SSM-103-S-SH-001 [SAMTEC]
Board Connector,;
| 型号： | SSM-103-S-SH-001 |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, |
| 文件： | 总4页 (文件大小：386K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION CZ
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .50 LBS.
OPTION
No OF POSITIONS
-02 THRU -36
(SEE NOTE 8)
DO NOT
SCALE FROM
THIS PRINT
3. COPLANARITY TO BE:
-TR: TAPE AND REEL
(SEE FIG 8, SHT 4)
(29 POSITIONS MAX)
-DH: -36 THRU -28 POS: .008[0.20]
-02 THRU -27 POS: .006[0.15]
-SV, -SH: -02 THRU 36 POS: .006 (FULL STRIP STOCK: .008).
4. PACKAGE IN TUBES PER SHT 4, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE.
5. MAXIMUM CUT FLASH: .015[0.38].
6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1.
7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER.
8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY.
9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13]
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS
LOSE 1 POSITION PER CUT.
12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK &
PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION.
13. THIS DIMENSION IS TO BE MEASURED RELATIVE TO DATUM -Z-.
14. CHAMFERED END WALL MAY OR MAY NOT BE ON CUT TO POSITION PARTS.
PLATING SPECIFICATION
OPTION
-S: 30µ" SELECTIVE GOLD IN CONTACT
-P: PICK AND PLACE PAD
(ONLY AVAILABLE ON -SV,
USE PPP-12, SEE FIG 6, SHT 3)
(SEE NOTE 12)
AREA, MATTE TIN ON TAIL.
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-T: MATTE TIN ON CONTACT AND TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-K: POLYIMIDE FILM PAD
(SEE FIG 5, SHT 2)
(USE K-DOT-.138-.250-.005)
(NOT AVAILABLE ON -SH AND -DH)
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA, TIN/LEAD (90/10) ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
POLARIZATION OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N, SEE FIG 7, SHT 3
FOR POLARIZATION POSITIONS)
(NOT AVAILABLE FOR -BE OPTION)
-TM: MATTE TIN ON CONTACT AND TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT
MOUNTING OPTION
-LC: LOCKING CLIP
TAIL SPECIFICATION
(USE LC-05-TM, SEE NOTE 10)
(FOR -SH AND -DH USE MOLDED TO
POSITION BODIES)
-SV: SINGLE VERTICAL (SEE FIG 1)
(USE SSM-XX-S)
-SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2)
(USE SSM-XX-SH)
OPTION
C
(NO OF POS x .100[2.54]) -.100[2.54]
(NO OF POS x .100[2.54])
-DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 3)
(USE BCH-XX-D)
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -SV)
(USE SSM-XX-S-BE)
±.010[0.25] (CUT TOLERANCE, SEE NOTE 11)
±.005[0.13] (MOLDED BODY TOLERANCE)
(SEE FIG 2, SHT 2)
.050 1.27
REF
02
36
.100 2.54 REF
01
35
2
CONTACT #1
SSM-XX-S
.18 4.6 REF
C
MAX SWAY
-Z-
(EITHER DIRECTION)
C
+.002
-.005
FLUSH TO .005[0.13] MAX
C
1°
+0.051
7.49
-0.127
"A"
"A"
SEE NOTE 9
.295
(SEE NOTE 13)
(MEASURE AT BEND)
.290 7.37 REF
SEE NOTE 3
C
'D'
4°
(SEE NOTE 13)
C
.050 1.27
DETAIL 'D'
SCALE 8 : 1
LC-05-TM
2
MAX SWAY
.047 1.19
(EITHER DIRECTION)
(NO OF POS x .100[2.54]) -.200[5.08]
SECTION "A"-"A"
-SV IN-PROCESS
SCALE 3 : 1
FIG 1
-SV: SINGLE VERTICAL ROW
(SSM-1XX-XXX-SV-LC SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [0.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
BY:
KOLB
09/11/1998 SHEET 1 OF 4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
"R"
REVISION CZ
.300 7.62
SSM-XX-S-BE
"S" ±.020[0.51]
01
FIG 5
.138 3.50 REF
.019±.020 0.48±0.51
FIG 2
-K: KAPTON PAD
-SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY
(SSM-1XX-XXX-SV-BE SHOWN)
(SSM-110-XXX-SV-K SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"S" = "R"/2 - .0689[1.750]
.069 1.75
