TFC-120-12-F-D-A [SAMTEC]
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT;
| 型号： | TFC-120-12-F-D-A |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT PC 连接器 |
| 文件： | 总4页 (文件大小：1496K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
TFC-1XX-XX-XX-D-XX
REVISION AK
C
1.
REPRESENTS A CRITICAL DIMENSION.
OPTION
2. MINIMUM CONTACT RETENTION: 12 OZS.
3. MINIMUM LOCKING CLIP RETENTION: 8 OZS.
4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13].
5. MAXIMUM TERMINAL BURR: .003[0.08].
6. COPLANARITY: .004[0.10] = POS 02 THRU 26
.006[0.15] = POS 27 THRU 50.
7. MEASURED FROM BEND.
8. MEASURE FROM TIPS OF PIN.
9. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01 & -02
WILL BE SOLID AND WITHOUT SIDE SLOTS.
No OF POSITIONS
LEAD STYLE -01, -02: -02 THRU -50 (ALL
POSITIONS AVAILABLE)
LEAD STYLES -11, -12: (-05 THRU -50 MULTIPLES OF 5)
POSITIONS -12, -16, -17 ALSO AVAILABLE
LEAD STYLES -21, -22: (-05 THRU -50 MULTIPLES OF 5)
POSITIONS -12 & -13 ALSO AVAILABLE
LEAD STYLES -31, -32: (-05 THRU -50 MULTIPLES OF 5)
-12 POSITION ALSO AVAILABLE
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,
SEE TABLE 1, SHT 3) (SEE FIG 5, SHT 3)
(NOT AVAILABLE WITH -RA)
-LC: LOCKING CLIP (USE LC-05-TM)
(NOT AVAILABLE WITH -RA)
(SEE FIG 6, SHT 3, NOTE 3 & 11)
-P: PICK AND PLACE PAD (USE PPP-04)
(AVAILABLE IN ALL POSITIONS -05 THRU -50)
(NOT AVAILABLE WITH -RA)
DO NOT
SCALE FROM
THIS PRINT
10. THIS FEATURE ONLY PRESENT ON -01 & -02 LEAD STYLES.
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE
–LC OPTION.
(SEE FIG 7, SHT 3)
-RA: RIGHT ANGLE
(AVAILABLE ONLY IN LEAD STYLE: -01)
(SEE FIG 8, SHT 2)
-TR: TAPE AND REEL (SEE FIG 4, SHT 4)
(FOR -X2 ONLY)
LEAD STYLE
THROUGH HOLE
-01 (SEE FIG 1)
-11 (SEE FIG 1)
-21 (SEE FIG 1)
-31 (SEE FIG 1)
SURFACE MOUNT
-02 (SEE FIG 2, SHT 2)
-12 (SEE FIG 2, SHT 2)
-22 (SEE FIG 2, SHT 2)
-32 (SEE FIG 2, SHT 2)
12. NOTE DELETED.
(NOT AVAILABLE WITH -RA)
-K: POLYIMIDE FILM (SEE FIG 3, SHT 2)
(ALL LEAD STYLES EXCEPT -21 AVAILABLE)
(NOT AVAILABLE FOR -RA)
(No. OF POSITIONS x .050[1.27]) + .125[3.18] REF
(No. OF POSITIONS x .050[1.27]) + .025[.64] REF
.110 2.79
(SEE TABLE 1, SHT 3)
(USE K-DOT-.217-.313-.005)
PLATING SPECIFICATION
-F: 3µ" FLASH GOLD ON CONTACT AREA,
REF
BODY SPECIFICATION
-D: DOUBLE ROW
MATTE TIN TAIL
02
-L: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
.155 3.94
REF
-LM: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
-FM: 3µ" FLASH GOLD ON CONTACT AREA,
MATTE TIN TAIL
01
.225 5.72
REF
.050 1.27
.135 3.43 REF
REF
SEE NOTE 10
.075 1.91 REF
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
.018 0.46 REF
.050 1.27
2
MAX SWAY
(EITHER DIRECTION)
"D" REF
(SEE TABLE 1,
SHT 3)
2
MAX SWAY
"A"
(EITHER DIRECTION)
.096 2.44
.1635 4.153
REF
"A" REF
(SEE TABLE 1,
SHT 3)
SEE NOTE 9
.010 0.25 REF
.014 0.36 REF
MAX SWAY
"F"±.003[0.08]
(SEE TABLE 1, SHT 3)
2
MAX SWAY
"A"
2
(EITHER DIRECTION)
(EITHER DIRECTION)
.050 1.27
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
SECTION "A"-"A"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 1
DECIMALS
ANGLES
THROUGH HOLE
-01, -11, -21, -31
"C"±.003[0.08]
(SEE TABLE 1, SHT 3)
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR:
LCP, UL 94-V0
COLOR: BLACK
.050 X .050 TERMINAL STRIP
DWG. NO.
