TFDS-30-30-GF-03.25-D-NUS

更新时间:2024-10-30 04:27:26
品牌:SAMTEC
描述:Interconnection Device

TFDS-30-30-GF-03.25-D-NUS 概述

Interconnection Device

TFDS-30-30-GF-03.25-D-NUS 数据手册

通过下载TFDS-30-30-GF-03.25-D-NUS数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
REVISION A  
TFSD-XX-XX-XX-XX.XX-X-XXX  
No OF POSITIONS  
.110 2.79  
REF  
-NXX OPTION (END 2)  
(ONLY AVAILABLE WITH -D OR -T)  
A
-02 THRU -030 (PER ROW)  
-05, -07, -10, -15, -20, -25 & -30  
AVAILABLE AS STANDARD  
(No OF POS x .050[1.27])  
+ .100[2.54] REF  
-NUS: NOTCH UP, STRAIGHT  
(PIN 1 TO PIN 2)  
-NDS: NOTCH DOWN, STRAIGHT  
(PIN 1 TO PIN N-1)  
(ALL OTHER SIZES AVAILABLE AS ASO)  
N-1 (SEE TABLE 2)  
-NUX: NOTCH UP, CROSSED  
(PIN 1 TO PIN 1)  
-NDX: NOTCH DOWN, CROSSED  
(PIN 1 TO PIN N)  
01  
.153 3.89  
REF  
WIRE GAUGE (AWG)  
DO NOT  
SCALE FROM  
THIS PRINT  
C
L
-28  
-30  
.240 6.10  
REF  
.225 5.72  
REF  
PLATING SPECIFICATION  
END OPTION  
-H: HEAVY GOLD (USE DWL-09-XX-X-XX.XX-H)  
-G: LIGHT GOLD (USE DWL-09-XX-X-XX.XX-G)  
-GF: FLASH GOLD (USE DWL-09-XX-X-XX.XX-GF)  
-S: SINGLE END (USE DWL-09-XX-S-XX.XX-XX)  
-D: DOUBLE END (USE DWL-09-XX-D-XX.XX-XX)  
(MUST CHOOSE FROM -NXX OPTIONS)  
-T: TRANSFER END (SEE SHEET 4)  
(USE DWL-09-XX-T-XX.XX-XX)  
(MUST CHOOSE FROM -NXX OPTIONS)  
02  
N (SEE TABLE 2)  
.375 9.53  
REF  
.050 1.27  
REF  
FIG. 1  
-S: SINGLE END  
ASSEMBLED LENGTH  
(TFSD-07-28-XX-XX.XX-S SHOWN)  
TFSD-XX-D-S  
"A"  
SPECIFY IN INCHES [USE DWL-09-XX-X-XX.XX-XX]  
(SINGLE END: 03.00 INCH [76.2mm] MINIMUM,  
DOUBLE END: 03.25 INCH [82.6mm] MINIMUM)  
.562 14.26  
REF  
.238 6.05  
REF  
ASSEMBLED LENGTH:  
XX.XX .125[3.18]  
C1  
DWL-09-XX-XX-S-XX.XX-XX  
SECTION "A"-"A"  
"A"  
NOTES:  
C
PROPRIETARY NOTE  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
TOLERANCES ARE:  
1.  
REPRESENTS A CRITICAL DIMENSION.  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
2. MINIMUM PULLOUT FORCE: 3 LBS [13.3 N].  
3. CONTACT MUST BE INSERTED UNTIL  
RETENTION FEATURE LOCKS INTO PLACE.  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
DECIMALS  
ANGLES  
2
.XX: .01 [.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
4. ALL FINISHED GOODS ARE TO BE ELECTICAL  
TESTED INCLUDING HI-POT TEST AT 300 V.  
C7  
C8  
.XXX: .005 [.13]  
.XXXX: .0020 [.051]  
5. TINNED COPPER WIRE IS RoHS COMPLIANT.  
6. PARTS TO BE LAYER PACKAGED.  
SHEET SCALE: 2:1  
DO NOT SCALE DRAWING  
DESCRIPTION:  
MATERIAL:  
7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP.  
8. SEE DWL-09-XX-X-XX.XX-XX FOR CRIMP DIMENSIONS.  
9. NOTE DELETED  
.050[2.54] SOCKET DISCREET CABLE ASSEMBLY  
INSULATOR: LCP, COLOR: BLACK  
CONTACT: BeCu  
CABLE INSULATION: PVC  
WIRE: TINNED COPPER  
DWG.  
TFNSOD. -XX-XX-XX-XX.XX-X-XXX  
10. END OF DISCRETE WIRE MUST BE IN RANGE AFTER CRIMP.  
A 11. COLOR CODED WIRE AVAILABLE IN ALL GAUGES, CALL SAMTEC  
LENNY K  
7/18/06  
SHEET 1 OF 4  
BY:  
F:\DWG\MISC\MKTG\TFSD-XX-XX-XX-XX.XX-X-XXX-MKT.SLDDRW  
REVISION A  
FIG.3  
FIG. 2  
-T:TRANSFER END  
-D: DOUBLE END  
(TFSD-07-28-X-XX.XX-T-NUS SHOWN)  
(TFSD-07-28-X-XX.XX-D-NUS SHOWN)  
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)  
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)  
