TSW-103-14-T-S
更新时间：2024-09-18 16:15:11
品牌：SAMTEC
描述：Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
概述
规格参数
数据手册
替代型号TSW-103-14-T-S 概述
Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle, ROHS COMPLIANT 板对板连接器 集管和边缘连接器
TSW-103-14-T-S 规格参数
| 是否无铅： | 不含铅 | 是否Rohs认证： | 符合 |
| 生命周期： | Active | 包装说明： | ROHS COMPLIANT |
| Reach Compliance Code： | compliant | Factory Lead Time： | 8 weeks |
| 其他特性： | E.L.P. | 主体宽度： | 0.1 inch |
| 主体深度： | 0.1 inch | 主体/外壳类型： | RECEPTACLE |
| 连接器类型： | BOARD CONNECTOR | 联系完成配合： | MATTE TIN OVER NICKEL (50) |
| 联系完成终止： | Matte Tin (Sn) - with Nickel (Ni) barrier | 触点性别： | MALE |
| 触点材料： | PHOSPHOR BRONZE | 触点模式： | RECTANGULAR |
| 触点样式： | SQ PIN-SKT | DIN 符合性： | NO |
| 滤波功能： | NO | IEC 符合性： | NO |
| 绝缘体颜色： | BLACK | 绝缘体材料： | GLASS FILLED POLYESTER |
| JESD-609代码： | e3 | MIL 符合性： | NO |
| 插接触点节距： | 0.1 inch | 插接信息： | MULTIPLE MATING PARTS AVAILABLE |
| 混合触点： | NO | 安装方式： | STRAIGHT |
| 安装类型： | BOARD | 连接器数： | ONE |
| PCB行数： | 1 | 装载的行数： | 1 |
| 选件： | GENERAL PURPOSE | PCB接触模式： | RECTANGULAR |
| 参考标准： | UL | 可靠性： | COMMERCIAL |
| 子类别： | Headers and Edge Type Connectors | 端子长度： | 0.11 inch |
| 端子节距： | 2.54 mm | 端接类型： | SOLDER |
| 触点总数： | 3 | UL 易燃性代码： | 94V-0 |
| Base Number Matches： | 1 |
TSW-103-14-T-S 数据手册
通过下载TSW-103-14-T-S数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载REVISION DP
TSW-XXX-XX-XXX-X-XX-XXX
OPTION #2
TERMINAL SPACE SPEC.
-POLARIZING SPECIFICATION
XXX INDICATES POS. TO BE OMITTED (SEE FIG 3)
DO NOT
SCALE FROM
THIS PRINT
(SEE ASSEMBLY INSTRUCTIONS)
-1=.100[2.54] FILL EVERY POSITION
-2= .200[5.08] FILL EVERY OTHER POS.
STARTING W/ 1ST & ENDING
W/ LAST POS. IN BODY)
OPTION #1
-BLANK= STRAIGHT
-RA= RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)
-RE= EXTENDED RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)(SINGLE ROW ONLY)
-NA= RA OPTION WITH STRAIGHT OPTION BODY
-NE= RE OPTION WITH STRAIGHT OPTION BODY
-LC= LOCKING CLIP (USE LTC-01 FOR -S ROW AND
LTC-02 FOR -D ROW)(STYLES 08 THRU 13 & 22 ONLY) (SEE FIG 2)
(N/A IN -RA OR -RE OPTION AND/OR LESS THAN 4 POSITIONS)
(N/A IN -T OR -Q)
BODY LENGTH SPEC.
EXPRESSED IN # OF POS
-1: -01 THRU -50 (-S, -D, -T)
"A" = NO. OF POS. x .100[2.54]
-2: -02 THRU -25 (-S, -D, -T)
"A" = NO OF POS. x .200[5.08] - .100[2.54]
-LA= -RA OPTION WITH -LL OPTION (SEE FIG 5)
-LL= LOCKING LEAD (SEE FIG 4)
TERMINAL SPECIFICATION
SEE TABLE 1
(N/A WITH -RE OR -NE OPTION)
(N/A IN SINGLE ROW, 1 OR 2 POSITIONS)
ROW SPECIFICATION (SEE TABLE 2)
PLATING SPECIFICATION
-S: SINGLE
-D: DOUBLE
-T: TRIPLE
-G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
(-07, -08, -09, -13, -14, -15, -16, -20, -21 ONLY)
-Q: TRIPLE ROW, FILL OUTER ROWS ONLY
-TL: TIN/LEAD (90/10 +/-5%) CONTACT AND TAIL
(AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09)
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL
(AVAILABLE ONLY ON LEAD STYLES -07, -08, -10, -15, -16, -17, -21, -23 & -24
THROUGH HOLE ONLY)
-TM: MATTE TIN CONTACT AND TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE NOTE 13)
NOTES:
C
1.
