TCSD-08-S-02.00-01 [SAMTEC]
Interconnection Device;
| 型号： | TCSD-08-S-02.00-01 |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device |
| 文件： | 总3页 (文件大小：258K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
TCSD-XX-X-XX.XX-01-XXX-XXX
REVISION AH
1. HIDDEN LINES ARE USED TO SHOW POLARIZATION
WHEN USING -N OPTION
OPTIONS #2
SEE OPTIONS BELOW
C
2.
REPRESENTS A CRITICAL DIMENSION.
No OF POSITIONS
3. AS OF REV 'C' ON TCB-50 CABLE
03, 04, 05, 07, 08, 10, 12,
13, 15, 17, 20, 22, 25
NOTE: OTHER POSITIONS
AVAILABLE AS ASO. TOOL
IS CAPABLE OF POSITIONS 2-25
ASSEMBLIES WILL BE LEAD FREE
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED
FOR SHORTS AND OPENS.
OPTIONS #1
SEE OPTIONS BELOW
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 800V
6. STRAIN RELIEF TO WITHSTAND 5LB STRAIGHT PULL
LEAD STYLE
END ASSEMBY
-S: SINGLE
-D: DOUBLE
ASSEMBLY LENGTH
(2 INCH MINIMUM)
-D: (DOUBLE END)
C1
XX.XX[XX INCHES x 25.4] ±.125[3.175]
-S (SINGLE END)
(SAME AS -D UNLESS OTHERWISE STATED)
XX.XX[XX INCHES x 25.4] ±.125[3.175]
C1
.125 3.18 REF
.158 4.00 REF
(No. OF POS. x .07874[2.0000]) + .15748[4.0000] REF
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
C2
.010 0.25 MAX
CABLE OVERHANG
(TYP)
.200±.010 5.08±0.254
2
-N OPTION
.040 1.02
REF
-N OPTION
NOTCH DENOTES
FIRST POSITION
1
-RN1 OPTION
-RN2 OPTION
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
-N: NOTCH POLARIZATION
(USE TCSD-XX-XX-N)
-RW: REVERSE WIRING
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS. INDICATOR
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
(AVAILABLE ON POS 04 THRU 25)
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
02
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: BLACK PBT
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
CONTACT: HEAT TREATED BeCu
01
STRAIN RELIEF: BLACK PBT
PLATING:
-L: .000015 GOLD ON CONTACT AREA, TIN ON REMAINDER
-F: .000003 GOLD ON CONTACT AREA, TIN ON REMAINDER
(STANDARD PLATING IS .000030 GOLD ON CONTACT AREA,
TIN ON REMAINDER)
DWG. NO.
TCSD-XX-X-XX.XX-01-XXX-XXX
.040 1.02
REF
.125 3.18
REF
BY:
B RAY
11/20/2007 SHEET 1 OF 3
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-XXX-XXX-MKT.SLDDRW
-M: MIDDLE REVERSED
-O: OUTSIDE REVERSED
REVISION AH
-P"XX": POLARIZED MATING
01 03
02
02
01
03
01
02
01
01
01
02
01
01
COLORED WIRE TO SIDE
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
NOTE: THE SAME POSITION WILL BE
POLARIZED ON BOTH ENDS (USE PK-07-N)
XX±.125[3.18]
(MIN 2")
XX±.125[3.18]
(MIN 2")
-RN1 OR -RN2
(REVERSE POLARIZATION NOTCH)
TCSD-05-D-XX-01-RN2 SHOWN
MIDDLE SOCKET REVERSED WHEN DAISY CHAINED
OUTSIDE SOCKET REVERSED WHEN DAISY CHAINED
-R: REVERSE CONNECTOR
-D"XX": DAISY CHAINED
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTION)
(2" MIN LENGTH, 1" INCREMENTS ONLY)
FIRST CONNECTOR
SECOND CONNECTOR
01
01
TCSD-05-D-XX-01-RN1 SHOWN
01
01
01
01
02
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
02
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX±.125[3.18] 6.70
(MIN 2")
XX±.125[3.18] 6.70
(MIN 2")
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
NOTE:
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
-RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY
AVAILABLE FOR POSITIONS 4 OR GREATER
(NOT AVAILABLE WITH -R OPTION)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
-RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY
(NOT AVAILABLE WITH -R OPTION)
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
NO.
DWTG.CSD-XX-X-XX.XX-01-XXX-XXX
BOTH SOCKETS REVERSED WHEN DAISY CHAINED
(REVERSE NOTCH NOT AVAILABLE WITH DAISY CHAIN OPTIONS)
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-XXX-XXX-MKT.SLDDRW
BY:
B RAY
11/20/2007 SHEET 2 OF 3
REVISION AH
-SR: STRAIN RELIEF
(NOT AVAILABLE WITH -O, -M, -R, -D"XX" OR -B"XX")
(SAME AS -D, UNLESS OTHERWISE STATED)
-B"XX": BREAKOUT OPTION
(SOLD IN ASSEMBLIES ONLY)
(MUST USE HEAT BEND/STRAIN RELIEF TOOL ON POSITIONS 20-25)
AH
6
XX
(No. OF POS.) x .07874[2.0000] + .31000[7.8740] REF
2
.039 1.00
REF
4
5.000[127.00] MAX
2.000[50.80] MIN
.310±.010 7.87±0.25
5
"XX" = NO. OF CONDUCTORS BROKEN
OUT FROM THE FIRST POSITION.
3
IN-PROCESS 2
IN-PROCESS 1
(-SR ONLY)
(-SR ONLY)
3
3
(XX.XX[XX INCHES x 25.4]+.5[19.1]) ±.125[3.175]
(XX.XX[XX INCHES x 25.4] ±.125[3.175]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
TCSD-XX-X-XX.XX-01-XXX-XXX
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-XXX-XXX-MKT.SLDDRW
BY:
B RAY
11/20/2007 SHEET 3 OF 3
相关型号：
TCSD-08-S-10.00-01-F-N-P14
Board Connector, 16 Contact(s), 2 Row(s), Female, IDC Terminal, Socket, ROHS COMPLIANT
SAMTEC
TCSD-09-01
Board Connector, 18 Contact(s), 2 Row(s), Female, 0.079 inch Pitch, IDC Terminal, Locking, Black Insulator
SAMTEC
TCSD-10-01-F
Board Connector, 20 Contact(s), 2 Row(s), Female, 0.079 inch Pitch, IDC Terminal, Locking, Black Insulator
SAMTEC
©2020 ICPDF网 联系我们和版权申明