TCSD-08-D-13.50-01-R [SAMTEC]
Cable Assembly, 28AWG,;
| 型号： | TCSD-08-D-13.50-01-R |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly, 28AWG, |
| 文件： | 总3页 (文件大小：289K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AY
TCSD-XX-X-XX.XX-01-X-XXX-XXX
NOTES:
No OF POSITIONS
OPTIONS #2
SEE OPTIONS BELOW
1. HIDDEN LINES ARE USED TO SHOW POLARIZATION
WHEN USING -N OPTION.
03, 04, 05, 07, 08, 10, 12,
13, 15, 17, 20, 22, 25
DO NOT
SCALE FROM
THIS PRINT
C
REPRESENTS A CRITICAL DIMENSION.
2.
NOTE: OTHER POSITIONS
AVAILABLE AS ASO. TOOL
IS CAPABLE OF POSITIONS 2-25
OPTIONS #1
SEE OPTIONS BELOW
PLATING OPTION
3. AS OF REV 'C' ON TCB-50 CABLE ASSEMBLIES WILL BE LEAD FREE.
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED FOR SHORTS AND OPENS.
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 800V.
6. STRAIN RELIEF TO WITHSTAND 5LB STRAIGHT PULL.
-F: FLASH SELECTIVE GOLD, MATTE TIN TAIL
-L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
(LEAVE BLANK FOR STANDARD -S:
SELECTIVE PLATING)
7. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY NOT EXTEND PAST THE CABLE INSULATION.
8. REFERENCE TCSD-XX-XX-X-X-XXX PRINT FOR CONNECTOR ASSEMBLY AND ITS REQUIREMENTS.
9. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND PAST THE
CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE THICKNESS ON CONSECUTIVE
AND LESS THAN 50% OF THE CABLE THICKNESS ON NON-CONSECUTIVE STRANDS IS
CONSIDERED A PROCESS INDICATOR.
END ASSEMBLY
-S: SINGLE
-D: DOUBLE
ASSEMBLY LENGTH
LEAD STYLE
10. FOR LENGTHS LESS THAN 12.5" TOLERANCE SHALL BE +/-.125,
ALL OTHER LENGTHS SHALL BE +/-1%.
-D"XX", -R, -M & -O OPTION: 2.00[50.8] MINIMUM
ALL OTHER OPTION: 1.00[25.4] MINIMUM
C
XX.XX[XX INCHES x 25.4] ±1%
(SEE NOTE 7 & 10)
.158 4.00
REF
C
XX.XX[XX INCHES x 25.4] ±1%
(SEE NOTE 7 & 10)
.125 3.18 REF
(No OF POS x .07874[2.0000]) + .15748[4.0000] REF
2
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
C
.010 0.25 MAX
.200±.010 5.08±0.254
CABLE OVERHANG (TYP)
(SEE NOTE 7)
-N OPTION
.040 1.02 REF
-N OPTION
-RN2 OPTION
FIRST POSITION INDICATOR
-RN1 OPTION
-N OPTION
1
-RN OPTION
-D: (DOUBLE END)
-S (SINGLE END)
(SAME AS -D UNLESS OTHERWISE STATED)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
02
01
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS INDICATOR
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
.040 1.02
REF
.125 3.18
REF
DESCRIPTION:
INSULATOR: BLACK PBT
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
CONTACT: HEAT TREATED BeCu
STRAIN RELIEF: BLACK PBT
-RW: REVERSE WIRING
-N: NOTCH POLARIZATION
WIRE: 28 AWG, 7/36, TINNED, COPPER WITH PVC INSULATOR
PLATING:
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS)
(USE TCSD-XX-XX-N)
-L: .000015 GOLD ON CONTACT AREA, TIN ON REMAINDER
-F: .000003 GOLD ON CONTACT AREA, TIN ON REMAINDER
TCSD-XX-X-XX.XX-01-X-XXX-XXX
(AVAILABLE ON POS 04 THRU 25)
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS)
(STANDARD PLATING IS .000030 GOLD ON CONTACT AREA, TIN ON REMAINDER)
