SFML-132-02STL-D [SAMTEC]
64 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, SOCKET;
| 型号： | SFML-132-02STL-D |
| 厂家： | 
SAMTEC |
| 描述： | 64 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, SOCKET 连接器 集管和边缘连接器 |
| 文件： | 总4页 (文件大小：625K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION X
SFML-1XX-XX-XXX-D-XX
OPTIONS
X
No OF POSITIONS
-05, -07, -10 THRU -50
(PER ROW)
(LEAVE BLANK FOR STANDARD
.020 0.51
REF
AND USE SFML-XX-D)
-A: ALIGNMENT PIN (USE SFML-XX-D-A)
(SEE FIG 5, SHT 3)
.060 1.52
REF
LEAD STYLE
-LC: LOCKING CLIP (SEE FIG 7, SHT 3)
(USE (2) LC-05-TM & SFML-XX-D)
-P: PICK & PLACE PAD (SEE FIG 6, SHT 3)
(USE PPP-02) (NOT AVAILABLE IN 5 POS)
-TR: TAPE & REEL PACKAGING
(SEE FIG 2, SHT 1)
FIG. 1
DETAIL 'D'
ALTERNATE CONSTRUCTION-01: THROUGH HOLE
X
(USE C-44-01-XXX, SEE FIG 1, SHT 1)
THROUGH HOLE/STRAIGHT MODIFIED
-02: SURFACE MOUNT
(SHOWN: SFML-125-X1-XXX-D)
(USE C-44-02-XXX, SEE FIG 3, SHT 2)
-03: STRAIGHT MODIFIED
"A"
"A"
'D'
"B"
-K: POLYIMIDE FILM PAD
(USE C-44-03-XXX, SEE FIG 1, SHT 1)
-L1: THROUGH HOLE (LOW INSERTION)
(USE C-61-01-XXX, SEE FIG 1, SHT 1)
-L2: SURFACE MOUNT (LOW INSERTION)
(USE C-61-02-XXX, SEE FIG 3, SHT 2)
-L3: STRAIGHT MODIFIED (LOW INSERTION)
(USE C-61-03-XXX, SEE FIG 1, SHT 1)
-T1: THROUGH HOLE (PHOS BRONZE)
(USE C-119-01-XXX, SEE FIG 1, SHT 1)
-T2: SURFACE MOUNT (PHOS BRONZE)
(USE C-119-02-XXX, SEE FIG 3, SHT 2)
01
(USE K-500-300)(SEE FIG.4, SHT. 2)
-SN: SOLDER NAIL (USE SFML-XX-D-SN &
WT-27-01-T) (SEE FIG 8, SHT 4)
(AVAILABLE ON -X2 LEAD STYLES ONLY)
.145 3.68 REF
02
ROW SPECIFICATION
"B"
-D: DOUBLE ROW
(USE SFML-XX-D-X)
.050 1.27 REF
.120 3.05 REF
.080 2.03
REF
PLATING SPECIFICATION
-S: SELECTIVE
.100 2.54 REF (TYP)
-P: GOLD FLASHED PALLADIUM
NICKEL
"C" REF (TYP)
(SEE NOTE 5
& TABLE 3)
-F: FLASH SELECTIVE GOLD
-H: HEAVY GOLD
C2
-L: LIGHT SELECTIVE GOLD
-STL: SELECTIVE GOLD/ TIN-LEAD
(ONLY AVAILABLE ON -02 AND -L2
LEADSTYLES)
(No OF POS x .050 [1.27] + .155 [3.94] REF
SFML-XX-D
(No OF POS x .050 [1.27]) + .015 [.38] REF
-SM: HEAVY SELECTIVE GOLD, MATTE TIN TAIL
-LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
-FM: FLASH SELECTIVE GOLD, MATTE TIN TAIL
.035 0.89 REF (TYP)
.065 1.65 REF
.180 4.57
REF
.050 1.27 REF
C3
"A"
(SEE TABLE 1)
.110 2.79
REF
"B" REF
(SEE TABLE 1)
.005 0.13 REF
C1
1
MAX SWAY
(TYP)
2
MAX TOE
(TYP)
C4
SECTION "B"-"B"
.050 1.27
(No OF POS x .050 [1.27]) - .050 [1.27]
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
SECTION "A"-"A"
C8
2. COPLANARITY: .004 [.10] FOR POS. 10 THRU 26
.006 [.15] FOR POS. 27 THRU 50
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH [MM/MM] AFTER ASSEMBLY.
