概述
数据手册SG-C17LXZ27S 概述
Automotive Alternator Diode
SG-C17LXZ27S 数据手册
通过下载SG-C17LXZ27S数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载VZ = 27 V (typ.)
Automotive Alternator Diode
SG-C17xxZ27 Series
Data Sheet
Description
Package
Pressfit
The SG-C17xxZ27 series are the rectification diodes
designed for alternator circuit of automotives, and have
zener characteristics with high surge capability.
The package is the press-fit type that has high heat
release capability and high reliability for high
temperature and humidity environment. In addition, the
bridge circuit can be configured easily in small area by
using suffix “S” type and suffix “R” type of reverse
polarity type.
(2)
(1)
Features
(1)
(2)
(2)
● TJ = 235 °C Capability Suitable for High Reliability
and Automotive Requirement
● Thermal Fatigue Capability: 5,000 cyc.
● High Surge Capability
Suffix “S”
Suffix “R”
(1)
● RoHS Compliant
Not to scale
Suffix “R”
Applications
Pin No.
(1)
Suffix “S”
Cathode
Anode
● Alternator Circuit for the 12 V Battery Automotive
Anode
(2)
Cathode
Typical Application
Selection Guide
Voltage
SG-C17xxZ27S
Regulator
Rotor
VZ
TJ
(Max.)
Part Number
IF(AV)
35 A
50 A
60 A
80 A
Min.
Max.
30 V
SG-C17LXZ27S
SG-C17LXZ27R
SG-C17VLZ27S
SG-C17VLZ27R
SG-C17VVZ27S
SG-C17VVZ27R
SG-C17WVZ27S
SG-C17WVZ27R
Battery
Stator
235 °C 24 V
SG-C17xxZ27R
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
1
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Contents
Description ------------------------------------------------------------------------------------------------------1
Contents ---------------------------------------------------------------------------------------------------------2
Absolute Maximum Ratings ---------------------------------------------------------------------------------3
Electrical Characteristics ------------------------------------------------------------------------------------4
SG-C17LXZ27S, SG-C17LXZ27R Rating and Characteristic Curves -----------------------------5
SG-C17VLZ27S, SG-C17VLZ27R Rating and Characteristic Curves -----------------------------6
SG-C17VVZ27S, SG-C17VVZ27R Rating and Characteristic Curves -----------------------------8
SG-C17VWZ27S, SG-C17VWZ27R Rating and Characteristic Curves ---------------------------9
Physical Dimensions----------------------------------------------------------------------------------------- 11
Marking Diagram-------------------------------------------------------------------------------------------- 13
Important Notes---------------------------------------------------------------------------------------------- 14
SG-C17xxZ27-DSE Rev.1.2
SANKEN ELCTRIC CO., LTD.
2
Oct. 20, 2017
http://www.sanken-ele.co.jp/en
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Absolute Maximum Ratings
Unless otherwise specified, TA = 25 °C
Parameter
Symbol
Conditions
Rating
20
Unit
V
Remarks
Peak Reverse Voltage
VRM
35
SG-C17LXZ27S/R
SG-C17VLZ27S/R
SG-C17VVZ27S/R
SG-C17WVZ27S/R
SG-C17LXZ27S/R
50
Average Forward Current
Surge Forward Current
Surge Reverse Voltage
IF(AV)
A
A
V
60
80
350
Half cycle sine-wave,
positive side, 10ms,
one shot.
SG-C17VLZ27S/R
SG-C17VVZ27S/R
IFSM
500
600
50
SG-C17WVZ27S/R
SG-C17LXZ27S/R
SG-C17VLZ27S/R
SG-C17VVZ27S/R
SG-C17WVZ27S/R
65
One shot,
See Figure 2.
VRSM
75
95
Junction Temperature
Case Temperature
TJ
TC
−40 to 235
−40 to 215
−40 to 215
°C
°C
°C
See Figure 1.
Storage Temperature
TSTG
Case temperature, TC
Heat sink
Heat sink
Figure 1. Lead Temperature Measurement Conditions
0.8 Ω
VRSM
110 mF
2 Ω
Device
Figure 2. Surge Reverse Voltage Measurement Circuit (JASO A-1)
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
3
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Electrical Characteristics
Unless otherwise specified, TA = 25 °C
Parameter
Symbol
Conditions
Min.
—
Typ. Max.
