SFSD-05-30-H-05.00-SR [SAMTEC]
Board Connector, 10 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT;
| 型号： | SFSD-05-30-H-05.00-SR |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 10 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT 连接器 |
| 文件： | 总4页 (文件大小：410K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AG
REVISION AG
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
(No OF POS x .050[1.27])
+ .015[0.38] REF
FEP CABLE OPTION
-T: FEP (LEAVE BLANK FOR
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D, -DL, -DR, -DS & -SS)
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO PIN N-1)
01
DO NOT
SCALE FROM
THIS PRINT
N-1 (SEE TABLE 2)
STANDARD PVC INSULATION)
C
L
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO PIN 2)
No OF POSITIONS
-02, -04, -05, -07, -10, -15, -20, -25,
-30 -35 -40, -45, & -50 (PER ROW)
AVAILABLE AS STANDARD
.250 6.35
REF
-NUX: NOTCH UP, CROSSED
(PIN 1 TO PIN N)
.120 3.05 REF
.145 3.68 REF
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO PIN 1)
-02 THRU -50 AVAILABLE AS ASO
WIRE GAUGE (AWG)
N (SEE TABLE 2)
-28, -30
COLOR CODE:
END OPTION
02
(END OPTION COMBINATIONS NOT AVAILABLE)
-S: SINGLE END
FIG 1
.050 1.27
REF
LEAVE BLANK FOR ALL BLACK WIRE
C: COLOR CODED WIRE, SEE COLOR
SEQUENCE TABLE, SHEET 3
.080 2.03 REF
-D: DOUBLE END
-S: SINGLE END
(SFSD-10-28-XX-XX.XX-S SHOWN)
(MUST CHOOSE FROM -NXX OPTIONS)
-SL: SINGLE ENDED WITH FRICTION LOCK
(SEE SHEET 2, FIG 3)(ONLY AVAILABLE ON
*5,*7, 10 THRU 50 POSITION)
(NOT AVAILABLE WITH FEP OPTION)
ISDF-XX-D
PLATING SPECIFICATION
-DL: DOUBLE ENDED WITH FRICTION LOCK
(SEE SHEET 2, FIG 4) (ONLY AVAILABLE
ON *5,*7, 10 THRU 50 POSITION)
.050 1.27 REF
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
"A"
-G: 10µ" LIGHT GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(MUST CHOOSE FROM -NXX OPTIONS)
-SR: SINGLE ENDED WITH RETENTION LATCH
(SEE SHEET 3, FIG 5)(USE SUB-IM-LTC-07-01-N)
(ONLY AVAILABLE ON -02 THRU -50 POS)
-DR: DOUBLE ENDED WITH RETENTION LATCH
(SEE SHEET 3, FIG 6)(USE SUB-IM-LTC-07-01-N)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(MUST CHOOSE FROM -NXX OPTIONS)
-SS: DUAL SCREW DOWN, SINGLE ENDED CABLE
(SEE SHT 4, FIG 7)
-F: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-GF: 3µ" FLASH SELECTIVE IN CONTACT AREA,
3µ" GOLD ON TAIL
C
.440 11.18
REF
(ONLY AVAILABLE TO EXISTING
CUSTOMERS; SEE -F PLATING)
(SEE TABLE 3, SHEET 1)
.249 6.32
REF
(ONLY AVAILABLE ON 02 THRU 40 POSITIONS)
(NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR
USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01,
MUST CHOOSE FROM NXXX OPTIONS)
-DS: DUAL SCREW DOWN, DOUBLE ENDED CABLE
(SEE SHT 4, FIG 8)
ASSEMBLED LENGTH
SPECIFY IN INCHES
(SINGLE END: 03.00 INCH [76.2mm]
MINIMUM,
(ONLY AVAILABLE ON 02 THRU 40 POSITIONS)
(NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR
USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01,
MUST CHOOSE FROM NXXX OPTIONS)
DOUBLE END: 03.25 INCH [82.6mm]
MINIMUM)
C
ASSEMBLED LENGTH:
(SEE NOTE 8)
(* = NOT AVAILABLE WITH POLARIZATION KEY)
DWCX-XX-XX-300
C
AG
ASSEMBLED LENGTH:
XX.XX .125[3.18]
POLARIZATION KEY
AG
SECTION "A"-"A"
"A"
AG
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 3.0 LBS [13.3 N].
FIG 2
C
C
3. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE.
4. ALL FINISHED GOODS ARE TO BE ELECTICAL TESTED INCLUDING HI-POT TEST
AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY
WITH 1 LABEL-ET.