5. POSITIONS -05 AND -07 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN AND
WILL NOT HAVE POLARIZATION NOTCH;
X
FIG. 2
X
-TR: TAPE & REEL PACKAGING
POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN;
POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT DIMENSION SHOWN;
POSITIONS -35- THROUGH -50 WILL HAVE THREE CLIPS: TWO AT DIMENSION
SHOWN & ONE CENTERED ON INSULATOR.
(ALTERNATE KEYING OPTION SHOWN)
6. SEE NOTCH FOR PROPER ORIENTATION.
7. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH ROWS MUST FACW SAME WAY.
8. MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO ROWS: .003[.08].
9. TUBE PARTS WITH NOTCH TOWARD ARROW.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
POS. 1
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
USER DIRECTION OF UNREELING
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
INSULATOR: VECTRA E130i
CONTACT: BeCu
NO.
DWG. SFML-1XX-XX-XXX-D-XX
PHOS BRONZE
SEE NOTE 6
SHEET 1 OF 4
BY:
BRATCHER 4/19/99
F:\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XX-MKT.SLDDRW
FIG. 4
REVISION X
-K: POLYIMIDE FILM PAD OPTION
(SHOWN: SFML-110-X2-X-D-K)
(ALTERNATE CONSTRUCTION SHOWN)
"M"
FIG. 3
C5
.190 4.83
-X2: SURFACE MOUNT
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
"P"
(No OF POS x .050 [1.27]) - .050 [1.27]
(TOL ACCUM .005 [.13] OVER 50 POS.)
.1575±.0050 4.000±0.127
NOTE:
"M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .1575 [4.000]) /2} .020 [.51]
C-XX-X2-XXX
C7
2
MAX SWAY
(TYP)
"C"
"C"
C6
+.002
-.005
+0.05
4.70
-0.13
.185
+4
SEE NOTE 2
-2
.165 4.19 REF
SECTION "C"-"C"
F:\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
DWG.
NSO. FML-1XX-XX-XXX-D-XX
BRATCHER 4/19/99
SHEET 2 OF 4
BY:
PACKAGE PARTS IN TUBES AS SHOWN
FIG. 5
REVISION X
PT-1-24-13-09
( SEE NOTE 9)
-A: ALIGNMENT PIN OPTION
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
SAMTEC
ANTI-STATIC
(No OF POS x .050 [1.27]) + .125 [3.18] REF
SFML-XX-D-A
PT-1-24-14-09
PT-1-24-15-09
.050 1.27 REF
.050 1.27 REF
SAMTEC
ANTI-STATIC
(No OF POS x .050 [1.27]) + .075 [1.91] REF
FIG. 6
-P: PICK & PLACE PAD OPTION
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
.394 10.01 REF
PPP-02
.225 5.72
REF
"A" .010 [.25]
(SEE TABLE 2)
FIG. 7
.062 1.57
-LC: LOCKING CLIP OPTION
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(ALTERNATE CONSTRUCTION SHOWN)
SFML-XX-D
LOCKING TAB
.065 1.65
.056 1.42 REF
.010 0.25 REF
LC-05-TM
(No OF POS x .050 [1.27]) + .075 [1.91]
F:\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XX-MKT.SLDDRW
X
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
DWG. NO.
SFML-1XX-XX-XXX-D-XX
BY:
BRATCHER 4/19/99
SHEET 3 OF 4
REVISION X
FIG. 8
-SN: SOLDER NAIL OPTION
(SHOWN: SFML-125-02-XXX-D-SN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(ONLY AVAILABLE ON -X2 LEAD STYLES)
(No OF POS x .050[1.27]) + .185[4.70] REF
SFML-XX-D-SN
"D"
C
L
C
L
C9
FLUSH TO .005[0.13] ABOVE
.066 1.68 REF
WT-27-01-T
.026 0.66
REF (2 PLCS)
"D"
2
MAX SWAY
(TYP)
SECTION "D"-"D"
C10
(No OF POS x .050[1.27]) + .085[2.16]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY
DWG. NO.
SFML-1XX-XX-XXX-D-XX
F:\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XX-MKT.SLDDRW
BY:
BRATCHER 4/19/99
SHEET 4 OF 4
相关型号：
SFML-132-03-F-D-A
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-F-D-K
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-FM-D-K
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-FM-D-LC
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-H-D-K
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-H-D-LC
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-H-D-TR
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-L-D
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-L-D-A
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-L-D-K
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-L-D-LC
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SFML-132-03-LM-D-A
Board Connector, 64 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明