TFSD-20-28-H-25.00-S [SAMTEC]
Board Connector, 40 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT;
| 型号： | TFSD-20-28-H-25.00-S |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 40 Contact(s), 2 Row(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT 连接器 |
| 文件： | 总5页 (文件大小：914K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
REVISION S
FEP CABLE OPTION
.110 2.79
REF
-T: FEP
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D,-DL,-T,-TF,TR)
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
No OF POSITIONS
-02 THRU -50 (PER ROW)
DO NOT
SCALE FROM
THIS PRINT
(No OF POS x .050[1.27])
+ .120[2.54] REF
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO PIN 2)
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO PIN N-1)
-02, -04, -05, -07, -10, -15, -20, -25, -30, -35,
-40, -45 & -50 AVAILABLE AS STANDARD
(ALL OTHER SIZES AVAILABLE AS ASO)
N (SEE TABLE 2)
-NUX: NOTCH UP, CROSSED
(PIN 1 TO PIN 1)
02
C
L
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO PIN N)
WIRE GAUGE (AWG)
-28, -30
COLOR CODE
.153 3.89
REF
.240 6.10
REF
.225 5.72
REF
END OPTION
LEAVE BLANK FOR ALL BLACK WIRE,
C: COLOR CODED WIRE, SEE COLOR
SEQUENCE TABLE, SHEET 2
-S: SINGLE END (USE DWLX-09-XX-S-XX.XX-XX)
-SL: SINGLE END WITH FRICTION LOCK
***
01
N-1 (SEE TABLE 2)
(USE DWLX-09-XX-S-XX.XX-XX)(SEE SHEET 2, FIG 4)
** -D: DOUBLE END (USE DWLX-09-XX-D-XX.XX-XX)
(SEE SHEET 2, FIG 2)
(NOT AVAILABLE WITH FEP OPTION)
.375 9.53
REF
.050 1.27
REF
PLATING SPECIFICATION
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
FIG 1
** -T: TRANSFER END (USE DWLX-09-XX-T-XX.XX-XX)
(SEE SHEET 2, FIG 3 AND SHEET 4)
-S: SINGLE END
3µ" GOLD ON TAIL
"A"
(TFSDX-07-28-XX-XX.XX-S SHOWN)
** -DL: DOUBLE END WITH FRICTION LOCK
***
(USE DWLX-09-XX-X-XX.XX-H)
-G: 10µ" LIGHT GOLD IN CONTACT AREA,
10µ" GOLD ON TAIL ON TAIL
(USE DWLX-09-XX-X-XX.XX-G)
-F: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE DWLX-09-XX-X-XX.XX-GF)
-GF: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE DWLX-09-XX-D-XX.XX-XX)
(SEE SHEET 2, FIG 5)
** -TF: TRANSFER END WITH FRICTION LOCK
***
TFSD-XX-D-S
(USE DWLX-09-XX-T-XX.XX-XX)
(SEE SHEET 2, FIG 6)
.562 14.26
REF
** -TR: TRANSFER END W/RETENTION LATCH(SEE
SHEET 5)(USE DWLX-09-XX-T-XX.XX-XX)(MUST
CHOOSE FROM -NXX OPTIONS)(ONLY
AVAILABLE IN -05 THRU -50 POS)
.238 6.05
REF
(USE DWLX-09-XX-X-XX.XX-GF)
(-GF ONLY AVAILABLE TO EXISTING CUSTOMERS,
SEE –F PLATING)
ASSEMBLED LENGTH
SPECIFY IN INCHES [USE DWLX-09-XX-X-XX.XX-XX]
(SINGLE END: 03.00 INCH [76.2mm] MINIMUM,
DOUBLE END: 03.25 INCH [82.6mm] MINIMUM)
TABLE 2
No OF
XX.XX
(SEE NOTE 12)
C
** MUST CHOOSE FROM -NXX OPTIONS
N
N-1
POSITIONS
-05
*** ONLY AVAILABLE ON POS 5, 7, & 10 - 50
10 09
14 13
20 19
30 29
40 39
50 49
60 59
-07
-10
-15
-20
-25
-30
TABLE 1
SERIES
TFSD
TFSD
WIRE GAUGE
28 AWG
30 AWG
WIRE
PIN
DWLX-09-XX-XX-S-XX.XX-XX
DWL-09-28-XX-XX.XX-X T-1M44-2830-XX
DWL-09-30-XX-XX.XX-X T-1M44-2830-XX
SECTION "A"-"A"
"A"
NOTES:
TFSDT
28 AWG
DWLT-09-28-XX-XX.XX-X T-1M44-2830-XX
DWLT-09-30-XX-XX.XX-X T-1M44-2830-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
TFSDT
30 AWG
2. MINIMUM PULLOUT FORCE: 3 LBS [13.3 N].
3. CONTACT MUST BE INSERTED UNTIL
RETENTION FEATURE LOCKS INTO PLACE.
