SSM-104-L-SH-001 [SAMTEC]
Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,;
| 型号： | SSM-104-L-SH-001 |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, |
| 文件： | 总3页 (文件大小：334K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
14
CE
REVISION CE
CE SSM-1XX-XXX-XX-XX-XX-X-XX-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 1LB.
OPTION
No OF POSITIONS
-02 THRU -36
(SEE NOTE 8)
DO NOT
SCALE FROM
THIS PRINT
3. COPLANARITY TO BE:
-TR: TAPE AND REEL
(SEE FIG 8, SHT 3)
(29 POSITIONS MAX)
-DH: -36 THRU -28 POS: .008[0.20]
-02 THRU -27 POS: .006[0.15]
-SV, SH: .006[0.15].
PLATING SPECIFICATION
OPTION
4. PACKAGE IN TUBES PER SHT 2, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE.
5. MAXIMUM CUT FLASH: .015[0.38].
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-P: PICK AND PLACE PAD
(ONLY AVAILABLE ON -SV,
USE PPP-12, SEE FIG 6, SHT 2)
(SEE NOTE 12)
6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1.
7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER.
8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY.
9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13]
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS
LOSE 1 POSITION PER CUT.
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-T: MATTE TIN ON CONTACT AND TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-K: POLYIMIDE FILM PAD
(SEE FIG 5, SHT 2)
(USE K-500-S00)
(NOT AVAILABLE ON -SH AND -DH)
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA, TIN/LEAD (90/10) ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
POLARIZATION OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N, SEE FIG 7, SHT 2
FOR POLARIZATION POSITIONS)
(NOT AVAILABLE FOR -BE OPTION)
12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK &
PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION.
-TM: MATTE TIN ON CONTACT AND TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT
MOUNTING OPTION
-LC: LOCKING CLIP
TAIL SPECIFICATION
(USE LC-05-TM, SEE NOTE 10)
(FOR -SH AND -DH USE MOLDED TO
POSITION BODIES)
-SV: SINGLE VERTICAL (SEE FIG 1)
(USE SSM-XX-S)
-SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2)
(USE SSM-XX-SH)
OPTION
-DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 2)
(USE BCH-XX-D)
(NO OF POS x .100[2.54])
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -SV)
(USE SSM-XX-S-BE)
(NO OF POS x .100[2.54]) -.100[2.54]
(SEE FIG 2, SHT 2)
±.008[0.20] (CUT TOLERANCE, SEE NOTE 11)
±.005[0.13] (MOLDED BODY TOLERANCE)
.050 1.27
REF
02
36
.100 2.54 REF
01
35
2
C
SSM-XX-S
MAX SWAY
(EITHER DIRECTION)
.18 4.6
"A"
"A"
FLUSH TO .005 0.13 MAX
CONTACT #1
SEE NOTE 3
+4°
-0°
90°
C
.290 7.37 REF
C
SEE NOTE 9
'D'
LC-05-TM
CE
DETAIL 'D'
SCALE 8 : 1
C
+.002
-.005
+0.051
1.09
-0.127
2
MAX SWAY
(EITHER DIRECTION)
.043
(NO OF POS x .100[2.54]) -.200[5.08]
.050 1.27
CE -SV IN-PROCESS
SECTION "A"-"A"
FIG 1
-SV: SINGLE VERTICAL ROW
(SSM-1XX-XXX-SV-LC SHOWN)
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [0.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [0.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
BY:
KOLB
09/11/1998 SHEET 1 OF 3
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
"R"
"R"
.295 7.49
REVISION CE
"S" ±.010[0.25]
"S"±.010[0.25]
SSM-XX-S-BE
.195 4.95
REF
.395 10.03
REF
01
CE
.1378 3.500
CE
FIG 5
FIG 2
-K: KAPTON PAD
-SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY
(SSM-1XX-XXX-SV-BE SHOWN)