REPRESENTS CRITICAL DIMENSION.
2. MINIMUM TERMINAL PUSHOUT: 3 LBS.
3. MAXIMUM HEIGHT VARIATION: .005[0.13](-RA TAIL N/A).
4. ASSEMBLE GOLD PLATE END AS SHOWN.
5. STYLE -26: ROUND END TO APPEAR ON BOTTOM.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
.005[0.13]
6. 'C'±
FOR STYLE -08, OPTION -LA & -RA ONLY.
.008[0.20]
7. TOW & SWAY SPEC. OF 2° APPLIES TO ALL
POSITIONS, POST & TAIL, IN ALL DIRECTIONS.
TOLERANCES ARE:
DECIMALS
ANGLES
2
8. ALL DIMENSIONS TO BE ABOUT CL WITHIN ±.005[0.13].
9. MEASURE FROM THE BEND RADIUS OF THE TERMINALS .
10. TSW-50-D BODY CAN BE USED IF RTSW-50-D IS UNAVAILABLE
11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING
IN THE POST AREA. (SEE TABLE 7)
.XX: .01[0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005[0.13]
.XXXX: .0020[0.051]
C
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
BODIES: DUPONT PBT, UL 94 VO, COLOR: BLACK
TERMINALS: PHOS BRONZE
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
12. MAXIMUM CUT FLASH: .020[0.50]
DWG. NO.
13. -SS OPTION ONLY AVAILABLE IN STRAIGHT LEAD STYLES -07, -08 &
-09, -RA STYLE -08 ONLY. CAN ONLY MATE WITH SSW, SSQ, SSM,
ESW, ESQ AND BCS.
TSW-XXX-XX-XXX-X-XX-XXX
BY:
KOLB
08/24/1988 SHEET 1 OF 6
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
REVISION DP
C
SEE TABLE 8
(SEE CALLOUT)
-1XX=.100[2.54]
-2XX=.200[5.08]
C
"C"±.008[0.20]
.100 2.54
.200 5.08
.200 5.08
(SEE TABLE 1, SHT 6)
(SEE NOTE 3 AND 6)
2
MAX SWAY
2
MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
.100 2.54
"L"
.100 2.54
REF
(SEE TABLE 4, SHT 5)
.100 2.54
REF
.300 7.62
REF
.300 7.62
REF
.200 5.08
REF
SEE NOTE 5
2
MAX SWAY
2
MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
FIG 1
-S
-D
-T
-Q
(TSW-1XX-XX-XX-S SHOWN)
"G" REF
.596 15.15
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
"F"
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
DWG. NO.
FIG 2
TSW-XXX-XX-XXX-X-XX-XXX
(TSW-1XX-XX-XX-S-LC SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
BY:
KOLB
08/24/1988 SHEET 2 OF 6
FIG 3
REVISION DP
-1: .100[2.54] TERMINAL SPACING
(SAME AS FIG 1, DIFFERENT AS SHOWN)
01
01
01
01
50
01
02 01
03 01
03
C
C
L
L
01
01
SINGLES
02
DOUBLES
TRIPLES
SINGLES
DOUBLES
TRIPLES
01
99
100
148
148
150
150
-Q:
(FILL OUTER ROWS ONLY)
SINGLES
DOUBLES
TRIPLES
STRAIGHT VERSION
STRAIGHT VERSION
ODD POSITIONS
EVEN POSITIONS
01
01
25
01
03
02 01
04
03 01
04
03
01
01
C
C
L
L
02
75
01
49
50 73
75 73
01
01
-Q:
(FILL OUTER ROWS ONLY)
DOUBLES
TRIPLES
SINGLES
SINGLES
DOUBLES
TRIPLES
SINGLES
DOUBLES
TRIPLES
RIGHT ANGLE VERSION
-2: .200[5.08] TERMINAL SPACING
RIGHT ANGLE VERSION
EVEN POSITIONS
ODD POSITIONS
LOCKING LEAD
= CRIMP LOCATION
TWO CENTER MOST PINS TO BE CRIMPED.
ODD POSITIONS, CRIMP CENTER POSITION AND POSITION CLOSEST TO PIN ONE.
IF CRIMP POSITION IS POLARIZED, MOVE ONE POSITION TOWARDS PIN ONE.