C
C
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
4. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING HI-POT TEST AT 300 V.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP.
8. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, AND TOOLING.
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
9. NOTE DELETED.
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCu
CABLE INSULATION: SEE CALLOUT
WIRE: 28 OR 30 AWG, TINNED OR SILVER
PLATED COPPER
10. NOTE DELETED.
11. NOTE DELETED.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
12. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL
BE ±.125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE ±2%.
LENNY K
7/18/06
SHEET 1 OF 5
BY:
REVISION S
FIG 3
FIG 2
FIG 4
FIG 6
FIG 5
-T:TRANSFER END
-D: DOUBLE END
-SL: SINGLE END WITH FRICTION LOCK
-TF: TRANSFER END WITH FRICTION LOCK
-DL: DOUBLE END WITH FRICTION LOCK
(TFSDX-07-28-XX-XX.XX-T-NUS SHOWN)
(TFSDX-07-28-XX-XX.XX-D-NUS SHOWN)
(TFSDX-07-28-XX-XX.XX-SL SHOWN)
(TFSDX-07-28-XX-XX.XX-TF-NUS SHOWN)
(TFSDX-07-28-XX-XX.XX-DL-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
TFSD-XX-D-S
TFSD-XX-D-S-L
TFSD-XX-D-S-L
TFSD-XX-D-S-L
XX.XX
(SEE NOTE 12)
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
C
2.107 53.52
(SEE NOTE 12)
XX.XX
(SEE NOTE 12)
C
C
ISDF-XX-D
ISDF-XX-D-L
TFSD-XX-D-S-L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
LENNY K
7/18/06
SHEET 2 OF 5
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REVISION S
(SEE TABLE 2)
(SEE TABLE 2)
01
02
N-1
N
(SEE TABLE 2)
N
N-1
N-1
01
N
02
01
N-1
N
02
02
01
(SEE TABLE 2)
NOTCH END 2
NOTCH END 2
NOTCH END 1
-NDS
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN N-1)
NOTCH END 1
-NUS
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN 2)
(SEE TABLE 2)
(SEE TABLE 2)
N-1
01
02
N
(SEE TABLE 2)
N
02
01
N-1
N-1
N
N
N-1
01
02
02
01
(SEE TABLE 2)
NOTCH END 2
NOTCH END 1
-NDX
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN N)
NOTCH END 2
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
NOTCH END 1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
-NUX
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN 1)
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.75:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
LENNY K
7/18/06
SHEET 3 OF 5
REVISION S
(SEE TABLE 2)
(SEE TABLE 2)
N-1
N
(SEE TABLE 2)
01
02
N
N-1
01
N
N-1
02
02
01
02
01
N
N-1
(SEE TABLE 2)
NOTCH END 2
NOTCH END 2
NOTCH END 1
T-NDS
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN 1)
T-NUS
NOTCH END 1
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN N)
(SEE TABLE 2)
(SEE TABLE 2)
N-1
N
N
N-1
01
02
(SEE TABLE 2)
01
02
N
02
01
N-1
NOTCH END 2
02
01
N
N-1
(SEE TABLE 2)
NOTCH END 1
NOTCH END 2
T-NDX
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN 2)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
NOTCH END 1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
T-NUX
e-Mail info@SAMTEC.com
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN N-1)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
TFSNDO.X-XX-XXX-XX-XX.XX-XX-XXX
DWG.
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
SHEET 4 OF 5
BY:
LENNY K
7/18/06
REVISION S
FIG 7
FIG 9
FIG 10
FIG 8
-TR: TRANSFER END WITH RETENTION LATCH
-TR: TRANSFER END WITH RETENTION LATCH
-TR: TRANSFER END WITH RETENTION LATCH
-TR: TRANSFER END WITH RETENTION LATCH
(TFSDX-07-28-XX-XX.XX-TR-NUS SHOWN)
(TFSDX-07-28-XX-XX.XX-TR-NDX SHOWN)
(TFSSX-07-28-XX-XX.XX-TR-NUX SHOWN)
(TFSDX-07-28-XX-XX.XX-TR-NDS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
TFSD-XX-D-S
TFSD-XX-D-S
TFSD-XX-D-S
TFSD-XX-D-S
XX.XX
XX.XX
(SEE NOTE 12)
XX.XX
(SEE NOTE 12)
XX.XX
(SEE NOTE 12)
(SEE NOTE 12)
C
C
C
C
ISDF-XX-D-R
ISDF-XX-D-R
ISDF-XX-D-R
ISDF-XX-D-R
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
LENNY K
7/18/06
SHEET 5 OF 5
相关型号：
©2020 ICPDF网 联系我们和版权申明