SFM-110-03-L-D-P [SAMTEC]
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,;
| 型号： | SFM-110-03-L-D-P |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket, |
| 文件： | 总4页 (文件大小：511K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION DS
ANY CHANGES MADE TO THIS PRINT MUST ALSO BE MADE TO THE SFC PRINT
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .5 LB.
SFM-1XX-XX-XXX-D-XXX
3. COPLANARITY: .004[0.10] = POS 05 THRU 26
.006[0.15] = POS 27 THRU 50
C
C
DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
OPTIONS
4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH
NOTCH GOING WITH ARROW.
(LEAVE BLANK FOR STANDARD
ALL POSITIONS AVAILABLE
-02 THRU -50
(USE BODY: SFM-XX-D-XX-X)
5. PINS CAN BE ORIENTED IN ANY DIRECTION;
BOTH ROWS MUST FACE SAME WAY.
AND USE SFM-XX-D)
-N: NO POLARIZATION NOTCH
(USE SFM-XX-D-XX-N)
6. SEE NOTCH FOR PROPER ORIENTATION.
7. MAXIMUM PIN HEIGHT VARIATION: .003[0.08]
FROM PIN TO PIN AND ROW TO ROW, MUST BE
MEASURED BETWEEN ADJACENT PINS.
8. DUE TO HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
9. DIMENSION TO BE MEASURED AT BEND.
-A: ALIGNMENT PIN (USE SFM-XX-D-A-X)
(SEE FIG 4, SHT 2)
LEAD STYLE
-LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8)
(AVAILABLE ON ALL LEADS)
-01: THROUGH HOLE
(USE CONTACT: C-44-01-XXX)
(SEE FIG 1, SHT 1)
-P: PICK AND PLACE PAD
(SEE FIG 5, SHT 2)
(AVAILABLE ON 5 THRU 50 POSITION ONLY)
-TR: TAPE & REEL (SEE SHT 4)
-02: SURFACE MOUNT
(USE CONTACT: C-44-02-XXX)
(SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -DS OPTION)
-K: POLYIMIDE FILM PAD (.005[0.13] THICKNESS)
(SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005)
-SN: SOLDER NAIL FOR .062 BOARD
(SFM-XX-D-SN AND WT-27-01-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
-SN2: SOLDER NAIL FOR .093 BOARD
(SFM-XX-D-SN AND WT-27-02-T)
(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)
(NOT AVAILABLE WITH -A & -LC)
-DS: DUAL SCREW DOWN FOR .062 BOARD
(SEE FIG 8, SHT 3)
-03: STRAIGHT MODIFIED
(USE CONTACT: C-44-03-XXX)
(SEE FIG 1, SHT 1)
*DIMENSIONS N/A FOR -N OPTION
*.145 3.68 REF
-L1: THROUGH HOLE (LOW INSERTION)
(USE CONTACT: C-61-01-XXX)
(SEE FIG 1, SHT 1)
-L2: SURFACE MOUNT (LOW INSERTION)
(USE CONTACT: C-61-02-XXX)
(SEE FIG 2, SHT 2)
-L3: STRAIGHT MODIFIED (LOW INSERTION)
(USE CONTACT: C-61-03-XXX)
(SEE FIG 1, SHT 1)
-T1: THROUGH HOLE (PHOS BRONZE)
(USE CONTACT: C-119-01-XXX)
(SEE FIG 1, SHT 1)
*.020 0.51 REF
.120 3.05 REF
*.080 2.03 REF
.050 1.27
REF
02
(ONLY AVAILABLE WITH -01, -02 AND -03 LEAD
STYLE)(NOT AVAILABLE WITH OPTIONS -N, -A,
-LC, -P, -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS,
CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T
ALWAYS FILLED)
C
L
-T2: SURFACE MOUNT (PHOS BRONZE)
(USE CONTACT: C-119-02-XXX)
(SEE FIG 2, SHT 2)
01
C
L
.050 1.27 REF
BODY SPECIFICATION
-D: DOUBLE ROW
(No OF POS x .050[1.27]) + .015[0.38] REF
(No OF POS x .050[1.27]) + .155[3.94] REF
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
C
L
MATTE TIN ON TAIL
SFM-XX-D-LC-X
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
"A"
"A"
C-XX-01-XXX
(SEE NOTE 5)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.180 4.57 REF
.015 0.38 REF
.110 2.79 REF
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
(ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
"A"
(SEE TABLE 1)
C
L
2
MAX SWAY
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(EITHER DIRECTION)
"B" REF
C
.050 1.27
.005 0.13 REF
(NO OF POS x .050[1.27]) - .050[1.27] REF
C
1
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
FIG 1
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THROUGH HOLE/STRAIGHT MODIFIED
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
INSULATOR: LCP UL 94V-O, COLOR: BLACK
CONTACT: TIGER EYE: BeCu
DWG. NO.
