SET40-203APF-F-S 概述
Large Power Relay
SET40-203APF-F-S 数据手册
通过下载SET40-203APF-F-S数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载version:V1.1
SANYOU RELAYS
Large Power Relay
SET40-Series
Relays for advanced technology
Features
40A switching capability
4KV dielectric between coil and contact
Strong load capacity
Have 2 groups of Normal open contacts
3mm contacts gap for safty design
●
●
●
●
●
●
●
UL insulation: Class F insulation is available
Environment friendly product(Compliant with RoHS)
Safety Approval
UL,C-UL File No.:applying
VDE File No.:applying
applying
TUV File No.:
Contact Capacity
Model
SET40
40A 250VAC
40A
Nominal switching capacity (res. load)
Max. switching current
Max. switching voltage
Max. switching power
277VAC
10,000VA
Characteristic Data
Contact material
Silver alloy
100mΩ Max.
Initial contact resistance (at 6VDC 1A)
Operate time (at nominal volt.)
Release time (at nominal volt.)
Initial insulation resistance
30msec. Max. (DC Type)
30msec. Max. (DC Type)
1,000MΩ Min.(DC500V)
Between open contacts:
Between coil and contact:
Between contact sets:
Functional
AC2,000V,50/60Hz 1min.
Initial dielectric strength
AC4,000V,50/60Hz 1min.
AC2,000V,50/60Hz 1min.
10~55Hz at double amplitude of 1.5 mm
Vibration resistance
10~55Hz at double amplitude of 1.5 mm
Destructive
Functional
Destructive
10G Min.
Shock resistance
100G Min.
Endurance
(operations)
(at 10,800 ops./h)
(at 360 ops./h)
10,000,000
30,000
Mechanical
Electrical
Ambient temperature
Unit weight
-40℃~+85℃ (no condensation)
Approx. 130.0 g
Coil Data (at 20℃)
Nominal
Nominal
Nominal
operating
power
Coil
resistance
±10% (Ω)
4.7
Max.
allowable
voltage
Pick-up
voltage
(Max.)
Drop-out
voltage
(Min.)
operating
voltage
(VDC)
current
±10% (mA)
3
6
12
24
638.30
319.15
160.00
80.00
18.8
75
300
110% of
Nominal
voltage
80 % of
Nominal
voltage
10 % of
Nominal
voltage
Approx.
1.90W
48
100
110
200
40.00
19.23
17.26
9.52
1200
5200
6300
21000
1/6
SET40
Nominal
operating
current
Nominal
operating
power
Pick-up
voltage
(Max.)
Nominal
voltage
(VAC)
Coil
Max.
Drop-out
voltage
(Min.)
allowable
voltage
resistance
±10% (Ω)
±10% (mA)
18.8
275.00
138.00
74.00
6
12
24
75
300
110% of
Nominal
voltage
80 % of
Nominal
voltage
10 % of
Nominal
voltage
1.7~2.5VA
1200
5200
20800
39.00
18.7/22.1
9.7/10.8
48
100/120
220/240
Safety Approval Ratings
(Note:More detail of approval ratings,please refer to the safety certification)
CQC
TUV
VDE
UL/CUL
Approval
applying
applying
applying
applying
File No.
40A 250VAC
40A 250VAC
40A 250VAC
40A 250VAC
Approved ratings
Ordering Information
Nomenclature
SET40 - 2 12 D
-
B
F
-S
-XX
F
Special Parameter:Nil-Standard type,
Letters or Numbers-Special reqirements
S-with microswitch + wire, S1-with microswitch + connector
Insulation System:Nil-Standard, B-Class B, F-Class F
Cover Form: F- flange cover, Nil-non-flange cover
Contact material:Nil-AgSnO2
Terminal Form: B- screw terminal, T- quick connection terminal,
P- PCB terminal
Coil Power:D-DC coil,A-AC coil
Coil Voltage(VDC):03,06,12,24, 48, 100, 110, 200
Coil Voltage(VAC):06, 12, 24, 48, 120, 220/240
Number of Poles:2-2 Pole
Type Designation:SET40
Outline Dimensions, Wiring Diagram, P.C.
