STR-L6472 [SANKEN]
Power IC for Quasi-Resonant Type Switching Power Supply with High Efficiency, Low Noise; 电源IC准谐振式开关电源具有高效率,低噪音型号: | STR-L6472 |
厂家: | SANKEN ELECTRIC |
描述: | Power IC for Quasi-Resonant Type Switching Power Supply with High Efficiency, Low Noise |
文件: | 总2页 (文件大小:80K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STR-L6400 Series
Power IC for Quasi-Resonant Type Switching Power Supply
with High Efficiency, Low Noise and Low Standby Power
in Full Load Range
Low-Height and Enough Creepage Isolation (>6mm)
between High and Low Voltage Terminals
■
General Descriptions
The STR-L6400 series products are power ICs for quasi-resonant switching type power
supplies, incorporating a power MOSFET and a controller IC. The product achieves high
efficiency and low noise power supply systems across the full load range, by the low standby
power, the quasi-resonant operation, the bottom-skip quasi-resonant operation, and the
burst-oscillation. The product is recommended for the systems requiring low-height and enough
clearance and creepage isolation between high and low voltage terminals.
The STR-Y6400 series products are the different package (TO-220F) versions.
SIP10L
■
Features
ꢀ
Multi-Mode Control
The operation mode switching with four steps according to load conditions achieves the optimal high efficiency and
low noise power supply systems across the full load range.
・In Standby: Auto Standby (Auto Burst-Oscillation)
・Under Low to Middle Load Conditions: 1 or 2 Bottom-Skip Quasi-Resonant Operation (Bottom-Skip QR)
・Under Middle to Rating (or Heavy) Load Conditions: Quasi-Resonant Operation (QR)
Current-Mode Control
Bottom-Skip Function with Delay Time Setting, enabling stable switching
Built-in Startup Circuit, enabling low power consumption
Auto-Standby Function with Burst-Oscillation, enabling low standby power(Input power PIN < 100mW at no load)
Soft-ON Function, preventing the audible noise from transformer, during the standby operation (burst-oscillation)
and the dynamic load change.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
SIP10L Package (Sanken designation : STA10L), recommended for auxiliary power supplies of White Goods
Straight lead pitch: 2.54mm, Height over PCB: < 12mm
Clearance and Creepage Isolation between high and low voltage terminals: 6.5mm (3 pins removed)
Soft-Start Function
Step-Drive Function, reducing switching noise
Leading Edge Blanking Function
External ON/OFF Function
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Built-in Avalanche Energy Guaranteed High-Voltage Power MOSFET
Various Protections
Overcurrent Protection (OCP)-------- Pulse-by-Pulse with AC Input Compensation Function
Overload Protection (OLP) ----------- Latch Shutdown or Auto-Restart Option by changing external components
Overvoltage Protection (OVP) ------- Latch Shutdown
■
■
Applications
Switching Power Supplies for
Home Appliances (White Goods), Digital Consumer Equipment, OA Equipment, Industry Machines,
Communication Devices, Others
Product Lineup
(Note 1,2)
MOSFET
VDSS MIN (V)
RDS(ON)
MAX (Ω)
POUT
Product No
100V / 220V
STR-L6472
850
6.5
15W / 25W
Note 1: The maximum output power is derived from thermal specifications. The actual output power may be available
around 120 –140% of the above values, respectively, but may be limited by ON duty setting on transformer
design or lower output voltage.
Note 2: The condition of the maximum output power is “without heat sink”.
2010/08
■
Typical Application Circuit
VAC
VOUT
STR-L6400
GND
1
2
3
6
D/Startup Vcc
BD
8
7
Cont.
FB
ADJ
OCP
10
S/GND
5
9
■
Package Information
SIP10L (Sanken designation : STA10L)
Dimensions between
roots
Dimensions between roots
Warning
ꢀ The contents in this document are subject to changes, for improvement and other purposes, without notice.
Make sure that this is the latest version of the document before use.
ꢀ The operation and circuit examples in this document are provided for reference purposes only. Sanken assumes no liability for violation of industrial property, intellectual property, or other rights of
Sanken or third parties, that stem from these examples.
ꢀ The user must take responsibility for considering and determining which objects the products in this document are used with.
ꢀ Although Sanken will continue to improve the quality and reliability of its products,
semiconductor products, by their nature, have certain fault and failure rates. The user must take responsibility for designing and checking to secure the device and system so that a part failure may not lead
to human injury, fire, damages, or other losses.
ꢀ The contents in this document must not be transcribed or copied without Sanken’s written consent.
SANKEN ELECTRIC CO.,LTD.
2010/08
相关型号:
©2020 ICPDF网 联系我们和版权申明