FIG 4
LOCKING LEAD
(NOTE: END VIEWS SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
LTC-01
LTC-02
SEE CRIMP DETAIL
.017 0.43
MIN
C
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.04 1.0
.0080 0.203
(TYP)
SINGLE
-LC-LL
DOUBLE
-LC-LL
SINGLE STRAIGHT DOUBLE STRAIGHT
-LL -LL
TRIPLE STRAIGHT
-LL
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
CRIMP DETAIL
DWG. NO.
SCALE: 4:1
TSW-XXX-XX-XXX-X-XX-XXX
(TYP ALL CRIMPS)
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
BY:
KOLB
08/24/1988 SHEET 3 OF 6
FIG 5
REVISION DP
(RIGHT ANGLE)
PIN #3
PIN #2
PIN #1
(-LA OPTION IS SHOWN ON ALL RIGHT ANGLES
FOR DIMENSIONAL AND LOCATION PURPOSES.)
(SEE CRIMP DETAIL VIEW, SHT 3)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
PIN #2
PIN #1
PIN #1
.320 8.13
REF
.219 5.56
REF
.119 3.02
.04 1.0
.04 1.0
REF
.04 1.0
90°
C
90°
C
C 90°
.06 1.5
.06 1.5
C
.100 2.54
.100 2.54
.200 5.08
(SEE NOTE 9)
C
C
(SEE NOTE 9)
"E" REF
(SEE TABLE 5)
"D"
(SEE TABLE 3)
"E" REF
(SEE TABLE 5)
"E" REF
(SEE TABLE 5)
-S
-D
-T
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
DWG. NO.
TSW-XXX-XX-XXX-X-XX-XXX
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
BY:
KOLB
08/24/1988 SHEET 4 OF 6
REVISION DP
POST AREA
BANDOLIER (REF)
TAIL AREA
IN PROCESS 1
(SAME AS FIG 1, DIFFERENT AS SHOWN)
-T PLATING ONLY
(SEE NOTE 11)
(SEE TABLE 7)
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
DWG. NO.
TSW-XXX-XX-XXX-X-XX-XXX
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
BY:
KOLB
08/24/1988 SHEET 5 OF 6
REVISION DP
.025 0.64 SQ
REF (TYP)
.018 0.46
REF (TYP)
FIG 6
(-26 LEAD STYLE)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(1) .230[5.84] POST FOR -RA OR -RE OPTION
(5) AVAILABLE IN -LL OPTION
(2) OMIT WITH -Q ROW SPECIFICATION
(3) NOT AVAILABLE IN -RA OR -RE OPTION
(4) NOT AVAILABLE IN -RE OPTION
(6) AVAILABLE IN -LA OPTION
.005[0.13]
(7) ON STYLE -08 -LA, RA: "C" = .230[5.84]±
(8) 1.220[30.99] POST FOR STRAIGHT PIN VE.R0S08IO[0N.20]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
* SQUARE END OF PIN (T-1RS7-01-XXX-2 SHOULD BE LOCATED AT "C" DIMENSION DURING FILL PROCESS.
(SEE FIG. 6)
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
NO.
DTWGS. W-XXX-XX-XXX-X-XX-XXX
F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW
BY:
KOLB
08/24/1988 SHEET 6 OF 6
TSW-103-14-T-S CAD模型
引脚图
封装焊盘图
TSW-103-14-T-S 替代型号
| 型号 | 制造商 | 描述 | 替代类型 | 文档 |
| TSW-103-14-G-S | SAMTEC | Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, | 功能相似 |
|
TSW-103-14-T-S 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| TSW-103-15-F-D | SAMTEC | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT | 获取价格 |
|
| TSW-103-15-F-D-LL | SAMTEC | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT | 获取价格 |
|
| TSW-103-15-F-S | SAMTEC | .025" SQ. TERMINAL STRIPS | 获取价格 |
|
| TSW-103-15-G-D | SAMTEC | .025" SQ. TERMINAL STRIPS | 获取价格 |
|
| TSW-103-15-G-S | SAMTEC | .025" SQ. TERMINAL STRIPS | 获取价格 |
|
| TSW-103-15-G-S-LL | SAMTEC | Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT | 获取价格 |
|
| TSW-103-15-G-T | SAMTEC | Board Connector, 9 Contact(s), 3 Row(s), Male, Straight, Solder Terminal, | 获取价格 |
|
| TSW-103-15-L-D | SAMTEC | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT | 获取价格 |
|
| TSW-103-15-L-D-003 | SAMTEC | Board Connector, 5 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, | 获取价格 |
|
| TSW-103-15-L-D-LL | SAMTEC | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, ROHS COMPLIANT | 获取价格 |
|
TSW-103-14-T-S 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
