SSM-111-L-DH [SAMTEC]
Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, ROHS COMPLIANT;
| 型号： | SSM-111-L-DH |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, ROHS COMPLIANT 连接器 |
| 文件： | 总4页 (文件大小：374K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION CS
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: .50 LBS.
OPTION
No OF POSITIONS
-02 THRU -36
(SEE NOTE 8)
3. COPLANARITY TO BE:
-TR: TAPE AND REEL
(SEE FIG 8, SHT 4)
(29 POSITIONS MAX)
-DH: -36 THRU -28 POS: .008[0.20]
DO NOT
SCALE FROM
THIS PRINT
-02 THRU -27 POS: .006[0.15]
-SV, SH FULL STRIP STOCK: .008[0.20] (MUST MEET ASSEMBLY SPEC WHEN CUT.
4. PACKAGE IN TUBES PER SHT 3, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE.
5. MAXIMUM CUT FLASH: .015[0.38].
6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1.
7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER.
8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY.
9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13]
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS
LOSE 1 POSITION PER CUT.
12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK &
PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION.
13. THIS DIMENSION IS TO BE MEASURED RELATIVE TO DATUM -Z-.
PLATING SPECIFICATION
OPTION
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-P: PICK AND PLACE PAD
(ONLY AVAILABLE ON -SV,
USE PPP-12, SEE FIG 6, SHT 3)
(SEE NOTE 12)
-L: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-T: MATTE TIN ON CONTACT AND TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
-K: POLYIMIDE FILM PAD
(SEE FIG 5, SHT 2)
(USE K-500-S00)
(NOT AVAILABLE ON -SH AND -DH)
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA, TIN/LEAD (90/10) ON TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
POLARIZATION OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N, SEE FIG 7, SHT 3
FOR POLARIZATION POSITIONS)
(NOT AVAILABLE FOR -BE OPTION)
-TM: MATTE TIN ON CONTACT AND TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT
MOUNTING OPTION
-LC: LOCKING CLIP
TAIL SPECIFICATION
(USE LC-05-TM, SEE NOTE 10)
(FOR -SH AND -DH USE MOLDED TO
POSITION BODIES)
-SV: SINGLE VERTICAL (SEE FIG 1)
(USE SSM-XX-S)
-SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2)
(USE SSM-XX-SH)
OPTION
-DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 3)
(USE BCH-XX-D)
(NO OF POS x .100[2.54])
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -SV)
(USE SSM-XX-S-BE)
C
(NO OF POS x .100[2.54]) -.100[2.54]
(SEE FIG 2, SHT 2)
±.008[0.20] (CUT TOLERANCE, SEE NOTE 11)
±.005[0.13] (MOLDED BODY TOLERANCE)
.050 1.27
REF
02
36
.100 2.54 REF
C
MAX SWAY
(EITHER DIRECTION)
01
35
2
C
SSM-XX-S
FLUSH TO .005[0.13] MAX
CONTACT #1
.18 4.6 REF
"A"
"A"
-Z-
C
1°
+.002
+0.051
7.49
-0.127
.295
C
-.005
(SEE NOTE 13)
.290 7.37 REF
(MEASURE AT BEND)
SEE NOTE 3
SEE NOTE 9
C
.050 1.27
C
4°
DETAIL 'D'
SCALE 8 : 1
'D'
(NO OF POS x .100[2.54]) -.200[5.08]
(SEE NOTE 13)
.043±.005 1.09±0.127
2
MAX SWAY
(EITHER DIRECTION)
-SV IN-PROCESS
LC-05-TM
FIG 1
SECTION "A"-"A"
-SV: SINGLE VERTICAL ROW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
(SSM-1XX-XXX-SV-LC SHOWN)
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
BY:
KOLB
09/11/1998 SHEET 1 OF 4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
"R"
.295 7.49
REVISION CS
"S" ±.010[0.25]
SSM-XX-S-BE
01
.1378 3.500
.019±.010 0.48±0.254
FIG 5
FIG 2
-K: KAPTON PAD
-SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY
(SSM-1XX-XXX-SV-BE SHOWN)
(SSM-110-XXX-SV-K SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"S" = "R"/2 - .0689[1.750]
.063 1.60
C
.064 1.63
CONTACT #1
+.010
-.020
+0.254
11.00
-0.508
.433
-SH IN-PROCESS
C
3°
(SEE NOTE 13)
C
.053 1.35 REF
.020 0.51
2
MAX SWAY
(EITHER DIRECTION)
REF
-Z-
SEE NOTE 3
C
.015 0.38
MEASURE AT BEND
3°
(SEE NOTE 13)
.320 8.13 REF
SSM-XX-SH
2
MAX SWAY
(EITHER DIRECTION)
.055 1.40
SECTION "B"-"B"
"B"
"B"
.125 3.18
.070 1.78 REF
01
36
LC-05-TM
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 3
-SH: SINGLE HORIZONTAL
(SSM-136-XXX-SH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 2 OF 4
CONTACT #1
CONTACT #2
REVISION CS
C
.430±.020 10.92±0.508
.055 1.40 REF
.078 1.98
.167 4.24
.272 6.91 REF
BCH-XX-D
-DH IN-PROCESS
FLUSH TO .008[0.20] MAX
(SEE NOTE 7)
.055 1.38
SECTION "C"-"C"
"C"
"C"
02
72
71
01
FIG 4
-DH: DOUBLE HORIZONTAL
(SSM-1XX-XXX-DH-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
01
"R"
"S"±.010[0.25]
02
36
PK-06-N
.195 4.95
REF
.395 10.03
REF
SSM-136-XXX-SV-02 SHOWN
01
02
36
PK-06-N
SSM-136-XXX-SH-02 SHOWN
PPP-12
SEE NOTE 6
POS 1
.050 1.27
REF
PK-06-N
72
71
02
FIG 6
-P: PICK AND PLACE PAD
(SSM-110-XXX-SV-P SHOWN)
01
-02 AND -03 POS NOT AVAILABLE WITH POLARIZATION
-04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3
-05 POS - CANNOT OFFER IF POLARIZATION IS POS 3
*MUST USE TR ON POS 2 & 3
SSM-136-XXX-DH-02 SHOWN
FIG 7
POLARIZATION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"R" = SEE FIG 1, SHEET 1 FOR OAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
PROPRIETARY NOTE
"S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017]
IF NO OF POS IS ODD: "R"/2 - .2475[6.287]
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 3 OF 4
REVISION CS
MATING SIDE
OF CONNECTOR
POS 1
CONTACT ENTRY
SIDE FOR ASSEMBLY
POS 1
SSM-110-XXX-DH-TR SHOWN
SSM-110-XXX-SH-TR SHOWN
SSM-110-XXX-SV-TR SHOWN
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
USER DIRECTION OF UNREELING
FIG 8
-TR: TAPE AND REEL
SCALE 1:1
STANDOFF
SIDE OF BODY
SSM-1XX-XXX-SV-LC SHOWN
SSM-1XX-XXX-SV-LC-P SHOWN
(SSM-1XX-XXX-SV-LC-K SIMILAR)
POS 1
CORE LEAD IN
SIDE OF BODY
SSM-1XX-XXX-DH-LC SHOWN
CORE LEAD IN
SIDE OF BODY
1ST POSITION WITH TUBE LOGO
STANDOFF SIDE
OF BODY
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SSM-1XX-XXX-SH-LC SHOWN
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 9
520 PARK EAST BLVD, NEW ALBANY, IN 47150
TUBE VIEWS
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP
DWG. NO.
SSM-1XX-XXX-XX-XX-XX-X-XX-XX
F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW
BY:
KOLB
09/11/1998 SHEET 4 OF 4
相关型号：
SSM-111-L-DH-010-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DH-LC
Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DH-LC-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DH-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
SSM-111-L-DV-A-BE-K
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Socket,
SAMTEC
SSM-111-L-DV-A-BE-M-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Socket,
SAMTEC
SSM-111-L-DV-A-K-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DV-A-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DV-BE
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
SSM-111-L-DV-BE-A
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
SSM-111-L-DV-BE-A-K-TR
Board Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明