TSM-114-01-L-DV-004-M-TR [SAMTEC]

Board Connector,;


型号：	TSM-114-01-L-DV-004-M-TR
厂家：	SAMTEC
描述：	Board Connector,
文件：	总3页 (文件大小：350K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOTES:

REVISION DP

TSM-1XX-XX-XXX-XX-X-XXX-X

REPRESENTS A CRITICAL DIMENSION.

2. MAXIMUM POST HEIGHT VARIATION: .005[0.13].

3. LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW.

4. TUBE POSITIONS 03 THRU 50.

5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY.

LEADS MAY NOT BE VISIBLE FOR CUSTOMER'S VISUAL

INSPECTION ON SMALLER POSITIONED PARTS WHEN USED

WITH THE -P OR -M OPTIONS.

6. MEASURE AT BEND RADIUS.

7. MINIMUM PUSHOUT FORCE: 3 LBS.

8. FOR -TV USE T-31724-01.

9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,

THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.

SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL

ASSEMBLIES WITH THE -LC OPTION.

10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH

SSM, SSW, SSQ, BCS, ESW AND ESQ.

11. MAXIMUM ALLOWABLE CUT FLASH .010[0.25],

.015[0.38] ALLOWED TOWARDS TAILS.

12. THIS DIMENSION TO BE MEASURED RELATIVE TO DATUM -Z-.

13. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,

BASED ON OPTIONS SELECTED.

OPTION #3

No OF POSITIONS

-02 THRU -50

(NOT AVAILABLE WITH -TV & -TM MOUNT STYLES)

-P: PICK AND PLACE PAD

DO NOT

SCALE FROM

THIS PRINT

(POS -04 THRU -36, 50 USE PPP-06,

SEE FIG4, SHT 2)

(POS -02, USE PPP-81, SEE FIG 9, SHT 2)

(POS -03, USE PPP-86, SEE FIG 10, SHT 2)

(AVAILABLE ON POS -02 & -03 WITH -TR & -FR OPTION ONLY)

-M: METAL PICK AND PLACE PAD

LEAD STYLE

(SEE TABLE 1)

PLATING SPECIFICATION

-T: MATTE TIN ON ENTIRE PIN.

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,

3µ" SELECTIVE GOLD ON TAIL.

-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-TL: TIN/LEAD (90/10) ON ENTIRE PIN.

-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,

TIN/LEAD (90/10) ON TAIL.

-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,

3µ" SELECTIVE GOLD ON TAIL.

-TM: MATTE TIN ON ENTIRE PIN.

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL. (SEE NOTE 10)

* FOR EXISTING CUSTOMERS ONLY

(USE LMP-01, SEE FIG 5, SHT 2)

(NOT RECOMMENDED WITH -T OR -TM PLATING)

(LEAD STYLES -01 & -04 ONLY)

(AVAILABLE ON POS 04 THRU 36)

(AVAILABLE ON POS 02 AND 03 WITH -TR & -FR

OPTION ONLY, SEE NOTE 5)

-TR: TAPE AND REEL (SEE FIG 8, SHT 3)

(02 THRU 28 POS)

-FR: FULL REEL QTY. TAPE & REEL (SEE FIG 8, SHT 3)

(02 THRU 28 POS)(SEE NOTE 13)

OPTION #2

POLARIZED POSITION

SPECIFY OMITTED PIN

OPTION #1

(AVAILABLE FOR -DV MOUNT STYLE ONLY)

-LC: LOCKING CLIP (SEE FIG 2, SHT 2)

(USE LC-05-TM)

(-03 THRU -36 POS, USE 2 PER STRIP)

(-02 POS, USE 1 PER STRIP)

(USE RTSM-XX-DVU)

(SEE NOTE 9)

+.000[0.00]

-.015[0.38]

(NO OF POS x .100[2.54])

-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)

(FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY)

(FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN)

(LEAVE BLANK FOR NO HOLD DOWN OPTION)

USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION)

(NO OF POS -1) x .100[2.54]

RTSM-50-DVU

MOUNT STYLE

-DV: DOUBLE VERTICAL

-TV: TRIPLE VERTICAL (-02 THRU -30 ONLY)

(USE HTSW-50-T-LCP, SEE NOTE 8)

"C" MAX

(SEE TABLE 1)

.200 5.08

REF

-TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY)

(USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY)

01 03

MAX SWAY

(EITHER DIRECTION)

MAX SWAY

* = FOR EXISTING CUSTOMERS ONLY

(EITHER DIRECTION)

.100 2.54

.025 0.64 SQ

REF (TYP)

MAX SWAY

(EITHER DIRECTION)

"B"

(SEE TABLE 1

& NOTE 2)

(SEE TABLE 1

& NOTE 2)

.100 2.54 REF

3° (SEE NOTE 12)

-Z-

SEE TABLE 5

.050±.010 1.27±0.25 (TYP)

(SEE NOTE 6)

FIG 1

IN-PROCESS

-DV MOUNT STYLE

5° (SEE NOTE 12)

TSM-1XX-XX-XXX-DV SHOWN

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

TOLERANCES ARE:

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXX: .005 [.13]

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

.XXXX: .0020 [.051]

e-Mail info@SAMTEC.com

SHEET SCALE: 2:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

INSULATOR: LCP, UL94VO, COLOR: BLACK

TERMINAL: PHOS BRONZE

DOUBLE ROW GULLWING ASM

DWG. NO.