C
.058 1.47
CONTACT #1
+.010
-.020
+0.254
11.00
-0.508
.433
C
-SH IN-PROCESS
3°
(SEE NOTE 13)
.053 1.35 REF
C
.020 0.51
REF
2
MAX SWAY
(EITHER DIRECTION)
-Z-
SEE NOTE 3
C
.015 0.38
MEASURE AT BEND
3°
(SEE NOTE 13)
.320 8.13 REF
SSM-XX-SH
2
MAX SWAY
(EITHER DIRECTION)
.055 1.40
SECTION "B"-"B"
"B"
"B"
.125 3.18
.070 1.78 REF
01
36
LC-05-TM
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
FIG 3
PROPRIETARY INFORMATION AND ALL DESIGN,
-SH: SINGLE HORIZONTAL
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
(SSM-136-XXX-SH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SHEET SCALE: 2:1
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 2 OF 4
CONTACT #1
CONTACT #2
REVISION CZ
C
.430±.020 10.92±0.508
.055 1.40 REF
.078 1.98
.167 4.24
.272 6.91 REF
BCH-XX-D
-DH IN-PROCESS
FLUSH TO .008[0.20] MAX
(SEE NOTE 7)
.055 1.38
SECTION "C"-"C"
SEE NOTE 14
"C"
"C"
02
72
71
01
SEE NOTE 14
FIG 4
-DH: DOUBLE HORIZONTAL
(SSM-1XX-XXX-DH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
01
"R"
02
36
"S"±.010[0.25]
PK-06-N
PK-06-N
SSM-136-XXX-SV-02 SHOWN
SSM-136-XXX-SH-02 SHOWN
.195 4.95
REF
.395 10.03
REF
01
02
36
02
72
71
PK-06-N
PPP-12
SEE NOTE 6
POS 1
.050 1.27
REF
FIG 6
01
-P: PICK AND PLACE PAD
(SSM-110-XXX-SV-P SHOWN)
SSM-136-XXX-DH-02 SHOWN
-02 AND -03 POS NOT AVAILABLE WITH POLARIZATION
-04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3
-05 POS - CANNOT OFFER IF POLARIZATION IS POS 3
*MUST USE TR ON POS 2 & 3
FIG 7
POLARIZATION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
"S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017]
IF NO OF POS IS ODD: "R"/2 - .2475[6.287]
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 3 OF 4
REVISION CZ
MATING SIDE
OF CONNECTOR
POS 1
CONTACT ENTRY
SIDE FOR ASSEMBLY
POS 1
SSM-110-XXX-DH-TR SHOWN
SSM-110-XXX-SH-TR SHOWN
SSM-110-XXX-SV-TR SHOWN
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
FIG 8
-TR: TAPE AND REEL
SCALE 1:1
STANDOFF
SIDE OF BODY
SSM-1XX-XXX-SV-LC-P SHOWN
(SSM-1XX-XXX-SV-LC-K SIMILAR)
SSM-1XX-XXX-SV-LC SHOWN
POS 1
CORE LEAD IN
SIDE OF BODY
SSM-1XX-XXX-SV-P SHOWN
(SSM-1XX-XXX-SV-K SIMILAR)
SSM-1XX-XXX-DH-LC SHOWN
CORE LEAD IN
SIDE OF BODY
1ST POSITION WITH TUBE LOGO
STANDOFF SIDE
OF BODY
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
SSM-1XX-XXX-SH-LC SHOWN
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 9
520 PARK EAST BLVD, NEW ALBANY, IN 47150
TUBE VIEWS
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 4 OF 4
相关型号：
SSM-103-S-SH-001-TR
Rectangular Power Connector, 2 Contact(s), Female, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SH-LC
Board Connector, 3 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SH-LC-002-TR
Board Connector, 3 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SH-LC-TR
Board Connector, 3 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SH-TR
Board Connector, 3 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Socket, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV
Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Socket, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-001
Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-BE
Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-BE-K-TR
Board Connector,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-BE-LC-K
Rectangular Power Connector, 3 Contact(s), Female, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-LC
Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
SSM-103-S-SV-LC-002
Board Connector, 3 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SAMTEC
©2020 ICPDF网 联系我们和版权申明