSITION)
PLATING SPECIFICATION
-L: LIGHT GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-L-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-L-X)
-SM: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X
"E"
'F"
"G"
REF
C
L
**-EP: EXTENDED GUIDE POST
(SEE FIG. 10, SHT 5)
(REF) (REF)
(ONLY AVAILABLE WITH -02.0& -03.5
LEAD STYLE, 20, 30, 40, & 50 POSITION)
.060 1.52
"A"
PIN 08
"C"
(REF)
REF
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X))
-S: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
.035 0.89 REF
SEAM-XX-XX.X-8
ALIGNMENT PIN
(SEE FIG. 3, SHT 2)
"J" REF
.040 1.02
REF
(NOT AVAILABLE WITH -19 POSITION)
(SEE NOTE 7)
ROW
SOLDER COMPOSITION & STYLE
.050 1.27 (TYP)
'B'
C
-04: 4 ROWS (SEE FIG 13, SHT 6)
(NOT AVAILABLE IN -13.0 LEAD STYLE)
-05: 5 ROWS (SEE FIG. 7, SHT 4)
-06: 6 ROWS (SEE FIG. 6, SHT 4)
-08: 8 ROWS (SEE FIG. 1)
-10: 10 ROWS
C
-1: 63% TIN / 37% LEAD
C
L
CHARGE TAIL
"D" (TYP)
(USE SUB-T-1M3X-XX.X-X-1)
-2: 95.5% TIN / 3.8% SILVER /
.7% COPPER CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-2)
C
C
L
L
(SEE FIG. 2, SHT 2)
* = NOT TOOLED
AN
** = NOT RELEASED FOR PRODUCTION
*** = 10 POSITION ONLY AVAILABLE
IN 4 ROW
**** = ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 6 ROW
***** = ONLY AVAILABLE IN A 10 ROW
= ONLY AVAILABLE IN 8 & 10 ROW
* = NOT TOOLED
C
****** = ONLY AVAILABLE WITH -03.5 LEAD
"T"
(SEE NOTE 6)
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
STYLE & 4 ROW
C
"U"
.004 0.10
(SEE NOTE 6)
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
DETAIL 'B'
AN
SCALE 7 : 1
NOTES:
1.
C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 0.75 LBS.
3. NOTE DELETED.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH
(.378[9.60]); SEE FIG. 7, SHEET 4.
TOLERANCES ARE:
DECIMALS
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
5. C18 TO BE INSPECTED OPTICALLY WHILE FOCUSED ON THIS SURFACE.
6. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS.
7. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF
REVISION AD.
ANGLES
2
.XX: .01 [.3]
.XXX: .005 [.13]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
8. POLYIMIDE PAD WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.
9. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.
10. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL
BE SUPPLIED. FOR QUANTITIES 50 - 124, NO LEADER OR TRAILER WILL
BE SUPPLIED.
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, COLOR: BLACK
TERMINAL: COPPER ALLOY
.050 PITCH TERMINAL ARRAY ASSEMBLY
DWG. NO.
11. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.
12. SEE RECOMMENDED FOOTPRINT DRAWING FOR STENCIL
REQUIREMENTS.
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
13. SOLDER CHARGE VOLUME IS 0.891 x 10^-5 IN ^3 REF.
BY:
BRATCHER 06/02/2004 SHEET 1 OF 6
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
C
FIG. 2
REVISION AN
+.002
+0.05
1.42
-0.10
.056
.011 0.28
REF
-.004
-10: 10 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(TYP)
(SEAM-30-02.0-XX-10-1-A-XX-K-TR SHOWN)
C
L
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
PIN 01
C
L
"H"
.028 0.72
REF (TYP)
REF
"E"
REF
"F"
REF
"G"
REF
SOLDER CHARGE
SUB-T-1M36-XX.X-X-X
.050 1.27 REF
C
L
.016±.003 0.40±0.08
(TYP)
C
.044 1.12 (TYP)
.056±.003 1.42±0.08
PIN 10
C
FIG. 3
SECTION "A"-"A"
SCALE 4 : 1
-A: ALIGNMENT PINS
FIG. 4
APPLIES TO ALL -A OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
-K: POLYIMIDE PAD
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(ALL CONTACTS NOT SHOWN FOR CLARITY)
C
L
"S" .020[0.51]
.045 1.14
.050 1.27
REF
.040 1.02
REF (TYP)
REF
C
L
.044 1.12
.034 0.86
.044 1.12 REF (TYP)
"K"
(REF)
'C'
"N"
"M" .020[0.51]
"L"
(INCL. POLYIMIDE FILM)
"M"=(("A"(SEE TABLE 3)-"N")/2)+.020
"T" REF
C
L
.034 0.86
.044 1.12 REF
DETAIL 'C'
SCALE 4 : 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.044 1.12 REF
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
.034 0.86
DWG. NO.