TFSD-XX-D-S  
C6  
C2  
ASSEMBLED LENGTH:  
XX.XX .125[3.18]  
ASSEMBLED LENGTH:  
XX.XX .125[3.18]  
ISDF-XX-D  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050[2.54] SOCKET DISCREET CABLE ASSEMBLY  
DWG. NO.  
TFSD-XX-XX-XX-XX.XX-X-XXX  
F:\DWG\MISC\MKTG\TFSD-XX-XX-XX-XX.XX-X-XXX-MKT.SLDDRW  
BY:  
LENNY K  
7/18/06  
SHEET 2 OF 4  
REVISION A  
(SEE TABLE 2)  
(SEE TABLE 2)  
N-1  
N
01  
02  
(SEE TABLE 2)  
02  
01  
02  
01  
N
N-1  
01  
02  
N
N-1  
N
N-1  
(SEE TABLE 2)  
NOTCH END 2  
NOTCH END 2  
NOTCH END 1  
-NDS  
(END 2 NOTCH DOWN, CABLE STRAIGHT)  
(PIN 1 TO PIN N-1)  
NOTCH END 1  
-NUS  
(END 2 NOTCH UP, CABLE STRAIGHT)  
(PIN 1 TO PIN 2)  
(SEE TABLE 2)  
(SEE TABLE 2)  
N-1  
N
01  
02  
(SEE TABLE 2)  
02  
N
N-1  
02  
01  
01  
01  
02  
N
N-1  
N
N-1  
(SEE TABLE 2)  
NOTCH END 2  
NOTCH END 1  
NOTCH END 2  
-NDX  
(END 2 NOTCH DOWN, CABLE CROSSED)  
(PIN 1 TO PIN N)  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
NOTCH END 1  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
-NUX  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
(END 2 NOTCH UP, CABLE CROSSED)  
(PIN 1 TO PIN 1)  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 1.75:1  
.050[2.54] SOCKET DISCREET CABLE ASSEMBLY  
DWG. NO.  
TFSD-XX-XX-XX-XX.XX-X-XXX  
F:\DWG\MISC\MKTG\TFSD-XX-XX-XX-XX.XX-X-XXX-MKT.SLDDRW  
BY:  
LENNY K  
7/18/06  
SHEET 3 OF 4  
REVISION A  
(SEE TABLE 2)  
(SEE TABLE 2)  
N-1  
N
01  
02  
(SEE TABLE 2)  
01  
02  
02  
01  
N
N-1  
01  
02  
N
N-1  
N
N-1  
(SEE TABLE 2)  
NOTCH END 2  
NOTCH END 2  
NOTCH END 1  
T-NDS  
(END 2 NOTCH DOWN, CABLE STRAIGHT)  
(PIN 1 TO PIN N-1)  
A
NOTCH END 1  
T-NUS  
(END 2 NOTCH UP, CABLE STRAIGHT)  
A
(PIN 1 TO PIN 2)  
(SEE TABLE 2)  
(SEE TABLE 2)  
N
N-1  
01  
02  
(SEE TABLE 2)  
01  
02  
02  
N
N-1  
01  
01  
02  
N
N-1  
N
N-1  
(SEE TABLE 2)  
NOTCH END 2  
NOTCH END 1  
NOTCH END 2  
T-NDX  
(END 2 NOTCH DOWN, CABLE CROSSED)  
(PIN 1 TO PIN N)  
A
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
NOTCH END 1  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
T-NUX  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
(END 2 NOTCH UP, CABLE CROSSED)  
(PIN 1 TO PIN 1)  
A
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050[2.54] SOCKET DISCREET CABLE ASSEMBLY  
TFNSOD. -XX-XX-XX-XX.XX-X-XXX  
DWG.  
F:\DWG\MISC\MKTG\TFSD-XX-XX-XX-XX.XX-X-XXX-MKT.SLDDRW  
SHEET 4 OF 4  
BY:  
LENNY K  
7/18/06  

TFDS-30-30-GF-03.25-D-NUS 相关器件

型号 制造商 描述 价格 文档
TFDS-30-30-GF-03.25-D-NUX SAMTEC Interconnection Device 获取价格
TFDS-30-30-GF-03.25-T-NDX SAMTEC Interconnection Device 获取价格
TFDS-30-30-GF-03.25-T-NUS SAMTEC Interconnection Device 获取价格
TFDS-30-30-GF-03.25-T-NUX SAMTEC Interconnection Device 获取价格
TFDS-30-30-H-03.25-D-NDX SAMTEC Interconnection Device 获取价格
TFDS-30-30-H-03.25-D-NUS SAMTEC Interconnection Device 获取价格
TFDS-30-30-H-03.25-D-NUX SAMTEC Interconnection Device 获取价格
TFDS-30-30-H-03.25-T-NDX SAMTEC Interconnection Device 获取价格
TFDS-30-30-H-03.25-T-NUX SAMTEC Interconnection Device 获取价格
TFDS3000 TEMIC Integrated Infrared Transceiver Module IrDA (SIR) 获取价格

TFDS-30-30-GF-03.25-D-NUS 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8