TFM-125-02-F-S [SAMTEC]

Board Connector, 25 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal,;


型号：	TFM-125-02-F-S
厂家：	SAMTEC
描述：	Board Connector, 25 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, PC 连接器
文件：	总3页 (文件大小：216K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOTES:

TFM-1XX-XX-X-S-XX

REVISION Z

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE TO BE 16 OZ FOR TERMINALS, 12 OZ FOR WELD TABS,

AND 8 OZ FOR LOCKING CLIPS.

OPTION

No OF POSITIONS

ALL POSITIONS AVAILABLE

-02 THRU -50

-A: ALIGNMENT PIN (USE TFM-XX-S-01-A)

(NOT AVAILABLE WITH -WT OPTION)

(SEE FIG. 5 SHEET 2)

3. MEASURED FROM BEND.

4. MAXIMUM TERMINAL BURR: .003 [.08]

5. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005 [.13]

6. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

-LC: LOCKING CLIP (USE LC-05-TM)

(NOT AVAILABLE WITH -WT OPTION)

(SEE FIG. 7 SHEET 3) (SEE NOTE 6)

-P: PICK AND PLACE PAD (USE PPP-15)

(SEE FIG. 6 SHEET 2)

LEAD STYLE

-01: T-1R16-01-X-2

THROUGH HOLE

-02: T-1R16-01-X-2

SURFACE MOUNT

(NOT AVAILABLE -03, -04 & -05 POSITIONS)

-K: POLYIMIDE FILM (SEE FIG. 3 SHEET 2)

(USE K-500-300)

-03: T-1R16-10-X

-WT: WELD TABS (USE WT-25-07-T)

(SEE FIG. 4 SHEET 2)

THROUGH HOLE

(AVAILABLE ON -02 THRU -30 POS ONLY)

(NOT AVAILABLE WITH

PLATING SPECIFICATIONS

-A OR -LC OPTIONS)

-TR: TAPE & REEL

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(SEE SHEET 3, TAPE AND REEL VIEW)

-SN: SOLDER NAIL (USE WT-27-03)

(NOT AVAILABLE WITH -A, -LC, OR

-WT OPTIONS) (SEE FIG. 8 SHEET 3)

((No. OF POSITIONS x .050[1.27])

+ .125[3.18])REF

-F: 3µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-P: 3µ" GOLD PALLADIUM NICKEL IN CONTACT

AREA, MATTE TIN ON TAIL

((No. OF POSITIONS x .050[1.27])

+ .025[.64])REF

BODY SPECIFICATION

-S: SINGLE ROW

(USE TFM-XX-S-XX-XX)

-L: 10µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.100 2.54 REF

.105 2.67 REF

* NOT RELEASED FOR PRODUCTION

** NOT TOOLED

.065 1.65

.083 2.11

.050 1.27 REF

.175 4.45 REF

2 MAX TOE

(TYP)

.018 0.46

"A"

MAX SWAY

(TYP)

.1635 4.153 REF

"B" REF

.2200 5.588

.010 0.25 REF

"A"

"C"

MAX SWAY (TYP)

.014 0.36 REF

MAX TOE (TYP)

((No. OF POSITIONS x .050[1.27])

- .050[1.27])

SECTION "A"-"A"

TABLE 1

ALLOWABLE COPLANARITY

POSITIONS

-02 THRU -29

-030 THRU -39

-40 THRU -50

IN-PROCESS

FIGURE 1

CPC

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

.004 MAX

.006 MAX

.008 MAX

(TFM-115-01-X-S-XX SHOWN)

FREQUENCY

THIS SHEET

DECIMALS

ANGLES

C1, C2

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXX: .005 [.13]

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

.XXXX: .0020 [.051]

e-Mail info@SAMTEC.com

C3, C4, C5,

TABLE 2

"A"

0.075 [1.91]

N/A

SHEET SCALE: 1:0.4

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

LEAD STYLE

BODY

"B"

"C"

INSULATOR: LIQUID CRYSTAL POLYMER, COLOR: BLACK

TERMINAL: PHOSPHOR BRONZE

.050 C.L. SINGLE ROW SHROUDED TERMINAL STRIP

DWG. NO.

-01

-02

-03

TFM-XX-S-XX-XX

0.133 [3.38] 0.4285 [10.884]

0.140 [3.56]

TFM-1XX-XX-X-S-XX

0.109 [2.77]

0.644 [16.36]

8/21/2008 SHEET 1 OF 3

BY: D. SCHMELZ

F:\DWG\MISC\MKTG\TFM-1XX-XX-X-S-XX-MKT.SLDDRW

FIGURE 3

FIGURE 2

SURFACE MOUNT

-K: POLYIMIDE FILM PAD

(TFM-115-02-X-S-K SHOWN)

REVISION Z

(TFM-115-02-X-S-XX SHOWN)

.021±.010 0.52±0.254

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1

.216±.005 5.49±0.13

2 MAX TOE

(TYP)

"B"

90°

+.005

5.70^+0.127

"S"

.225

-.000

0.000

.230 5.83

"R"

SEE TABLE 1

NOTE: “R” = OVERALL LENGTH REF

“S” = ((“R” - .216[5.49]) /2) ±.020[.51]

"B"

FLUSH TO .005 0.12 MAX

(SEE NOTE 3)

FIGURE 5

-A OPTION

MAX SWAY

(TYP)

(TFM-115-02-X-S-A SHOWN)

.185 4.70 REF

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)

.045 1.14 REF

SECTION "B"-"B"

((No. OF POSITIONS x .050[1.27]) -.050[1.27])

(TOL ACCUM ±.005[.13] OVER 50 POS.)