BY:
B RAY
11/20/2007 SHEET 1 OF 3
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
REVISION AY
01
03
02
01
03
02
02
01
01
01
01
01
02
01
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX .125[3.18]
(MIN 2 ")
XX±.125 [3.18]
(MIN 2")
-P"XX": POLARIZED MATING
NOTE: THE SAME POSITION WILL BE
POLARIZED ON BOTH ENDS (USE PK-07-N)
MIDDLE SOCKET REVERSED
WHEN DAISY CHAINED
OUTSIDE SOCKET REVERSED WHEN DAISY CHAINED
-M: MIDDLE REVERSED
-O: OUTSIDE REVERSED
(NOT AVAILABLE WITH -R OR -O)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -R OR -M)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
FIRST CONNECTOR
SECOND CONNECTOR
02
TCSD-05-D-XX-01-RN2 SHOWN
01
01
01
01
01
01
02
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX .125[3.18]
(MIN 2")
-D"XX": DAISY CHAINED
.XX .125[3.18][6.70]
(MIN 2")
TCSD-05-D-XX-01-RN1 SHOWN
(2" MIN LENGTH, 1" INCREMENTS ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
-RN1 OR -RN2
PROPRIETARY INFORMATION AND ALL DESIGN,
BOTH SOCKETS REVERSED WHEN DAISY CHAINED
(REVERSE POLARIZATION NOTCH)
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
-R: REVERSE CONNECTOR
e-Mail info@SAMTEC.com
NOTE:
(NOT AVAILABLE WITH -O, -M, -RN1 OR -RN2 OPTION)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
DESCRIPTION:
-RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY
AVAILABLE FOR POSITIONS 4 OR GREATER
(NOT AVAILABLE WITH -R OR -RW OPTIONS)
-RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY
(NOT AVAILABLE WITH -R OR -RW OPTIONS)
(-RNX NOT AVAILABLE WITH -N & -D"XX" OPTIONS)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
TCSD-XX-X-XX.XX-01-X-XXX-XXX
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
BY:
B RAY
11/20/2007 SHEET 2 OF 3
REVISION AY
6
XX
(No. OF POS.) x .07874[2.0000] + .31000[7.8740] REF
.039 1.00
REF
4
2
5.000[127.00] MAX
2.000[50.80] MIN
.310±.010 7.87±0.25
(MEASURED AT BOTH ENDS)
5
-B"XX": BREAKOUT OPTION
(TCSD-10-D-XX.XX-01-X-B05 SHOWN)
3
-SR: STRAIN RELIEF
"XX" = NO. OF CONDUCTORS BROKEN OUT FROM THE FIRST POSITION.
(NOT AVAILABLE WITH -O, -M, -R, -D"XX" OR -B"XX")
(SAME AS -D, UNLESS OTHERWISE STATED)
(SOLD IN ASSEMBLIES ONLY)
AN EVEN NUMBER POSITION BREAKOUT MUST BE SELECTED FOR A DOUBLE ENDED ASSEMBLY
AND THE BREAKOUT ENDS MUST BE EQUAL TO THE FULL POSITION CONNECTOR.
(MUST USE HEAT BEND/STRAIN RELIEF TOOL ON POSITIONS 20-25)
"A"
"B"
(XX.XX[XX INCHES x 25.4]+.5[19.1]) ±.125[3.175]
3
"A"
XX.XX[XX INCHES x 25.4] x 2
"B"
FIRST POSITION
INDICATOR
FIRST POSITION
INDICATOR
+.250[6.35] ±1%
SECTION "B"-"B"
SECTION "A"-"A"
IN-PROCESS 1
(-SR ONLY)
IN-PROCESS
(SINGLE END ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
3
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
(XX.XX[XX INCHES x 25.4] ±.125[3.175]
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
IN-PROCESS 2
(-SR ONLY)
TCSD-XX-X-XX.XX-01-X-XXX-XXX
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
BY:
B RAY
11/20/2007 SHEET 3 OF 3
相关型号：
©2020 ICPDF网 联系我们和版权申明