SQW-142-01-F-D-VS-LC [SAMTEC]
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,;
| 型号： | SQW-142-01-F-D-VS-LC |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, 连接器 |
| 文件： | 总3页 (文件大小：313K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AP
NOTES:
SQW-1XX-01-XXX-D-VS-XX-XXX
C
POLARIZATION OPTION
-XXX: INDICATES POSITION POLARIZED
(USE PK-07-N, SEE FIG 2, SHT 2)
No OF POSITIONS
-02 THRU -50
(PER ROW)
1.
REPRESENTS A CRITICAL DIMENSION.
2. POSITIONS -04 THRU -50 ARE TO BE TUBED.
3. POSITIONS 02 & 03 ARE TO BE LAYERED PACKAGED.
4. MAXIMUM CUT FLASH: .010[.25].
DO NOT
SCALE FROM
THIS PRINT
OPTION
LEAD STYLE
-01
5. STAKED ALIGNMENT PIN USED AT SAMTECS DISCRETION.
6. MEASURE THE HEIGHT FROM THE EDGE, NOT THE BREAK OFF.
7. MEASURED AT BEND RADIUS, NOT END OF PIN.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
-A: STAKED & MOLDED IN ALIGNMENT PIN
(5 POS MIN) (USE SM-A8H, SEE FIG 3, SHT 2)
-LC: LOCKING CLIP (5 POS MIN)
(USE LC-07-TM, SEE FIG 4, SHT 2 & NOTE 8)
-P: PICK & PLACE PAD (4 POS MIN)
(USE LMP-03, SEE FIG 6, SHT 2)
PLATING SPECIFICATION
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (93/7+/-5%) TAIL
-TR: TAPE & REEL
(AVAILABLE POS 4 THRU 28)
9. MINIMUM PUSHOUT FORCE: .5 LB.
10. NOTE DELETED.
-K: POLYAMIDE FILM PAD (4 POS MIN)
(USE K-DOT-.167-.281-.005, SEE FIG 7, SHT 2)
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
TAIL STYLE
-VS: VERTICAL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
ROW SPECIFICATION
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-D: DOUBLE (USE SQW-XX-D)
C
((No OF POS x .07874 [2.000]) + .0117 [.297]) .010 [.25]
(No OF POS x .07874 [2.000]) - .07874 [2.000] REF
02
.157 4.00
REF
.07874 2.0000
REF
C
.090 2.29
01
2
MAX SWAY
IN-PROCESS
(EITHER DIRECTION)
.064 1.61
REF
SQW-XX-D
+4°
- 0°
90°
.203 5.16
.250 6.35
REF
REF
.050 1.27
(SEE NOTE 7)
C
.015 0.38
REF
SEE TABLE 1
2
MAX SWAY
.014 0.36 REF
(EITHER DIRECTION)
.0197 0.500 REF (TYP)
.034 0.85 REF
C-97-01-XXX
.186 4.72 REF
FIG 1
SQW-110-01-XXX-D-VS SHOWN
PROPRIETARY NOTE
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
2MM SOCKETS TRIP ASSEMBLY
DWG. NO.
SQW-1XX-01-XXX-D-VS-XX-XXX
SHEET 1 OF
3
BY: DEAN P
04/22/1997
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
REVISION AP
02
01
14
.050 1.27
FIG 2
.056 1.42 REF
POLARIZATION OPTION LOCATION
INSERT PK-07-N INTO SPECIFIED
POSITION AND BREAK OFF TAB
LC-07-TM
C
FIG 4
{(No OF POS x .07874 [2.000])
- .1575 [4.000]} .002 [.51]
.010 0.25 REF
-LC: LOCKING CLIP
(5 POS MIN)
SQW-110-01-XXX-D-VS-014 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
SQW-110-01-XXX-D-VS-LC SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.0350 0.889 REF
.035 0.89
(SEE NOTE 6)
SM-A8H
.0430 1.092 REF
FIG 5
FIG 3
C
-A: MOLDED ALIGNMENT PIN
(5 POS MIN)
-A: STAKED ALIGNMENT PIN
{(No OF POS x .07874 [2.000])
- .1575 [4.000]} .002 [.51]
(5 POS MIN)
SQW-110-01-XXX-D-VS-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
SQW-110-01-XXX-D-VS-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.005±.020 0.13±0.51
"R"(SEE NOTE)
.305 7.75
"S"(SEE NOTE)
{(No OF POS x .07874 [2.000])
+ .0117[.297]}/2} - .1125 [2.858] .020 [.51]
C
.202 5.13 REF
L
.225 5.72 REF
C
L
C
L
.1673±.0050 4.250±0.127
C
L
FIG 7
POLYAMIDE FILM PAD
(4 POS MIN)
NOTE:
"R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .1673 [4.25]) / 2}±.020 [.51]
SQW-110-01-XXX-D-VS-K SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.308 7.82
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
FIG 6
-P: PICK & PLACE PAD
(4 POS MIN)
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
2MM SOCKETS TRIP ASSEMBLY
SQW-110-01-XXX-D-VS-P SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
DWG. NO.
SQW-1XX-01-XXX-D-VS-XX-XXX
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
SHEET 2 OF
3
BY: DEAN P
04/22/1997
REVISION AP
LOOSE END OF REEL
POSITION 1
LABEL
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
PARTS TO COME OFF REEL AS SHOWN
WITH POCKETS FACING UP
UNWINDING DIRECTION
TAPE & REEL VIEW
REEL
PT-1-24-03-09
TP-09
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
2MM SOCKETS TRIP ASSEMBLY
TUBE VIEW
DSWGQ. W-1XX-01-XXX-D-VS-XX-XXX
NO.
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
SHEET 3 OF
3
BY: DEAN P
04/22/1997
相关型号：
SQW-142-01-F-T-A
Board Connector, 126 Contact(s), 3 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator
SAMTEC
SQW-142-01-FM-Q
Board Connector, 168 Contact(s), 4 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SQW-142-01-FM-T
Board Connector, 126 Contact(s), 3 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SQW-142-01-G-5
Board Connector, 210 Contact(s), 5 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Socket,
SAMTEC
SQW-142-01-H-D
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SQW-142-01-H-Q
Board Connector, 168 Contact(s), 4 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SQW-142-01-L-5-A
Board Connector, 210 Contact(s), 5 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator
SAMTEC
SQW-142-01-L-D
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Socket, ROHS COMPLIANT
SAMTEC
SQW-142-01-L-D-VS
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
SQW-142-01-L-D-VS-A
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket,
SAMTEC
SQW-142-01-L-D-VS-A-001
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SQW-142-01-L-D-VS-A-P
Board Connector, 84 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明