Unit
V
Remarks
—
—
—
—
—
27
1.25
1.20
1.15
1.10
1
SG-C17LXZ27S/R
SG-C17VLZ27S/R
SG-C17VVZ27S/R
SG-C17WVZ27S/R
—
IF = 100 A,
t = 5 ms
Forward Voltage Drop
VF
—
—
Reverse Leakage Current
Breakdown Voltage
IR
VR = VRM
—
µA
V
VZ
IZ = 10 mA
24
30
Breakdown Voltage
Temperature Coefficient
rZ
IZ = 10 mA
—
22
—
mV/°C
—
—
—
—
0.6
0.5
SG-C17LXZ27S/R
SG-C17VLZ27S/R
(1)
Thermal Resistance
Rth(j-C)
°C/W
SG-C17VVZ27S/R
SG-C17WVZ27S/R
—
—
0.4
(1)
R
th(j-c)
is thermal resistance between junction and case. Case temperature is measured as shown in Figure 1.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
4
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
SG-C17LXZ27S, SG-C17LXZ27R Rating and Characteristic Curves
100
40
35
30
25
20
15
10
5
TJ = 150 °C
TJ = 200 °C
TJ = 235 °C
10
1
0.1
TJ = 25 °C
0.01
TJ = 60 °C
TJ = 100 °C
0
0.001
200
205
210
215
220
0
0.0
0.2
0.4
Forward Voltage, VF (V)
Figure 4. IF vs. VF Typical Characteristics
100
0.6
0.8
1.0
1.2
Case Temperature, TC (°C)
Figure 3. Power Dissipation Curves(2)
1.E-03
1.E-04
1.E-05
1.E-06
1.E-07
1.E-08
1.E-09
1.E-10
TJ = 235 °C
TJ = 200 °C
10
1
TJ = 150 °C
TJ = 100 °C
TJ = 60 °C
0.1
0.01
TJ = 25 °C
t = 80 µs
26
28
30
32
34
0
5
10
15
20
25
Reverse Voltage, VZ (V)
Reverse Voltage, VR (V)
Figure 5. IR vs. VR Typical Characteristics
Figure 6. IZ vs. VZ Typical Characteristics
(2) See Figure 1 for the measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
5
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
10
1
0.1
0.01
0.001
Between Junction and Cace
Heat sink: ADC12 (30 × 30 × 4 mm)
0.001
0.01
0.1
1
10
100
Pulse Width (s)
Figure 7. Typical Transient Thermal Resistance (3)
SG-C17VLZ27S, SG-C17VLZ27R Rating and Characteristic Curves
100
60
50
40
30
20
10
0
TJ = 150 °C
TJ = 200 °C
TJ = 235 °C
10
1
0.1
TJ = 25 °C
TJ = 60 °C
0.01
TJ = 100 °C
0.001
0
200
205
210
215
220
0.0
0.2
0.4
Forward Voltage, VF (V)
Figure 9. VF vs. IF Typical Characteristics
0.6
0.8
1.0
1.2
Case Temperature, TC (°C)
Figure 8. Power Dissipation Curves (4)
(3) See Figure 1 for measurement conditions of lead temperature.
