概述
数据手册TSM-105-01-S-DV-LC-010-P 概述
.025 SQ. TERMINAL STRIPS
TSM-105-01-S-DV-LC-010-P 数据手册
通过下载TSM-105-01-S-DV-LC-010-P数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载NOTES:
REVISION DR
TSM-1XX-XX-XXX-XX-X-XXX-X
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM POST HEIGHT VARIATION: .005[0.13].
3. LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW.
4. TUBE POSITIONS 03 THRU 50.
OPTION #3
No OF POSITIONS
-02 THRU -50
(NOT AVAILABLE WITH -TV & -TM MOUNT STYLES)
-P: PICK AND PLACE PAD
DO NOT
SCALE FROM
THIS PRINT
5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY.
LEADS MAY NOT BE VISIBLE FOR CUSTOMER'S VISUAL
INSPECTION ON SMALLER POSITIONED PARTS WHEN USED
WITH THE -P OR -M OPTIONS.
(POS -04 THRU -36, 50 USE PPP-06,
SEE FIG4, SHT 2)
LEAD STYLE
(SEE TABLE 1)
(POS -02, USE PPP-81, SEE FIG 9, SHT 2)
(POS -03, USE PPP-86, SEE FIG 10, SHT 2)
(AVAILABLE ON POS -02 & -03 WITH -TR & -FR OPTION ONLY)
-M: METAL PICK AND PLACE PAD
6. MEASURE AT BEND RADIUS.
7. MINIMUM PUSHOUT FORCE: 3 LBS.
8. FOR -TV USE T-31724-01.
PLATING SPECIFICATION
*
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
* FOR EXISTING CUSTOMERS ONLY
(USE LMP-01, SEE FIG 5, SHT 2)
-T: MATTE TIN ON ENTIRE PIN.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(NOT RECOMMENDED WITH -T OR -TM PLATING)
(LEAD STYLES -01 & -04 ONLY)
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH
SSM, SSW, SSQ, BCS, ESW AND ESQ.
(AVAILABLE ON POS 04 THRU 36)
(AVAILABLE ON POS 02 AND 03 WITH -TR & -FR
OPTION ONLY, SEE NOTE 5)
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
11. MAXIMUM ALLOWABLE CUT FLASH .010[0.25],
.015[0.38] ALLOWED TOWARDS TAILS.
-TR: TAPE AND REEL (SEE FIG 8, SHT 3)
(02 THRU 28 POS)
-TL: TIN/LEAD (90/10) ON ENTIRE PIN.
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10) ON TAIL.
12. THIS DIMENSION TO BE MEASURED RELATIVE TO DATUM -Z-.
13. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,
BASED ON OPTIONS SELECTED.
-FR: FULL REEL QTY. TAPE & REEL (SEE FIG 8, SHT 3)
(02 THRU 28 POS)(SEE NOTE 13)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
OPTION #2
-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
POLARIZED POSITION
SPECIFY OMITTED PIN
-TM: MATTE TIN ON ENTIRE PIN.
OPTION #1
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(AVAILABLE FOR -DV MOUNT STYLE ONLY)
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
(USE LC-05-TM)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(-03 THRU -36 POS, USE 2 PER STRIP)
(-02 POS, USE 1 PER STRIP)
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
C
(USE RTSM-XX-DVU)
-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL. (SEE NOTE 10)
+.000[0.00]
-.015[0.38]
(SEE NOTE 9)
(NO OF POS x .100[2.54])
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY)
(FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN)
(LEAVE BLANK FOR NO HOLD DOWN OPTION)
USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION)
(NO OF POS -1) x .100[2.54]
C
RTSM-50-DVU
02
C
MOUNT STYLE
-DV: DOUBLE VERTICAL
"C" MAX
(SEE TABLE 1)
.200 5.08
-TV: TRIPLE VERTICAL (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, SEE NOTE 8)
*
REF
-TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY)
2
MAX SWAY
01 03
(EITHER DIRECTION)
5
MAX SWAY
* = FOR EXISTING CUSTOMERS ONLY
(EITHER DIRECTION)
.100 2.54
.025 0.64 SQ
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
C
C
C
"B"
"B"
(SEE TABLE 1
& NOTE 2)
(SEE TABLE 1
& NOTE 2)
C
3° (SEE NOTE 12)
.100 2.54 REF
-Z-
SEE TABLE 5
C
.050±.010 1.27±0.25
(TYP)(SEE NOTE 6)
FIG 1
TSM-1XX-XX-XXX-DV SHOWN
IN-PROCESS
5° (SEE NOTE 12)
-DV MOUNT STYLE
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL94VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
DOUBLE ROW GULLWING ASM
DWG. NO.