* = NOT TOOLED
DETAIL 'C'
ALTERNATE CONSTRUCTION
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 2 OF 6
.0088±.0008 0.224±0.020
FIG. 5
REVISION AN
C
-06.5 THRU -13.0 LEAD STYLES
(SAME AS FIG. 1, EXCEPT AS SHOWN)
.007 0.18
REF
(SEAM-30-09.0-XX-08-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
"A"
(REF)
'H'
C
"B"
C
.050 1.27
PIN 01
"H"
(REF) (TYP)
-07.0 LEAD STYLE
(SEAM-XX-07.0-X-08-A-X SHOWN)
DETAIL 'H'
SCALE 16 : 1
"F"
(REF)
"G"
(REF)
"R"
(REF)
C
L
AN
C
L
PIN 08
"C" (REF)
SEAM-30-00.1-XX-X
* = NOT TOOLED
"Q"
(REF)
SEAM-S-30-XX.X-XX-X
.050 1.27
C
SUB-T-1M38-XX.X-X-X
C
L
C
"D" (TYP)
C
C
L
L
SEAM-S-XX-XX.X-08-X
SEAM-XX-00.1-X
'D'
+.002
-.003
+0.05
.053
1.35
-0.08
.028 0.72
C
* = NOT TOOLED
"P"
.011 0.28
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
C
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
SEE NOTE 5
.056 1.42
.050 1.27 (REF)
DESCRIPTION:
C C
C
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
L
L
.050 PITCH TERMINAL ARRAY ASSEMBLY
.055±.002 1.41±0.05
.044 1.12 (TYP)
C
DWG. NO.
.016±.003 0.41±0.08
TYP
DETAIL 'D'
SCALE 8 : 1
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
SCALE 3.5:1
BY:
BRATCHER 06/02/2004 SHEET 3 OF 6
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
REVISION AN
PIN 01
C
L
FIG. 6
-06: 6 ROWS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.030 0.76 REF
.040 1.02 REF
PIN 06
SEAM-XX-XX.X-06-X
FIG. 7
-05: 5 ROWS
(SAME AS FIG. 6, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-05-X-A-XX-K-TR SHOWN)
(SEE NOTE 4)
PIN 01
C
L
"H" REF (TYP)
"E"
REF
"F"
REF
C
L
"G" REF
.378 9.60 REF
(SEE NOTE 4)
.030 0.76 REF
.040 1.02 REF
PIN 05
SEAM-XX-XX.X-05-X
"F"
"F"
.072 1.83
(SEE NOTE 4)
.128 3.25
(SEE NOTE 4)
SECTION "F"-"F"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
NO.
DSWEG.AM-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 4 OF 6
FIG. 8
REVISION AN
FIG. 10
-GP: GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 LEAD STYLE, 4 & 6 ROW, 20, 30, 40, & 50 POSITIONS)
(MATES WITH SEAF RIGHT ANGLE ONLY)
-EP: EXTENDED GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 & -03.5 LEAD STYLES, 4 & 6 ROW,
20, 30, 40, & 50 POSITIONS)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SAME AS FIG. 8, EXCEPT AS SHOWN)
(SEAM-20-03.5-XX-06-2-A-EP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
(SEAM-20-02.0-XX-06-2-A-GP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
"V" REF
WT-58-XX-X
C
R.060 1.52
REF
.218 5.54
REF
"x"
"Y"
SEAM-XX-02.0-XX-X-GP
C
2
.120 3.05
REF
MAX SWAY
(TYP)
WT-42-01-T
C
.324 8.22
.320 8.13
SEAM-XX-03.5-XX-X-EP
REF
.498 12.65
REF
.010 0.25
REF
C
.070 1.78 REF
+.005
-.008
"W"
.020 0.51 SQ. REF (TYP)
.059 1.49
.285 7.24
REF
.117 2.97 SQ. REF (TYP)
.180 4.57
REF
2.246 57.05
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
DWG. NO.
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 5 OF 6
REVISION AN
FIG. 9
-04: 4 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-04-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
PIN 1
"E"
REF
"F"
REF
"G"
REF
"H" REF
PIN 4
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE:4:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
DWG. NO.
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004 SHEET 6 OF 6
相关型号：
SEAM-50-07.0-L-05-1-A
Board Stacking Connector, 250 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-50-07.0-L-05-2-A
Board Stacking Connector, 250 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-50-07.0-L-05-2-A-K
Board Stacking Connector, 250 Contact(s), 5 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-05-2-A-K-TR
Board Stacking Connector, 250 Contact(s), 5 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-05-A-K-TR
Board Stacking Connector, 250 Contact(s), 5 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-06-1-A
Board Stacking Connector, 300 Contact(s), 6 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-50-07.0-L-06-2-A-K-TR
Board Stacking Connector, 300 Contact(s), 6 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-06-A-K-TR
Board Stacking Connector, 300 Contact(s), 6 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-08-2-A-K
Board Stacking Connector, 400 Contact(s), 8 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-08-2-A-K-TR
Board Stacking Connector, 400 Contact(s), 8 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
SAMTEC
SEAM-50-07.0-L-10
Board Stacking Connector, 500 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
SEAM-50-07.0-L-10-2-A
Board Stacking Connector, 500 Contact(s), 10 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明