(4) See Figure 1 for measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
6
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
1.E-03
1.E-04
1.E-05
1.E-06
1.E-07
1.E-08
1.E-09
100
10
TJ = 235 °C
TJ = 200 °C
TJ = 150 °C
TJ = 100 °C
TJ = 60 °C
1
0.1
0.01
TJ = 25 °C
t = 80 µs
30
1.E-10
0
26
27
28
29
31
5
10
15
20
25
Reverse Voltage, VZ (V)
Reverse Voltage, VR (V)
Figure 10. VR vs. IR Typical Characteristics
10
Figure 11. IZ vs. VZ Typical Characteristics
1
0.1
0.01
0.001
Between Junction and Cace
Heat sink: ADC12 (30 × 30 × 4 mm)
0.001
0.01
0.1
Pulse Width (s)
1
10
100
Figure 12. Typical Transient Thermal Resistance (5)
(5) See Figure 1 for the measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
7
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
SG-C17VVZ27S, SG-C17VVZ27R Rating and Characteristic Curves
100
70
60
50
40
30
20
10
0
TJ = 150 °C
TJ = 200 °C
TJ = 235 °C
10
1
0.1
TJ = 25 °C
TJ = 60 °C
0.01
TJ = 100 °C
0.001
200
205
210
215
220
0.0
0.2
0.4
Forward Voltage, VF (V)
Figure 14. VF vs. IF Typical Characteristics
0.6
0.8
1.0
1.2
0
Case Temperature, TC (°C)
Figure 13. Power Dissipation Curves (6)
1.E-03
1.E-04
1.E-05
1.E-06
1.E-07
1.E-08
1.E-09
1.E-10
100
TJ = 235 °C
TJ = 200 °C
TJ = 150 °C
10
1
TJ = 100 °C
TJ = 60 °C
0.1
0.01
TJ = 25 °C
t = 80 µs
0
5
10
Reverse Voltage, VR (V)
Figure 15. VR vs. IR Typical Characteristics
15
20
25
26
27
Reverse Voltage, VZ (V)
Figure 16. IZ vs. VZ Typical Characteristics
28
29
30
(6) See Figure 1 for the measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
8
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
10
1
0.1
0.01
0.001
Between Junction and Cace
Heat sink: ADC12 (30 × 30 × 4 mm)
0.001
0.01
0.1
Pulse Width (s)
1
10
100
Figure 17. Typical Transient Thermal Resistance(7)
SG-C17VWZ27S, SG-C17VWZ27R Rating and Characteristic Curves
100
90
80
70
60
50
40
30
20
10
0
TJ = 150 °C
TJ = 200 °C
TJ = 235 °C
10
1
0.1
TJ = 25 °C
TJ = 60 °C
TJ = 100 °C
0.01
0.001
0
200
205
210
215
220
0.0
0.2
0.4
Forward Voltage, VF (V)
Figure 19. VF vs. IF Typical Characteristics
0.6
0.8
1.0
1.2
Case Temperature, TC (°C)
Figure 18. Power Dissipation Curves (8)
(7) See Figure 1 for the measurement conditions of lead temperature.
(8) See Figure 1 for the measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
9
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
TJ = 235 °C
TJ = 200 °C
1.E-03
1.E-04
1.E-05
1.E-06
1.E-07
1.E-08
100
10
TJ = 150 °C
TJ = 100 °C
TJ = 60 °C
1
0.1
0.01
TJ = 25 °C
t = 80 µs
1.E-09
0
26
27
28
29
5
10
15
20
25
Reverse Voltage, VZ (V)
Reverse Voltage, VR (V)
Figure 20. VR vs. IR Typical Characteristics
10
Figure 21. IZ vs. VZ Typical Characteristics
1
0.1
0.01
0.001
Between Junction and Cace
Heat sink: ADC12 (30 × 30 × 4 mm)
0.001
0.01
0.1
Pulse Width (s)
1
10
100
Figure 22. Typical Transient Thermal Resistance (9)
(9) See Figure 1 for the measurement conditions of lead temperature.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
10
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Physical Dimensions
● Pressfit
+0.04
-0.03
φ12.80
φ11.4
φ1.26±0.1
Knurling
80°
Bottom
φ8
NOTES:
- Dimensions in millimeters
- Knurling number: 78
- Lead treatment: Pb-free (RoHS compliant)
- Must be pressfit into the heatsink when used.
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
11
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
● Heatsink
- Recommended hole size and interference: See Figure 23
- Recommended heatsink material: ADC12 or the aluminum die-casting that has same characteristics as ADC12
- Recommended heatsink material strength: 140 to 160 Hv
● How to Pressfit
Note followings when the product is pressed into the heatsink.
- Press pin contact area: See Figure 24 (The press pin must not be pressed to “No press area”)
- Recommended press pin form: See Figure 25
- Contact area between the press pin and the product: ≥30 mm2 (If the contact area is too small, the product package
is deformed and the product damage may be caused.)
- Maximum press load: ≤10,000 N (See Figure 26)
ϕ8mm
Press pin
contact area
Heat sink
Heat sink
No press area
ϕ12.64
ϕ12.69
0.04
0.10
Unit: mm
Figure 23 Recommended Hole Size and Interference
Figure 24 Press Pin Contact Area
10,000 N (max.)
