SMSD-10-24C-L-14.50-S-K [SAMTEC]
Board Connector,;
| 型号： | SMSD-10-24C-L-14.50-S-K |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, |
| 文件： | 总6页 (文件大小：546K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION M
SMSX-XX-XXX-X-XX.XX-X-X-XXX
DESIGNED & DIMENSIONED
IN INCHES[MILLIMETERS]
OPTION
ROW SPECIFICATION
(MUST BE USED ON -D END OPTION
ONLY & APPLIES TO END 2 HOUSING)
-KUS: KEY OR "K", UP, STRAIGHT
-KDS: KEY OR "K", DOWN, STRAIGHT
*-KUX: KEY OR "K", UP, CROSSED
-KDX: KEY OR "K", DOWN, CROSSED
-S: SINGLE ROW
DO NOT
SCALE FROM
THIS PRINT
-D: DOUBLE ROW
No OF POSITIONS
-02, -05, -10, -15, -20
(PER ROW) AVAILABLE AS STANDARD
-02 THRU -40 AVAILABLE AS ASO
OPTION
-K: KEY POLARIZATION
WIRE GAUGE (AWG)
(USE ISXM-XX-K)
(LEAVE BLANK FOR NO POLARIZATION;
(05 POS THRU 40 POS ONLY)
.490 12.45
REF
-24, -26
COLOR CODE
LEAVE BLANK FOR STANDARD WIRE
(SEE TABLE 2)
C: COLOR CODED WIRE
(SEE TABLE 3, SHT 4)
END OPTION
-S: SINGLE END
-D: DOUBLE END
PLATING SPECIFICATION
-L: 10µ" Au IN THE CONTACT AREA,
-F: 3µ" Au IN THE CONTACT AREA,
ASSEMBLY LENGTH
-03.00 IN MINIMUM
(SPECIFY IN INCHES)
(* = 10 POSITION MAXIMUM, -05.00 INCH MINIMUM)
"C" REF
(SEE TABLE 1)
ISSM-05
"B" REF
(SEE TABLE 1)
.145 3.68
(CONTACT LOCATION)
"A" REF
(SEE TABLE 1)
DWC-XX-XX-300
.290 7.37
(MAX POST DEPTH)
C
L
.100 2.54 (TYP) REF
C-383-2426-X
C
.100 2.54 REF
ASSEMBLY LENGTH XX.XXX[XX.XX]
(SEE NOTE 10)
N (SEE TABLE 1)
N
01
01
FIG 1
SMSS-05-XXX-X-XX.XX-D-KDS SHOWN
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM BURR ALLOWANCE: .003[0.08]
3. PARTS TO BE MOLDED TO POSITION.
4. MINIMUM PUSHOUT FORCE: .5 LBS[2.22 N]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
5. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE.
6. ALL FINISHED GOODS ARE TO BE LAYER PACKAGED IN SHIPPING.
C
DECIMALS
ANGLES
X.X: .01[0.3]
2
C 7. ALL PARTS TO PASS ELECTRICAL TEST UPON ASSEMBLY (INCLUDING HI-POT TESTAT 1000
VOLTS DC). AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 ET STAMP
ON THE BODY.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
X.XX: .005[0.13]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
X.XXX: .0020[0.051]
code 55322
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
8. APPLICATIONS INVOLVING SEVERE BENDING REQUIRE 6" MINIMUM CABLE LENGTH.
9. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
INSULATOR: PBT, COLOR: WHITE
CONTACT: PHOS BRONZE
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
NO.
DWG. SMSX-XX-XXX-X-XX.XX-X-X-XXX
10. FOR ASSEMBLY LENGTHS LESS THAN 12.00 IN, TOLERANCE SHALL
BE ±.125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE ± 2%.
11. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR.
BY:
VICKY Z
09/01/2011 SHEET 1 OF 6
F:\DWG\MISC\MKTG\SMSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
REVISION M
(SEE NOTE 9)
(SEE NOTE 9)
(ASSEMBLY LENGTH - "E")
(SEE TABLE 5)
(ASSEMBLY LENGTH - "D")
(SEE TABLE 5)
(SEE NOTE 9)
-S: SINGLE END
-D: DOUBLE END
CABLE CUT IN-PROCESS
02
N
01
N-1
01
N
.100 2.54 REF
02
N-1
ISDM-02
.200 5.08
REF
FIG 2
SMSD-02-XXX-X-XX.XX-D-KUS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
N
02
01
N-1
.150 3.81
REF (TYP)
01
02
N
N-1
.175 4.45 REF
(TYP)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
.050 1.27
REF (TYP)
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
ISDM-05-K
FIG 3
SMSD-05-XXX-X-XX.XX-D-K-KUS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG.
NO. SMSX-XX-XXX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\SMSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
VICKY Z
09/01/2011 SHEET 2 OF 6
REVISION M
02
01
02
01
N
N-1
N
N-1
ISDM-05-K
FIG 4
SMSD-05-XXX-X-XX.XX-D-K-KDS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
ASSEMBLY LENGTH XX.XXX XX.XX
01
N
ISSM-05
FIG 5
SMSS-05-XXX-X-XX.XX-S SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
SMSX-XX-XXX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\SMSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
VICKY Z
09/01/2011 SHEET 3 OF 6
REVISION M
01
02
N-1
N
ISDM-05-K
FIG 6
SMSD-05-XXX-X-XX.XX-S-K SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
SMSX-XX-XXX-X-XX.XX-X-X-XXX
VICKY Z
F:\DWG\MISC\MKTG\SMSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
09/01/2011 SHEET 4 OF 6
REVISION M
N
01
.150 3.81
REF
01
N
.175 4.45 REF
.050 1.27
REF
ISSM-05-K
FIG 7
SMSS-05-XXX-X-XX.XX-D-K-KUS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
01
01
N
N
ISSM-05-K
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
FIG 8
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
SMSS-05-XXX-X-XX.XX-D-K-KDS SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 7)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
SMSX-XX-XXX-X-XX.XX-X-X-XXX
F:\DWG\MISC\MKTG\SMSX-XX-XXX-X-XX.XX-X-X-XXX-MKT.SLDDRW
BY:
VICKY Z
09/01/2011 SHEET 5 OF 6
N
REVISION M
01
N
01
FIG 9
SMSS-05-XXX-X-XX.XX-D-K-KUX SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 7)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
02
02
01
01
N
N-1
N
N-1
FIG 10
SMSD-05-XXX-X-XX.XX-D-K-KDX SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
02
01
N-1
N
01
02
N
N-1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
FIG 11
SMSD-05-XXX-X-XX.XX-D-K-KUX SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
(SEE SHT 4, TABLE 4 FOR PIN MAPPING)
SMSX-XX-XXX-X-XX.XX-X-X-XXX
09/01/2011 SHEET 6 OF
BY: VICKY Z
6
相关型号：
SMSD-10-24C-L-90.55-S-K
Board Connector, 20 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明