SFM-120-01-S-S-LC-P [SAMTEC]
Board Connector, 20 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,;
| 型号： | SFM-120-01-S-S-LC-P |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 20 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket, |
| 文件： | 总3页 (文件大小：418K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SFM-1XX-XX-XX-S-XX
REVISION AW
OPTIONS
No OF POSITIONS
(LEAVE BLANK FOR STANDARD
AND USE SFM-XX-S-LC-X)
ALL POSITIONS AVAILABLE
-02 THRU -32
DO NOT
SCALE FROM
THIS PRINT
-A: ALIGNMENT PIN (USE SFM-XX-S-A-X)
(SEE FIG. 3)
-LC: LOCKING CLIP (SEE FIG 5) (SEE NOTE 5)
(USE (2) LC-05-TM & SFM-XX-S-LC-X)
-P: PICK AND PLACE PAD (SEE FIG 4)
(USE PPP-14)
(AVAILABLE ON 5 THRU 50 POS ONLY)
-K: POLYIMIDE FILM (SEE FIG 6, SHT 2)
-TR: TAPE AND REEL (-X2 LEAD STYLE ONLY)
*-SN: SOLDER NAIL (SEE SHT 3, FIG 7)
USE BODY (SFM-XX-S-XX-X)
LEAD STYLE
-01: THROUGH HOLE
.080 2.03 REF
(SEE NOTE 6)
USE CONTACT: (C-44-01-XX)
(SEE FIG 1)
-02: SURFACE MOUNT
.070 1.78 REF
.050 1.27 REF
USE CONTACT: (C-44-02-XX)
(SEE FIG 2)
-03: STRAIGHT MODIFIED
USE CONTACT: (C-44-03-XX)
(SEE FIG 1)
.095 2.41 REF
(SEE NOTE 6)
-L1: THROUGH HOLE (LOW INSERTION)
USE CONTACT: (C-61-01-XXX)
(SEE FIG 1)
BODY SPECIFICATION
-S: SINGLE ROW
-L2: SURFACE MOUNT (LOW INSERTION)
USE CONTACT: (C-61-02-XXX)
(SEE FIG 2)
PLATING SPECIFICATION
.050 1.27 REF
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
POSITION #1
-L3: STRAIGHT MODIFIED (LOW INSERTION)
USE CONTACT: (C-61-03-XX)
(SEE FIG 1)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-T1: THROUGH HOLE (PHOS BRONZE)
USE CONTACT: (C-119-01-XXX)
(SEE FIG 1)
-T2: SURFACE MOUNT (PHOS BRONZE)
USE CONTACT: (C-119-02-XXX)
(SEE FIG 1)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA;
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(NO OF POS x .050[1.27]) + .155[3.94] REF
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
* = NOT TOOLED
SFM-XX-S-XX-X
(NO OF POS x .050[1.27]) + .015[0.38] REF
-LM: SELECTIVE LIGHT GOLD
-SPECIFY -L IN PLATING SUFFIX -X/
MATTE TIN TAILS
"A"
(USE C-XX-XX-L)
.180 4.57
.015 0.38 REF
(SEE NOTE 6)
REF
.110 2.79 REF
C
'A'
(SEE TABLE 1)
C-XX-01-XX
"A"
2° MAX SWAY
'B' REF
1° MAX SWAY
(SEE TABLE 1)
.005 0.13 REF
C
SECTION "A"-"A"
(NO OF POS x .050[1.27]) - .050[1.27]
FIG 1
THROUGH HOLE/STRAIGHT MODIFIED
(SFM-130-X1-XX-S-XX SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
NOTES:
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
C
1.
REPRESENTS A CRITICAL DIMENSION FOR STATISTICAL PROCESS CONTROL.
.XXX: .005 [0.13]
2. MINIMUM PUSHOUT FORCE: .5 LBS
3. COPLANARITY TO BE WITHIN .004[0.10]
4. TUBE ALL POSITIONS.
5. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE
-LC OPTION.
.XXXX: .0020 [0.051]
C
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 [1.27] C.L. SOCKET STRIP
SINGLE ROW ASSEMBLY
INSULATOR: VECTRA E130, COLOR: BLACK
CONTACT: BeCu #25
DWG. NO.