Press pin
Distance
Figure 25 Recommended Press Pin Form
Figure 26 Maximum Press Load
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
12
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Marking Diagram
Specific Device Code (See Table 1)
YMDDX
Lot Number:
Y is the last digit of the year of manufacture (0 to 9)
M is the month of the year (1 to 9, O, N, or D)
DD is the day of the month (01 to 31)
X is control number
Table 1. Specific Device Code
Specific Device Code
Part Number
AC27S
AC27R
BC27S
BC27R
DC27S
DC27R
HC27S
HC27R
SG-C17LXZ27S
SG-C17LXZ27R
SG-C17VLZ27S
SG-C17VLZ27R
SG-C17VVZ27S
SG-C17VVZ27R
SG-C17WVZ27S
SG-C17WVZ27R
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
13
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17xxZ27
Important Notes
● All data, illustrations, graphs, tables and any other information included in this document (the “Information”) as to Sanken’s
products listed herein (the “Sanken Products”) are current as of the date this document is issued. The Information is subject to any
change without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales
representative that the contents set forth in this document reflect the latest revisions before use.
● The Sanken Products are intended for use as components of electronic equipment or apparatus (transportation equipment and its
control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the
Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products
and return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (traffic
signal control systems or equipment, disaster/crime alarm systems, etc.), you must contact a Sanken sales representative to discuss
the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken
Products and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any
applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical
equipment or systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in Class
III or a higher class as defined by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or
responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, resulting from
the use of the Sanken Products in the Specific Applications or in manner not in compliance with the instructions set forth herein.
● In the event of using the Sanken Products by either (i) combining other products or materials or both therewith or (ii) physically,
chemically or otherwise processing or treating or both the same, you must duly consider all possible risks that may result from all
such uses in advance and proceed therewith at your own responsibility.
● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the
occurrence of any failure or defect or both in semiconductor products at a certain rate. You must take, at your own responsibility,
preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which
the Sanken Products are used, upon due consideration of a failure occurrence rate and derating, etc., in order not to cause any
human injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products.
Please refer to the relevant specification documents and Sanken’s official website in relation to derating.
● No anti-radioactive ray design has been adopted for the Sanken Products.
● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all
information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of
use of the Sanken Products.
● Sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third
party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you,
users or any third party, resulting from the Information.
● No information in this document can be transcribed or copied or both without Sanken’s prior written consent.
● Regarding the Information, no license, express, implied or otherwise, is granted hereby under any intellectual property rights and
any other rights of Sanken.
● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied,
including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty
of merchantability, and implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is
delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course
of dealing or usage of trade, and (iv) as to the Information (including its accuracy, usefulness, and reliability).
● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and
regulations that regulate the inclusion or use or both of any particular controlled substances, including, but not limited to, the EU
RoHS Directive, so as to be in strict compliance with such applicable laws and regulations.
● You must not use the Sanken Products or the Information for the purpose of any military applications or use, including but not
limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Information, or
providing them for non-residents, you must comply with all applicable export control laws and regulations in each country
including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and
follow the procedures required by such applicable laws and regulations.
● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including
the falling thereof, out of Sanken’s distribution network.
● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is
error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting
from any possible errors or omissions in connection with the Information.
● Please refer to our official website in relation to general instructions and directions for using the Sanken Products, and refer to the
relevant specification documents in relation to particular precautions when using the Sanken Products.
● All rights and title in and to any specific trademark or tradename belong to Sanken and such original right holder(s).
DSGN-AEZ-16003
SG-C17xxZ27-DSE Rev.1.2
Oct. 20, 2017
SANKEN ELCTRIC CO., LTD.
http://www.sanken-ele.co.jp/en
14
© SANKEN ELECTRIC CO., LTD. 2016
SG-C17LXZ27S 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| SG-C17VLZ | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZ27R | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZ27S | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZ40 | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZ40R | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZ40S | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZR | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VLZS | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VVZ27R | SANKEN | Automotive Alternator Diode | 获取价格 |
|
| SG-C17VVZ27S | SANKEN | Automotive Alternator Diode | 获取价格 |
|
SG-C17LXZ27S 相关文章
强制中企出售股权，英国半导体领域渐成中企投资禁区
- 2024-11-08
- 22
台积电拟对大陆AI公司禁运7nm及以下工艺，引发业界关注
- 2024-11-08
- 15
锐成芯微推出基于8nm工艺的PVT Sensor IP，引领芯片技术创新
- 2024-11-08
- 16
苹果与富士康接洽，商讨在中国台湾生产AI服务器
- 2024-11-08
- 14