.050 1.27

REF

((No. OF POSITIONS x .050[1.27])

+ .075[1.91])

R.025 0.64

FIGURE 4

-WT OPTION

FIGURE 6

-P OPTION

"M"

(TFM-115-01-X-S-WT SHOWN)

(TFM-115-02-X-S-P SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)

(PAD TO BE POSITIONED ON C.L. AS SHOWN)

"P"

((NO OF POSITIONS X .050[1.27])

+.263[6.68]) REF

TFM-XX-S-01-WT

.093 2.36 (TYP)

.375 9.53

REF

WT-25-07-T

.175 4.45

REF

"D"

PPP-15

.050 1.27

"E"

.010 0.25

REF (TYP)

.025 0.64

REF

"D"

SECTION "E"-"E"

NOTE: “M” = (No. OF POSITIONS X .050[1.27]) + .125[3.18] REF

WITH -WT “M” = (No. OF POSITIONS X .050[1.27]) + .263[6.68] REF

“P” = ((“M” - .375[9.53]) /2) ±.020[.51]

MAX SWAY (TYP)

SECTION "D"-"D"

CPC

PROPRIETARY NOTE

((No. OF POSITIONS x .050[1.27])

+ .154[3.91])

FREQUENCY

THIS SHEET

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

C7, C8, C9,

C10, C11,

C12

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.050 C.L. SINGLE ROW SHROUDED TERMINAL STRIP

DWG. NO.

TFM-1XX-XX-X-S-XX

D. SCHMELZ 8/21/2008 SHEET 2 OF

F:\DWG\MISC\MKTG\TFM-1XX-XX-X-S-XX-MKT.SLDDRW

BY:

REVISION Z

TAPE AND REEL VIEW

FIGURE 8

PT-1-24-11-09

-SN OPTION

(TFM-110-02-X-S-SN SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)

POSITION 01

(No OF POSITIONS x .050[1.27]) + .255 REF

FLUSH TO .005 0.13

ABOVE

"G"

"F"

WT-27-03-X

USER DIRECTION OF UN-REELING

POCKET NOT DETAILED

"G"

.075 1.91

REF

(No. OF POSITIONS x .050[1.27])

+.175[4.45]

PACKAGING TUBE VIEW

.026 0.66 REF

(2 PLCS)

MAX SWAY (TYP)

NOTES:

SECTION "G"-"G"

SCALE 3 : 1

1. USE PT-1-24-11-09 TUBE

AND (2) TP-24 FOR -A, -LC, WT,

AND -SN OPTIONS.

2. USE PT-1-24-03-09 TUBE AND

(2) TP-09 FOR -P AND -K OPTIONS.

3. LOAD TUBE WITH 1ST POSITION

IN SAME DIRECTION AS ARROW

SECTION "F"-"F"

SCALE 1.25 : 1

** NOT TOOLED

FIGURE 7

-LC OPTION

(TFM-115-01-X-S-LC SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 2)

TFM-1XX-02-S-LC

.050 1.27

LC-05-TM

.056 1.42 REF

MAX SWAY (TYP)

.010 0.25 REF

MAX SWAY (TYP)

* INSPECT ONLY WHEN APPLICABLE WITH RESPECT TO ASSEMBLY OPTION

CPC

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

FREQUENCY

THIS SHEET

((No. OF POSITIONS x .050[1.27])

+ .075[1.91])±.002[.05]

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

e-Mail info@SAMTEC.com

C13

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.050 C.L. SINGLE ROW SHROUDED TERMINAL STRIP

DWG. NO.

TFM-1XX-XX-X-S-XX

8/21/2008 SHEET 3 OF

F:\DWG\MISC\MKTG\TFM-1XX-XX-X-S-XX-MKT.SLDDRW

BY: D. SCHMELZ

TFM-125-02-F-S [SAMTEC]

相关型号：

TFM-125-02-F-S-K

TFM-125-02-F-S-LC

TFM-125-02-F-S-P

TFM-125-02-F-S-SN

TFM-125-02-F-S-TR

TFM-125-02-F-S-WT

TFM-125-02-FM-D

TFM-125-02-FM-D-LC

TFM-125-02-FM-D-P-WT

TFM-125-02-FM-D-TR

TFM-125-02-G

TFM-125-02-G-D