Board Layout (unit:mm)
SET40-BF
Wiring Diagram
P.C.B layout(Bottom view)
2/6
SET40
SET40-TF
Wiring Diagram
P.C.B layout(Bottom view)
SET40-T
Wiring Diagram
P.C.B layout(Bottom view)
Unless otherwise specified:
If dimension <1mm, tolerance: ±0.2mm;
If dimension 1~5mm, tolerance: ±0.3mm;
If dimension >5mm, tolerance: ±0.4mm.
Note: 1. Extended terminal dimension is dimension before soldering.
2. Tolerance of P.C.B. layout:±0.1mm.
3/6
SET40
SET40-PF
Wiring Diagram
P.C.B layout(Bottom view)
SET40-P
Wiring Diagram
P.C.B layout(Bottom view)
4/6
SET40
Typical Applications
Especially suitable for Photovoltaic inverter,UPS,charging pile etc
●
Characteristic Curves
Endurance Curve
Max. Switching Power
100
500
100
50
AC Res.
40
20
10
5
50
25
250VAC Res.
1
0.5
10
3
0.1
0
4
8
12 16 20 24 2830 32 36 40
1
10
20 30 50
200 300
1000
100
Contact Voltage(V)
Contact Current(A)
5/6
SET40
Cautions
●Assembly
●Reference data
·Installation at dry and less dust place.
·AC100V as standards if the rated voltage is AC100V~120V.
●Coil operation
·
The PCB terminals'weight is approx. 100g. Pls. mind its strength.
In addition,the heat will cause reduction of welding cracks.
So pls. use through hole type board.
<Coil inner circuit drawing>
·AC operation coil
·DC operation coil
●Load
This relay is used for motor,transformer,spiratron,lamp,heater,etc.
Pls. don't use for tiny load.
●Soldering
·Manual soldering, pls. avoid automatic soldering. Sometimes
flux will stick on the test button which cause NG operation.
·It's not sealed structure which can't be washable.
·When it's drived by transistor, pls. sure the electric leakage,
connect the bleeder resistance if necessary.
●Connection
·When it's the screw terminals, the terminal space size as reference below.
·There is full-wave rectifier circuit in AC operation coil. If use
SSR or bi-directional triode to drive relay which will cause
reset NG. Pls. confirm on the actual equipment if it has this
situation.
Screw terminals
Coil terminals side
Contacts terminals side
·Pls. leave room on wire when wiring. Do not put too much force
on terminals.
·Fasten torque
Coil terminals: 0.98 N.m
Contacts terminals: 1.37 N.m
·Installation torque
·m
0.98N
·Pls. do not put too much force when push and pull plug socket.
Also, do it one by one, do not at the same time or at an oblique angle.
·Pls. avoid connecting the QC terminals by soldering.
Note: If use the hole terminal, pls. sure the current is less 30A.
Disclaimer:
This datasheet is the customers' reference. All the specification are subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application.Thus the
user should in a right position to choose the suitable product for their own application.If there is any query,
please contact Sanyou for the technical service.However it is the user's responsibility to determine which
product should be used only.
Sanyou Corporation Limited ,All rights of Sanyou to reserved
6/6
SET40-203APF-F-S 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
SET40-203APF-F-S1 | SANYOU | Large Power Relay | 获取价格 | |
SET40-203ATF-B-S | SANYOU | Large Power Relay | 获取价格 | |
SET40-203ATF-B-S1 | SANYOU | Large Power Relay | 获取价格 | |
SET40-203ATF-F-S | SANYOU | Large Power Relay | 获取价格 | |
SET40-203ATF-F-S1 | SANYOU | Large Power Relay | 获取价格 | |
SET40-203DBF-B-S | SANYOU | Large Power Relay | 获取价格 | |
SET40-203DBF-B-S1 | SANYOU | Large Power Relay | 获取价格 | |
SET40-203DBF-F-S | SANYOU | Large Power Relay | 获取价格 | |
SET40-203DBF-F-S1 | SANYOU | Large Power Relay | 获取价格 | |
SET40-203DPF-B-S | SANYOU | Large Power Relay | 获取价格 |
SET40-203APF-F-S 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6