TSM-133-03-S-SV-A-P [SAMTEC]

Board Connector, 33 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal,;


型号：	TSM-133-03-S-SV-A-P
厂家：	SAMTEC
描述：	Board Connector, 33 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal,
文件：	总2页 (文件大小：280K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TSM-1XX-XX-XXX-SV-XX-XXX-XX

REVISION BO

OPTION #3

No OF POSITIONS

-02 THRU -50

-P: PICK & PLACE PAD (SEE FIG. 3)

[USE PPP-07](4 POS MINIMUM

OR -02 & -03 POS WITH -TR)

(SEE NOTE 7)

-TR: TAPE & REEL (SEE NOTE 7)

(-02 THRU -22 POS)

DO NOT

SCALE FROM

THIS PRINT

LEAD STYLE

SEE TABLE 1

PLATING SPECIFICATION

-T: MATT TIN CONTACT AND TAIL

-S: SELECTIVE, 30 Au / 50 Ni MIN ON

CONTACT, MATTE TIN TAIL

.000[.00]

.015[.13]

OPTION #2

POLARIZED POSITION: SPECIFY PIN OMITTED

(No OF POS x .100[2.54])

-G: GOLD, 10 Au / 50 Ni MIN ON CONTACT,

3 Au / 50 Ni MIN ON TAIL

-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON

CONTACT, MATTE TIN ON TAIL

-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON

CONTACT, MATTE TIN TAIL

(No OF POS -1) x .100[2.54]

OPTION #1

-LC: LOCKING CLIP (SEE FIG. 1)(SEE NOTE 8)

[USE LC-08-TM-02](-02 THRU -36 POS: 2 PER STRIP,

-02 POS: 1 PER STRIP)

-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON

CONTACT, 3 Au / 50 Ni MIN ON TAIL

-TL: TIN / LEAD (90/10+/-5%) CONTACT AND TAIL

[LEAD STYLE -01 & -02 ONLY]

-A: ALIGNMENT PIN (SEE FIG. 2)

.100 2.54 REF

ROW SPECIFICATION

-SV: SINGLE VERTICAL (USE TSM-XX-SV-XX)

-STL: SELECTIVE, 30 Au / 50 Ni MIN ON

CONTACT, TIN/LEAD (90/10+/-5%) TAIL

[LEAD STYLE -01 & -02 ONLY]

-TM: MATTE TIN CONTACT AND TAIL

-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,

MATTE TIN TAIL

IN-PROCESS

-A OPTION ONLY

MAX SWAY

(TYP)

TSM-XX-SV

-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT,

MATTE TIN TAIL

-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT,

MATTE TIN TAIL

"B" ^+.002[.05]

-.000[.00]

-SS: STRIPE SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,

MATTE TIN TAIL (SEE NOTE 9)

T-1S6-XX-X-2

(SEE TABLE 1

& NOTE 5)

MAX SWAY

MAX TOE

(TYP)

"E" REF

(EITHER DIRECTION)

.025 0.64 SQ REF

(TYP)

"F"

(CONTACT AREA)

"B" .008[.20]

(SEE TABLE 1

& NOTE 5)

+5°

-0°

90° (TYP)

IN-PROCESS

.050±.010 1.27±0.25

(TYP)

.100 2.54 REF

.006

.000[.00]

.005[.13]

.099 2.51

"B"

(SEE TABLE 1

& NOTE 5)

LC-08-TM-02

.010 0.25 REF

(No OF POS -2) x .100[2.54]

NOTES:

"D" MAX

"E" REF

REPRESENTS A CRITICAL DIMENSION.

2. COPLANARITY TO BE WITHIN .006[.15].

3. BURR ALLOWANCE: .0015[.038] MAX.

.056 1.42 REF

MAX SWAY

(EITHER DIRECTION)

4. MAXIMUM CUT FLASH: .015[.38] MAXIMUM ON TOP & SIDES OF BODY

AND .030[.76] MAXIMUM ON SURFACE MOUNT SIDE OF BODY.

5. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[.13] MAXIMUM.

6. MAXIMUM ALLOWABLE BOW: .002[.05] INCH/INCH AFTER ASSEMBLY.

7. LEADS MAY NOT BE VISIBLE FOR CUSTOMER VISUAL INSPECTION WITH -P

OPTION ON SMALLER POSITIONS PARTS.

FIG 1

TSM-112-02-XXX-SV-LC SHOWN

8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.

9. -01 LEAD STYLE ONLY, MATES WITH SSW, SSQ, BCS, SSM, ESW, ESQ.

PROPRIETARY NOTE

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005 [.13]

.XXXX: .0020 [.051]

SHEET SCALE: 2.5:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

INSULATOR:

SINGLE ROW .100 SMT ASSEMBLY

LCP, UL 94 VO

COLOR: BLACK

DWG. NO.

TSM-1XX-XX-XXX-SV-XX-XXX-XX

TERMINAL: PHOS BRONZE

BY:

DEAN P

8/21/2002

SHEET 1 OF 2

F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW

REVISION BO

FIG 4

FIG 3

-P: PICK & PLACE PAD OPTION

TUBE PACKAGING

4 POSITION MINIMUM

[PLACE PAD ON CENTERLINE AS SHOWN]

.400 10.16

REF

"A" .020

NOTES:

1. LOAD PARTS POSITION 1 FIRST IN SAME DIRECTION AS ARROW.

2. NOTE DELETED

3. PACKAGE POSITIONS -04 THRU -36.

4. POLARIZED 4 POSITION PARTS WITHOUT PADS ARE TO BE LAYER PACKAGED

OR PACKAGED IN TAPE AND REEL.

PPP-07

.270 6.86

REF

FIG 5

"C" .010[.25]

-TR: TAPE & REEL PACKAGNG OPTION

POS 1 (TOWARD

ROUND HOLE)

"A" = (No OF POSITIONS x .100[2.54]) - .400[10.16]

FIG 2

-A: ALIGNMENT PIN OPTION

TSM-112-02-X-SV-A SHOWN

USER DIRECTION OF UN-REELING

POCKET NOT DETAILED

[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1]

SEE TABLE 2

F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW

.100 2.54 REF

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.062 1.57

REF

(No OF POS -2) x .100[2.54] REF

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

e-Mail info@SAMTEC.com

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

SINGLE ROW .100 SMT ASSEMBLY

DWG.

^NO.TSM-1XX-XX-XXX-SV-XX-XXX-XX

BY:

DEAN P

8/21/2002

SHEET 2 OF 2

相关型号：