(SSM-110-XXX-SV-K SHOWN)
PPP-12
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
SEE NOTE 6
POS 1
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.050 1.27
REF
"S" = "R"/2 - .0689[1.750]
CE
FIG 6
.063 1.60
-P: PICK AND PLACE PAD
C
(SSM-110-XXX-SV-P SHOWN)
2
MAX SWAY
.020 0.51 REF
.320 8.13 REF
-02 AND -03 POS NOT AVAILABLE WITH POLARIZATION
-04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3
-05 POS - CANNOT OFFER IF POLARIZATION IS POS 3
*MUST USE TR ON POS 2 & 3
(EITHER DIRECTION)
.064 1.63
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
"S" = IF NO OF POS IS ODD: "R"/2 - .1975[5.017]
IF NO OF POS IS EVEN: "R"/2 - .2475[6.287]
-SH IN-PROCESS
C
.443
SSM-XX-SH
.125 3.18
90°±3°
(TYP)
+.010
-.020
+0.254
11.25
-0.508
"B"
.053 1.35 REF
CE
C
SEE NOTE 3
.070 1.78
01
36
01
.015 0.38
LC-05-TM
CE
"B"
.055 1.40
CE
FIG 3
CONTACT #1
02
SSM-136-XXX-SV-02 SHOWN
36
2
MAX SWAY
(EITHER DIRECTION)
-SH: SINGLE HORIZONTAL
PK-06-N
(SSM-136-XXX-SH-LC SHOWN)
SECTION "B"-"B"
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
01
CE
CE
PK-06-N
02
36
SSM-136-XXX-SH-02 SHOWN
72
71
02 PK-06-N
.078 1.98
.272 6.91 REF
BCH-XX-D
.167 4.24
01
-DH IN-PROCESS
SSM-136-XXX-DH-02 SHOWN
CONTACT #1
CONTACT #2
CE
FIG 7
C
POLARIZATION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.430±.020 10.92±0.508
.225 5.72
"C"
.055 1.40 REF
72
02
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.100 2.54
.070 1.78
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
01
71
"C"
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.055 1.40
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
FLUSH TO .008[0.20] MAX
(SEE NOTE 7)
CE FIG 4
-DH: DOUBLE HORIZONTAL
(SSM-1XX-XXX-DH-LC SHOWN)
SECTION "C"-"C"
CE
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 2 OF 3
REVISION CE
MATING SIDE
OF CONNECTOR
POS 1
CONTACT ENTRY
SIDE FOR ASSEMBLY
POS 1
SSM-110-XXX-DH-TR SHOWN
SSM-110-XXX-SH-TR SHOWN
SSM-110-XXX-SV-TR SHOWN
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
CE
FIG 8
-TR: TAPE AND REEL
SCALE 1:1
STANDOFF
SIDE OF BODY
SSM-1XX-XXX-SV-LC-P SHOWN
(SSM-1XX-XXX-SV-LC-K SIMILAR)
SSM-1XX-XXX-SV-LC SHOWN
POS 1
CORE LEAD IN
SIDE OF BODY
SSM-1XX-XXX-DH-LC SHOWN
CE
CORE LEAD IN
SIDE OF BODY
1ST POSITION WITH TUBE LOGO
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
STANDOFF SIDE
OF BODY
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
CE
SSM-1XX-XXX-SH-LC SHOWN
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
FIG 9
TUBE VIEWS
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 3 OF 3
相关型号：
SSM-104-L-SH-001-TR
Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SH-LC
Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SH-P
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, 0.1 inch Pitch, Black Insulator, Plug
SAMTEC
SSM-104-L-SH-TR
Board Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Socket, ROHS COMPLIANT
SAMTEC
SSM-104-L-SV-BE-LC
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-LC-K
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-LC-K-TR
Rectangular Power Connector, 4 Contact(s), Female, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-LC-P-TR
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-LC-TR
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-P
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-104-L-SV-BE-P-TR
Board Connector, 4 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明