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
SFM-1XX-XX-XX-S-XX
6. DIMENSION N/A FOR -N OPTION.
BY: REIDINGER
09/08/1992 SHEET 1 OF 3
F:\DWG\MISC\MKTG\SFM-1XX-XX-XX-S-XX-MKT.SLDDRW
SFM-XX-S-A-X
(NO OF POS x .050[1.27]) + .125[3.18] REF
REVISION AW
(TOL ACCUM ±.005[0.13] OVER 50 POS)
(NO OF POS x .050[1.27]) - .050[1.27]
02
.050 1.27
REF
C
L
01
POSITION 1 TO
POINT IN DIRECTION
OF ARROW
R. REF
.050 1.27 REF
C-XX-02-XX
1° MAX SWAY
C
(NO OF POS x .050[1.27]) + .075[1.91]
FIG 3
(NO OF POS x .050[1.27]) + .155[3.94] REF
-A: ALIGNMENT PIN
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(SFM-125-02-XX-S-A SHOWN)
SFM-XX-S-XX-X
"B"
+.002
-.005
+0.04
4.70
-0.12
C .185
4°
.065 1.65
C
"B"
2°
.113 2.87 REF
LC-05-TM
.0560 1.422 REF
(NO. OF POS x .050[1.27]) - .075[1.90]
(NO OF POS x .050[1.27]) - .050[1.27]
SECTION "B"-"B"
.010 0.25
REF
FIG 2
SURFACE MOUNT
FIG 5
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(SFM-130-02-XX-S-XX SHOWN)
-LC: LOCKING CLIP
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(SFM-112-02-XX-S-LC SHOWN)
"R" REF
USED MEASURED DIMENSION
.019±.020 0.49±0.51
((NO OF POS x .050[1.27])
- .360[9.14]) / 2 ± .020[0.51]
.375 9.53 REF
.1083±.0050 2.751±0.127
.190±.020 4.83±0.51
(("R" - .1083[2.751])/2)
± .020[0.51]
PPP-14
.110 2.79
REF
.050 1.27
C
L
FIG 6
-K: OPTION (POLYIMIDE FILM PAD)
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(SFM-112-02-XX-S-K SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
SHEET SCALE: 4:1
.050 [1.27] C.L. SOCKET STRIP
SINGLE ROW ASSEMBLY
FIG 4
DWG. NO.
-P: PICK & PLACE PAD
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(PLACE PAD ABOUT C.L. AS SHOWN)
(SFM-112-02-XX-S-P SHOWN)
SFM-1XX-XX-XX-S-XX
09/08/1992 SHEET 2 OF
BY:REIDINGER
3
F:\DWG\MISC\MKTG\SFM-1XX-XX-XX-S-XX-MKT.SLDDRW
.472 12.00
REF
REVISION AW
(NO OF POS x .0501.27]) + .260[6.60] REF
POS #1
SFM-XX-S-SN
C
L
"C"
"C"
C
L
FLUSH TO .005[0.13] ABOVE
2.205 56.00
REF
.055 1.40
WT-27-03-T
2° MAX SWAY
(NO OF POS x .050[1.27]) + .085[2.16]
.026 0.66 REF
2° MAX SWAY
FIG 7
SECTION "C"-"C"
*-SN: SOLDER NAIL OPTION
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(SFM-110-02-XX-S-SN SHOWN)
PACKAGE PARTS IN TUBE AS SHOWN
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
PT-1-24-01-12
POSITION 1
POSITION 1
ANTI-STATIC
PT-1-24-01-24
-TR: TAPE AND REEL
(SFM-125-02-XX-S-XX SHOWN)
ANTI-STATIC
PT-1-24-01-24
POSITION 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
ANTI-STATIC
ANTI-STATIC
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
PT-SFM001-X2-S
DESCRIPTION:
.050 [1.27] C.L. SOCKET STRIP
SINGLE ROW ASSEMBLY
POSITION 1
SHEET SCALE: 4:1
DWG. NO.
SFM-1XX-XX-XX-S-XX
09/08/1992 SHEET 3 OF
BY:REIDINGER
3
F:\DWG\MISC\MKTG\SFM-1XX-XX-XX-S-XX-MKT.SLDDRW
相关型号：
SFM-120-01-S-S-P
Board Connector, 20 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-120-01-SM-D-A-K
Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-120-01-SM-S
Board Connector, 20 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-120-01-STL-D
Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFM-120-02-F-D-A-K-TR
Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明