-D: DOUBLE END
(SFSD-10-28-XX-XX.XX-D-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
6. PARTS TO BE LAYER PACKAGED.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP.
8. FOR LENGTHS LESS THAN 12 in, TOLERANCE SHALL BE +/-.125.
FOR OTHER LENGTHS, TOLERANCE SHALL BE +/-2%.
9. NOTE DELETED.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
C
10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP
DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTS.
11. 3LB MIN WIRE CRIMP STRENGTH FOR -30 AWG AND 4.5LB MIN
WIRE CRIMP STRENGTH FOR -28 AWG.
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCu
DWG. NO.
12. NOTE DELETED.
CABLE INSULATION: PVC OR FEP, SEE CALLOUT
WIRE: DWC: TINNED COPPER. DWCT: SILVER
PLATED COPPER
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
(SEE TABLE 1)
BY:
BRATCHER 5/5/2005
SHEET 1 OF 4
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REVISION AG
(SEE TABLE 2)
(SEE TABLE 2)
N-1
N
N-1
N
(SEE TABLE 2)
02
01
N-1
N
01
02
01
02
NOTCH END 1
01
02
N
N-1
NOTCH END 1
NOTCH END 2
(SEE TABLE 2)
-NUS
NOTCH END 2
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN N-1)
-NDX
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN 1)
(SEE TABLE 2)
N-1
02
01
N
ISDF-XX-D-L
ISDF-XX-D-L
01
02
N
N-1
NOTCH END 1
NOTCH END 2
(SEE TABLE 2)
-NUX
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN N)
(SEE TABLE 2)
(SEE TABLE 2)
N-1
N
N-1
N
FIG 3
-SL: SINGLE END FRICTION LOCK
FIG 4
01
02
01
02
(SFSDX-10-28-XX-XX.XX-SL SHOWN)
-DL: DOUBLE END FRICTION LOCK
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SFSDX-10-28-XX-XX.XX-DL-NUS SHOWN)
NOTCH END 1
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
NOTCH END 2
DESCRIPTION:
-NDS
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.571429
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN 2)
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
BRATCHER 5/5/2005
SHEET 2 OF 4
FIG 6
REVISION AG
-DR: DOUBLE END WITH RETENTION LATCH
(SFSDX-10-28-XX-XX.XX-DR SHOWN)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 5
C
-SR: SINGLE END WITH RETENTION LATCH
(SFSDX-10-28-XX-XX.XX-SR SHOWN)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
.083 2.11 (TYP)
C
.080 2.03 REF
ISDF-XX-D-R
.113 2.86
C
SUB-IM-LTC-07-01-N
.083 2.11 (TYP)
.080 2.03
REF
ISDF-XX-D-R
.113 2.86
C
(No OF POS x .050[1.27])
+ .145[3.68] REF (TYP)
(No OF POS x .050[1.27])
+ .145[3.68] REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
BRATCHER 5/5/2005
SHEET 3 OF 4
FIG 8
FIG 7
REVISION AG
-DS: DOUBLE END WITH SCREW DOWN
(SFSDX-10-XXX-XX-01.60-DS-NDS SHOWN)
(ONLY AVAILABLE ON -02 THRU -40 POS
MUST CHOOSE FROM -NXXX OPTIONS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
-SS: SINGLE END WITH SCREW DOWN
(SFSDX-10-XXX-XX-01.60-SS-NDS SHOWN)
(ONLY AVAILABLE ON -02 THRU -40 POS
MUST CHOOSE FROM -NXXX OPTIONS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
C
(No OF POS X .050[1.27]) + .360 [9.14]
CPS-RR-M2-01-X
C
(No OF POS X .050[1.27]) + .360 [9.14] (TYP)
.079 2.00
REF
CPS-RR-M2-01-X
.079 2.00
REF
ACCRT-01
.145 3.68
C
C
.145 3.68
'A'
ISDF-XX-D-DS
ISDF-XX-D-DS
(No OF POS x .050[1.27])
+.015[0.38] REF
(No OF POS x .050[1.27])
+.015[0.38] REF
"B"
"B"
DETAIL 'A'
SCALE 4 : 1
ACCRT-01
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
R.057 1.45 REF
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
SECTION "B"-"B"
SCALE 4 : 1
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
BRATCHER 5/5/2005
SHEET 4 OF 4
相关型号：
SFSD-05-30-H-23.62-SR
Board Connector, 10 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT
SAMTEC
SFSD-05-30C-F-03.26-S
Board Connector, 10 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
SFSD-05-30C-G-03.10-SR
Board Connector, 10 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明