TIGER EYE LITE: PHOSPHOR BRONZE
SFM-1XX-XX-XXX-D-XXX
SHEET 1 OF
4
BY: JORDAN
12/11/89
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
"R"
REVISION DS
(SEE NOTE)
C
"S"
(No OF POS x .050[1.27]) - .050[1.27] REF
(TOL ACCUM ±.005[0.13] OVER 50 POS)
(SEE NOTE)
C-XX-02-XXX
02
C
.190
+.005
-.002
+0.13
4.83
-0.05
(SEE NOTE 9)
.190 4.83
.1575±.0050 4.000±0.127
.019±.020 0.48±0.51
01
C
3
IN-PROCESS
-X2
FIG 3
MAX SWAY
-K: POLYIMIDE FILM PAD
(EITHER DIRECTION)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FOR HAND FILL ONLY
NOTE: DIMENSION APPLIES PRIOR
TO RE-PRESS, SEE SECTION "B"-"B"
FOR FINISHED DIMENSION
NOTE: "R" = USED MEASURED DIMENSION REF
"S" = {("R" - .1575[4.000])/2}±.020[0.51]
SFM-XX-D-LC-X
"B"
"B"
+.002
-.005
+0.051
C .185
4.70
-0.127
4°
(SEE NOTES 7 & 9)
SEE NOTE 3
SEE NOTE
SEE NOTE 7
.161 4.09 REF
SEE NOTE 7
2°
FIG 2
-X2: SURFACE MOUNT
(SAME AS FIG 1, DIFFERENT AS SHOWN)
SECTION "B"-"B"
.394 10.01
REF
PPP-02
.225 5.72
REF
"A"±.010[0.25] (SEE TABLE 2)
(NO. OF POS x .050[1.27]) + .125[3.18] REF
SFM-XX-D-A-X
.062 1.57
.050 1.27
REF
FIG 5
-P: PICK AND PLACE PAD
(PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS)
(FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
.050 1.27
REF
R REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
(NO. OF POS x .050[1.27]) + .075[1.91] REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
FIG 4
-A: ALIGNMENT PIN
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
(SAME AS FIG 1, DIFFERENT AS SHOWN)
DWG. NO.
SFM-1XX-XX-XXX-D-XXX
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
BY: JORDAN
12/11/89
SHEET 2 OF
4
REVISION DS
SFM-XX-D-LC-X
(NO OF POS x .050[1.27] + .360[9.14]
C
.218 5.52
REF
.065 1.65
02
2
MAX SWAY
.056 1.42 REF
(EITHER DIRECTION)
2
MAX SWAY
(EITHER DIRECTION)
LC-05-TM
(NO OF POS x .050[1.27] + .075[1.91] REF
.010 0.25 REF
01
FIG 6
-LC: LOCKING CLIP
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(AVAILABLE IN ALL LEADS)
CPS-RR-M2-01-X
'E'
SFM-XX-D-DS
.070 1.78
REF
C
.145 3.68
.335 8.50
REF
"D"
C
WT-27-XX-T
(NO OF POS x .050[1.27] + .600[15.24] REF
.114 2.90 REF
.012 0.30
REF
ACCRT-01
DETAIL 'E'
(NO OF POS x .050[1.27] + .185[4.70] REF
SFM-XX-D-SN
SCALE 6 : 1
C
FLUSH TO .005[0.13] ABOVE
"C"
FIG 8
-DS: DUAL SCREW DOWN
(SAME AS FIG 2, DIFFERENT AS SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
"C" REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
"C"
WT-27-XX-T
.026 0.66
REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
(NO OF POS x .050[1.27] + .085[2.16] REF
2
MAX SWAY
SECTION "C"-"C"
(EITHER DIRECTION)
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
FIG 7
NO. SFM-1XX-XX-XXX-D-XXX
DWG.
-SNX: SOLDER NAIL
(SAME AS FIG 1, DIFFERENT AS SHOWN)
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
BY: JORDAN
12/11/89
SHEET 3 OF
4
PT-1-24-13-09
REVISION DS
.630 16.00
PT-SFM004-X1-X3-D
PT-SFM004-X1-X3-D
PT-1-24-01-60
2.205 56.00
"D"
"D"
*FOR MACHINE LOADING OF TUBES FOR PARTS W/O PADS USE PT-1-24-14-09, TP-24-02
UNWINDING DIRECTION
5 POS -01 AND -03 LEAD STYLES MAY BE TUBED USING PT-1-24-15-09, TP-24-02
2 POS -X1 STYLE TO BE TUBED IN PT-1-24-15-09
(SEE NOTE 6)
PACKAGING VIEW
PACKAGE PARTS IN TUBES AS SHOWN (SEE NOTE 4)
F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
SECTION "D"-"D"
SCALE 2 : 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PACKAGING VIEW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
-TR: TAPE AND REEL
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY
DWG. NO.
SFM-1XX-XX-XXX-D-XXX
SHEET 4 OF
4
BY: JORDAN
12/11/89
相关型号：
SFM-110-03-L-D-P-TR
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-110-03-P-D
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-110-03-S-D
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Socket, ROHS COMPLIANT
SAMTEC
SFM-110-03-S-D-A
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明