IN-PROCESS
TFC-1XX-XX-XX-D-XX
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\TFC-1XX-XX-XX-D-XX-MKT.SLDDRW
SHEET 1 OF
BY: BRATCHER 05/25/2001
4
"J"±.006[0.15]
(SEE TABLE 1, SHT 3)
NOTE: "R" = OVERALL LENGTH (REF)
"S" = {("R" - .216[5.49] /2} ±.020[.51]
REVISION AK
"B"
"B"
.005±.020 0.11±0.508
.216 5.49
3
2
7
"E"
(SEE TABLE 1,
SHT 3)
SEE NOTE 6
SEE NOTE 9
FLUSH TO .012 [0.30] MAX
(SEE NOTE 7)
(-12, -22 & -32 STYLES)
3
(-02 STYLE ONLY)
3
MAX SWAY
"S"
SEE NOTE 10
.235 5.97 MAX
(EITHER DIRECTION)
(SEE NOTE)
01 03
"E"
"R"
(SEE TABLE 1,
SHT 3)
SECTION "B"-"B"
(SEE NOTE)
02
SEE NOTE 10
(No. OF POSITIONS x .050) -.050[1.27]
(TOL ACCUM ±.005[0.13] OVER 50 POS)
FIG 2
SURFACE MOUNT
-02, -12, -22, -32
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
FIG 3
-K: POLYIMIDE FILM PAD
NOTCH TO BE
"A" REF
(SEE TABLE 1,
SHT 3)
TERMINAL 2
ORIENTED AS SHOWN
(SEE TABLE 1, SHT 3)
"C"
02
01
TERMINAL 1
(SEE TABLE 1, SHT 3)
.075 1.91 REF
"C"
.014 0.36
REF (TYP)
.020 0.51
(SEE NOTE 8)
2
MAX SWAY
(EITHER DIRECTION)
90°
.050 1.27
(SEE NOTE 8)
FIG 8
SECTION "C"-"C"
-RA OPTION
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
.422 10.72
"A" REF
(SEE TABLE 1,
SHT 3)
.422 10.72
TERMINAL 2
(SEE TABLE 1,
SHT 3)
TERMINAL 2
(SEE TABLE 1,
SHT 3)
F:\DWG\MISC\MKTG\TFC-1XX-XX-XX-D-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
TERMINAL 1
(SEE TABLE 1,
SHT 3)
*
*
.075 1.91 REF
PROPRIETARY INFORMATION AND ALL DESIGN,
CARRIER STRIP
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TERMINAL 1
(SEE TABLE 1, SHT 3)
I.D. MARK
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
90°
.020 0.51
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 TERMINAL STRIP
IN-PROCESS 1
(ORIENT I.D. MARK AS SHOWN)
(FOR -RA OPTION ONLY)
DWG. NO.
IN-PROCESS 2
TFC-1XX-XX-XX-D-XX
SHEET 2 OF
BY: BRATCHER 05/25/2001
4
REVISION AK
"M"
(SEE NOTE)
"P"
(SEE NOTE)
.045 1.14
REF
(No. OF POSITIONS x .050[1.27]) + .075[1.91]
.050 1.27
REF
R.025 [0.64] REF
.394 10.01
REF
*PPP-04
FIG 5
-A OPTION
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
.225 5.72
REF
.050 1.27
C
L
"E"
"E"
.050 1.27
LC-05-TM
C
L
SECTION "E"-"E"
.056 1.42 REF
MAX SWAY
2
MAX SWAY
.010 0.25 REF
(EITHER DIRECTION)
2
(EITHER DIRECTION)
NOTE: "M" = (No. OF POS X .050[1.27]) + .125[3.18] (REF)
"P" = {(“M” - .394[10.01]) /2} ±.020[.51]
((No. OF POSITIONS x .050[1.27]) + .075[1.91])±.002[0.05]
* NOTCH ON PAD TO BE ON SAME END
AS THE NOTCH IN THE TFM BODY
FIG 6
-LC OPTION
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(NOT AVAILBLE ON -RA)
FIG 7
-P OPTION
F:\DWG\MISC\MKTG\TFC-1XX-XX-XX-D-XX-MKT.SLDDRW
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
(PAD TO BE POSITIONED ON CL AS SHOWN)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 TERMINAL STRIP
DWG. NO.
TFC-1XX-XX-XX-D-XX
SHEET 3 OF
BY: BRATCHER 05/25/2001
4
REVISION AK
ROUND HOLES
PART NOTCH
LOADING DIRECTION ARROW
POLARIZATION NOTCH
PT-1-24-18-09
(SEE TABLE 2)
OBLONG HOLES
FIG 9
PT-1-24-XX-09
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
FIG 4
-TR: TAPE AND REEL
LOADING DIRECTION ARROW
POLARIZATION NOTCH
PT-1-24-05-17
(SEE TABLE 2)
FIG 10
PT-1-24-05-17
NOTE:
LOADING DIRECTION ARROW
POLARIZATION NOTCH
PARTS TO BE PACKAGED WITH THE LOADING DIRECTION ARROW
POINTED IN SAME DIRECTION AS THE ARROW ON TUBE.
F:\DWG\MISC\MKTG\TFC-1XX-XX-XX-D-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PT-FTSH002-DV-A-P-M
(SEE TABLE 2)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 TERMINAL STRIP
DWG.
NO. TFC-1XX-XX-XX-D-XX
FIG 11
PT-FTSH002-DV-A-P-M
SHEET 4 OF
BY: BRATCHER 05/25/2001
4
相关型号：
TFC-120-12-F-D-A-K
Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
TFC-120-12-FM-D
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
SAMTEC
TFC-120-12-LM-D
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
SAMTEC
TFC-120-21-FM-D
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
SAMTEC
TFC-120-21-L-D-A
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, ROHS COMPLIANT
SAMTEC
TFC-120-21-L-D-LC
Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Locking, Black Insulator
SAMTEC
TFC-120-21-L-D-TR
Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Locking, Black Insulator
SAMTEC
TFC-120-22-F-D-A
Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明