TSM-134-02-L-DV-A [SAMTEC]
Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT;
| 型号： | TSM-134-02-L-DV-A |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT PC 连接器 |
| 文件： | 总3页 (文件大小：367K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION DO
C
1.
REPRESENTS A CRITICAL DIMENSION.
TSM-1XX-XX-XXX-XX-X-XXX-X
2. MAXIMUM POST HEIGHT VARIATION: .005[0.13].
3. LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW.
4. TUBE POSITIONS 03 THRU 50.
No OF POSITIONS
-02 THRU -50
DO NOT
SCALE FROM
THIS PRINT
5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY.
LEADS MAY NOT BE VISIBLE FOR CUSTOMER'S VISUAL
INSPECTION ON SMALLER POSITIONED PARTS WHEN USED
WITH THE -P OR -M OPTIONS.
OPTION #3
(NOT AVAILABLE WITH -TV & -TM MOUNT STYLES)
-P: PICK AND PLACE PAD
(POS -04 THRU -36, 50 USE PPP-06,
SEE FIG4, SHT 2)
LEAD STYLE
(SEE TABLE 1)
6. MEASURE AT BEND RADIUS.
7. MINIMUM PUSHOUT FORCE: 3 LBS.
(POS -02, USE PPP-81, SEE FIG 9, SHT 2)
(POS -03, USE PPP-86, SEE FIG 10, SHT 2)
(AVAILABLE ON POS -02 & -03 WITH -TR OPTION ONLY)
-M: METAL PICK AND PLACE PAD
* FOR EXISTING CUSTOMERS ONLY
(USE LMP-01, SEE FIG 5, SHT 2)
8. FOR -TV USE T-31724-01.
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
PLATING SPECIFICATION
-T: MATTE TIN ON ENTIRE PIN.
*
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH
SSM, SSW, SSQ, BCS, ESW AND ESQ.
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
(NOT RECOMMENDED WITH -T OR -TM PLATING)
(LEAD STYLES -01 & -04 ONLY)
11. MAXIMUM ALLOWABLE CUT FLASH .010[0.25],
.015[0.38] ALLOWED TOWARDS TAILS.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(AVAILABLE ON POS 04 THRU 36)
(AVAILABLE ON POS 02 AND 03 WITH -TR
OPTION ONLY, SEE NOTE 5)
12. THIS DIMENSION TO BE MEASURED RELATIVE TO DATUM -Z-.
-TL: TIN/LEAD (90/10) ON ENTIRE PIN.
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10) ON TAIL.
-TR: TAPE AND REEL (SEE FIG 8, SHT 3)
(02 THRU 28 POS)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
OPTION #2
POLARIZED POSITION
SPECIFY OMITTED PIN
-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
-TM: MATTE TIN ON ENTIRE PIN.
OPTION #1
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(AVAILABLE FOR -DV MOUNT STYLE ONLY)
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
(USE LC-05-TM)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(-03 THRU -36 POS, USE 2 PER STRIP)
(-02 POS, USE 1 PER STRIP)
(USE RTSM-XX-DVU)
(SEE NOTE 9)
C
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
+.000[0.00]
-.015[0.38]
(NO OF POS x .100[2.54])
-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL. (SEE NOTE 10)
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY)
(FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN)
(LEAVE BLANK FOR NO HOLD DOWN OPTION)
USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION)
(NO OF POS -1) x .100[2.54]
C
RTSM-50-DVU
02
C
"C" MAX
(SEE TABLE 1)
.200 5.08
MOUNT STYLE
-DV: DOUBLE VERTICAL
REF
-TV: TRIPLE VERTICAL (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, SEE NOTE 8)
*
01 03
-TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY)
(USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY)
2
MAX SWAY
5
MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
* = FOR EXISTING CUSTOMERS ONLY
.100 2.54
.025 0.64 SQ
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
C
"B"
"B"
(SEE TABLE 1
& NOTE 2)
(SEE TABLE 1
& NOTE 2)
.100 2.54 REF
3° (SEE NOTE 12)
-Z-
SEE TABLE 5
.050±.010 1.27±0.25 (TYP)
C
FIG 1
IN-PROCESS
5° (SEE NOTE 12)
(SEE NOTE 6)
TSM-1XX-XX-XXX-DV SHOWN
-DV MOUNT STYLE
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL94VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
DOUBLE ROW GULLWING ASM
DWG. NO.