TSM-1XX-XX-XXX-XX-X-XXX-X
BY:
BRYANT
04/24/1991 SHEET 1 OF 3
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
REVISION DR
.045 1.14
REF
(SEE TABLE 3)
.110 2.79
"A"
LC-05-TM
.063 1.59 REF
.047 1.19 REF
(NO OF POS -2) x .100[2.54]
2
MAX SWAY
(NO OF POS -2) x .100[2.54]
(EITHER DIRECTION)
2
MAX SWAY
FIG 2
FIG 3
(EITHER DIRECTION)
-LC: LOCKING CLIP
-A: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"H"±.020[0.51]
"G"±.020[0.51]
"J"±.020[0.51]
"E" .020[0.51]
.157 3.99
REF
.164 4.17
.257 6.53 REF
PPP-86
.390 9.91
REF
PPP-81
.225 5.72 REF
"D"±.010[0.13]
PPP-06
.270 6.86
REF
.270 6.86
REF
"D"±.010
.0790 2.007
"D"±.010
.270 6.86
REF
"F"
FIG 5
-M: METAL PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"E"=((NO OF POS x .100[2.54]) - .225[5.72]) / 2
FIG 10
FIG 9
-P: PICK AND PLACE PAD
(-03 POS ONLY)
-P: PICK AND PLACE PAD
(-02 POS ONLY)
FIG 4
-P: PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE:
HAND FILL USE LMP-01
MACHINE FILL USE LMP-01
"G" = ((NO OF POS x .100[2.54]) - .390[9.91])/2
"H" = ((NO OF POS x .100[2.54]) - .157[3.99])/2
"J" = ((NO OF POS x .100[2.54]) - .257[6.53])/2
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
DOUBLE ROW GULLWING ASM
DWG. NO.
TSM-1XX-XX-XXX-XX-X-XXX-X
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
BY:
BRYANT
04/24/1991 SHEET 2 OF 3
REVISION DR
.100 2.54
.230 5.84
(SEE TABLE 2)
(SEE NOTE 2)
+.000
-.005
0.00
C
HTSW-50-T-LCP
.100 2.54 REF
.230
5.84-0.13
3° (SEE NOTE 12)
(SEE TABLE 5, SHT 1)
C
.150 3.81
REF
.150±.010 3.81±0.25
3°
.050±.010 1.27±0.25 (TYP)
(SEE NOTE 6)
(SEE NOTE 12)
.450±.015 11.43±0.38
FIG 6
-TM: TRIPLE MIXED TECHNOLOGY
IN-PROCESS
T-1S6-17-XXX-2
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
-TM MOUNT STYLE
.1000 2.540
REF (TYP)
.050 1.27
REF (TYP)
.0490 1.245
REF (TYP)
.020 0.51
REF (TYP)
ROUND HOLES
.0500 1.270
REF (TYP)
PIN 1
03
OBLONG HOLES
01
.2980 7.569
REF (TYP)
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
FIG 8
PACKAGING VIEWS
(SEE TABLE 5, SHT 1)
.050±.010 1.27±0.25
FIG 7
-TV: TRIPLE VERTICAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
FOR EXISTING CUSTOMERS ONLY
+.000
-.005
0.00
.230
5.84-0.13
+.000
-.005
0.00
+.000
-.005
0.00
.230
5.84-0.13
.230
5.84-0.13
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
.150 3.81
REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.150 3.81
REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
.050±.010 1.27±0.25
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
DOUBLE ROW GULLWING ASM
IN-PROCESS 3
IN-PROCESS 2
IN-PROCESS 1
DWG. NO.
-TV MOUNT STYLE
-TV MOUNT STYLE
-TV MOUNT STYLE
TSM-1XX-XX-XXX-XX-X-XXX-X
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
BY:
BRYANT
04/24/1991 SHEET 3 OF 3
TSM-105-01-S-DV-LC-010-P 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| TSM-105-01-S-DV-LC-010-P-TR | SAMTEC | .025 SQ. TERMINAL STRIPS | 获取价格 |
|
| TSM-105-01-S-DV-LC-P | SAMTEC | Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, | 获取价格 |
|
| TSM-105-01-S-DV-LC-P-TR | SAMTEC | Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, | 获取价格 |
|
| TSM-105-01-S-DV-LC-TR | SAMTEC | .025 SQ. TERMINAL STRIPS | 获取价格 |
|
| TSM-105-01-S-DV-M | ETC | TERMINAL STRIPS | 获取价格 |
|
| TSM-105-01-S-DV-M-P | SAMTEC | Board Connector | 获取价格 |
|
| TSM-105-01-S-DV-M-P-TR | SAMTEC | Board Connector | 获取价格 |
|
| TSM-105-01-S-DV-M-TR | SAMTEC | Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, | 获取价格 |
|
| TSM-105-01-S-DV-P | ETC | TERMINAL STRIPS | 获取价格 |
|
| TSM-105-01-S-DV-P-TR | SAMTEC | SMT .025" SQ POST HEADER | 获取价格 |
|
TSM-105-01-S-DV-LC-010-P 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