TSM-1XX-XX-XXX-XX-X-XXX-X

SHEET 1 OF

BY: BRYANT

04/24/1991

F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW

REVISION DP

.045 1.14

REF

(SEE TABLE 3)

.110 2.79

"A"

LC-05-TM

.063 1.60 REF

.048 1.21 REF

(NO OF POS -2) x .100[2.54]

MAX SWAY

(NO OF POS -2) x .100[2.54]

(EITHER DIRECTION)

MAX SWAY

FIG 2

FIG 3

-A: ALIGNMENT PIN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(EITHER DIRECTION)

-LC: LOCKING CLIP

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

"H"±.020[0.51]

"G"±.020[0.51]

"J"±.020[0.51]

"E" .020[0.51]

.157 3.99

REF

.164 4.17

.257 6.53 REF

.390 9.91

REF

PPP-81

PPP-86

.225 5.72 REF

"D"±.010[0.13]

PPP-06

.270 6.86

REF

.270 6.86

REF

"D"±.010

.0790 2.007

"D"±.010

.270 6.86

REF

"F"

FIG 5

-M: METAL PICK AND PLACE PAD

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

"E"=((NO OF POS x .100[2.54]) - .225[5.72]) / 2

FIG 10

FIG 9

-P: PICK AND PLACE PAD

(-03 POS ONLY)

-P: PICK AND PLACE PAD

(-02 POS ONLY)

FIG 4

-P: PICK AND PLACE PAD

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

NOTE:

HAND FILL USE LMP-01

MACHINE FILL USE LMP-01

"G" = ((NO OF POS x .100[2.54]) - .390[9.91])/2

"H" = ((NO OF POS x .100[2.54]) - .157[3.99])/2

"J" = ((NO OF POS x .100[2.54]) - .257[6.53])/2

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

code 55322

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

DOUBLE ROW GULLWING ASM

DWG. NO.

TSM-1XX-XX-XXX-XX-X-XXX-X

F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW

SHEET 2 OF

BY: BRYANT

04/24/1991

REVISION DP

.100 2.54

.230 5.84

(SEE TABLE 2)

(SEE NOTE 2)

+.000

- .005

0.00

HTSW-50-T-LCP

.100 2.54 REF

.230

5.84 _{- 0.13}

3° (SEE NOTE 12)

(SEE TABLE 5, SHT 1)

.150 3.81

REF

.150±.010 3.81±0.25

3°

.050±.010 1.27±0.25 (TYP)

(SEE NOTE 6)

(SEE NOTE 12)

.450±.015 11.43±0.38

FIG 6

-TM: TRIPLE MIXED TECHNOLOGY

IN-PROCESS

-TM MOUNT STYLE

T-1S6-17-XXX-2

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.1000 2.540

REF (TYP)

.050 1.27

REF (TYP)

.0490 1.245

REF (TYP)

.020 0.51

REF (TYP)

ROUND HOLES

.0500 1.270

REF (TYP)

PIN 1

OBLONG HOLES

.2980 7.569

REF (TYP)

USER DIRECTION OF UNREELING

POCKET NOT DETAILED

FIG 8

PACKAGING VIEWS

(SEE TABLE 5, SHT 1)

.050±.010 1.27±0.25

FIG 7

-TV: TRIPLE VERTICAL

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)

FOR EXISTING CUSTOMERS ONLY

+.000

- .005

0.00

.230

5.84 _{- 0.13}

+.000

- .005

0.00

+.000

- .005

0.00

.230

5.84 _{- 0.13}

.230

5.84 _{- 0.13}

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

.150 3.81

REF

.150 3.81

REF

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

.050±.010 1.27±0.25

code 55322

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

DOUBLE ROW GULLWING ASM

IN-PROCESS 3

-TV MOUNT STYLE

IN-PROCESS 2

-TV MOUNT STYLE

IN-PROCESS 1

-TV MOUNT STYLE

DWG. NO.

TSM-1XX-XX-XXX-XX-X-XXX-X

F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW

SHEET 3 OF

BY: BRYANT

04/24/1991

相关型号：

TSM-114-01-L-DV-004-P-TR

.025 SQ. TERMINAL STRIPS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

SAMTEC

SAMTEC

TSM-114-01-L-DV-LC

.025 SQ. TERMINAL STRIPS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

SAMTEC