TSM-1XX-XX-XXX-XX-X-XXX-X
SHEET 1 OF
3
BY: BRYANT
04/24/1991
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
REVISION DO
.045 1.14
REF
(SEE TABLE 3)
.110 2.79
"A"
LC-05-TM
.063 1.60 REF
.048 1.21 REF
(NO OF POS -2) x .100[2.54]
2
MAX SWAY
(NO OF POS -2) x .100[2.54]
(EITHER DIRECTION)
2
MAX SWAY
FIG 2
FIG 3
-A: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(EITHER DIRECTION)
-LC: LOCKING CLIP
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"H"±.020[0.51]
"G"±.020[0.51]
"J"±.020[0.51]
"E" .020[0.51]
.157 3.99
REF
.164 4.17
.257 6.53 REF
PPP-86
.390 9.91
REF
PPP-81
.225 5.72 REF
"D"±.010[0.13]
PPP-06
.270 6.86
REF
.270 6.86
REF
"D"±.010
.0790 2.007
"D"±.010
.270 6.86
REF
"F"
FIG 5
-M: METAL PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"E"=((NO OF POS x .100[2.54]) - .225[5.72]) / 2
FIG 10
FIG 9
-P: PICK AND PLACE PAD
(-03 POS ONLY)
-P: PICK AND PLACE PAD
(-02 POS ONLY)
FIG 4
-P: PICK AND PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE:
HAND FILL USE LMP-01
MACHINE FILL USE LMP-01
"G" = ((NO OF POS x .100[2.54]) - .390[9.91])/2
"H" = ((NO OF POS x .100[2.54]) - .157[3.99])/2
"J" = ((NO OF POS x .100[2.54]) - .257[6.53])/2
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
DOUBLE ROW GULLWING ASM
DWG. NO.
TSM-1XX-XX-XXX-XX-X-XXX-X
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
BY: BRYANT
04/24/1991
SHEET 2 OF
3
REVISION DO
.100 2.54
.230 5.84
(SEE TABLE 2)
(SEE NOTE 2)
+.000
-.005
0.00
C
HTSW-50-T-LCP
.100 2.54 REF
.230
5.84-0.13
3° (SEE NOTE 12)
(SEE TABLE 5, SHT 1)
C
.150 3.81
REF
.150±.010 3.81±0.25
3°
.050±.010 1.27±0.25 (TYP)
(SEE NOTE 6)
(SEE NOTE 12)
.450±.015 11.43±0.38
FIG 6
-TM: TRIPLE MIXED TECHNOLOGY
IN-PROCESS
T-1S6-17-XXX-2
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
-TM MOUNT STYLE
.1000 2.540
REF (TYP)
.050 1.27
REF (TYP)
.0490 1.245
REF (TYP)
.020 0.51
REF (TYP)
ROUND HOLES
.0500 1.270
03
REF (TYP)
PIN 1
OBLONG HOLES
01
.2980 7.569
REF (TYP)
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
FIG 8
PACKAGING VIEWS
(SEE TABLE 5, SHT 1)
.050±.010 1.27±0.25
FIG 7
-TV: TRIPLE VERTICAL
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
FOR EXISTING CUSTOMERS ONLY
+.000
-.005
0.00
.230
5.84-0.13
+.000
-.005
0.00
+.000
-.005
0.00
.230
5.84-0.13
.230
5.84-0.13
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
.150 3.81
REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.150 3.81
REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
.050±.010 1.27±0.25
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
DOUBLE ROW GULLWING ASM
IN-PROCESS 3
-TV MOUNT STYLE
IN-PROCESS 2
IN-PROCESS 1
DWG. NO.
-TV MOUNT STYLE
-TV MOUNT STYLE
TSM-1XX-XX-XXX-XX-X-XXX-X
SHEET 3 OF
3
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW
BY: BRYANT
04/24/1991
相关型号：
TSM-134-02-L-DV-A-P
.025 SQ. TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
SAMTEC
TSM-134-02-L-DV-M
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-DV-P
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-DV-XX
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-SH
Board Connector, 34 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
SAMTEC
TSM-134-02-L-SH-A
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-SH-K
Board Connector, 34 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
SAMTEC
TSM-134-02-L-SH-M
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-SH-P
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
TSM-134-02-L-SH-XX
TERMINAL STRIPSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
©2020 ICPDF网 联系我们和版权申明