STK4131V [SANYO]

AF Power Amplifier (Split Power Supply) (20 W + 20 W min, THD = 0.08%); 自动对焦功率放大器(分体式电源) ( 20 W + 20瓦分钟, THD = 0.08 % )
STK4131V
型号: STK4131V
厂家: SANYO SEMICON DEVICE    SANYO SEMICON DEVICE
描述:

AF Power Amplifier (Split Power Supply) (20 W + 20 W min, THD = 0.08%)
自动对焦功率放大器(分体式电源) ( 20 W + 20瓦分钟, THD = 0.08 % )

放大器 功率放大器
文件: 总3页 (文件大小:54K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Ordering number : EN4478A  
Thick Film Hybrid IC  
STK4131V  
AF Power Amplifier (Split Power Supply)  
(20 W + 20 W min, THD = 0.08%)  
Features  
Package Dimensions  
• Built-in muting circuit cuts off various kinds of pop  
unit : mm  
noises.  
4040  
• Current mirror circuit provides low distortion (THD =  
0.08%).  
[STK4131V]  
• Pin compatible with the STK4102II series, forming a  
series of products with output powers from 15 W/ch to  
120 W/ch.  
Specifications  
Maximum Ratings at Ta = 25°C  
Parameter  
Maximum supply voltage  
Thermal resistance  
Symbol  
max  
Condition  
Rating  
±37  
Unit  
V
V
CC  
θj-c  
2.6  
150  
125  
°C/W  
°C  
Junction temperature  
T max  
j
Operating case temperature  
Storage temperature  
T
c
°C  
Tstg  
–30 to +125  
2
°C  
Available time for load shorted  
t
V
= ±24.5 V, R = 8 , f = 50 Hz, P = 20 W  
s
s
CC  
L
O
Recommended Operating Conditions at Ta = 25°C  
Parameter  
Recommended supply voltage  
Load resistance  
Symbol  
Condition  
Rating  
±24.5  
8
Unit  
V
V
CC  
R
L
Operating Characteristics  
at Ta = 25°C, V = ±24.5 V, R = 8 , Rg = 600 , VG = 40 dB, R : non-inductive load  
CC  
L
L
Rating  
typ  
Parameter  
Symbol  
Condition  
min  
max  
100  
Unit  
mA  
W
Quiescent current  
Output power  
ICCO  
V
= ±29.5 V  
20  
20  
20  
40  
CC  
P
O (1)  
O (2)  
THD = 0.08%, f = 20 Hz to 20 kHz  
P
V
P
= ±21.5 V, THD = 0.2%, R = 4 , f = 1 kHz  
W
CC  
L
Total harmonic distortion  
Frequency response  
THD  
f , f  
= 1 W, f = 1 kHz  
+0  
0.08  
%
O
O
O
P
= 1 W,  
dB  
20 to 50 k  
55  
Hz  
L
H
–3  
Input resistance  
Output noise voltage  
Neutral voltage  
Muting voltage  
r
P
V
V
= 1 W, f = 1 kHz  
kΩ  
mVrms  
mV  
i
VNO  
VN  
= ±29.5 V, Rg = 10 kΩ  
1.2  
+70  
–10  
CC  
CC  
= ±29.5 V  
–70  
–2  
0
VM  
–5  
V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters  
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN  
N3096HA (OT)/73093YO 5-2290 No. 4478-1/3  
STK4131V  
Specified Transformer Power Supply (RP-25 equivalent)  
Notes  
• Use a constant voltage power supply for the test power supply unless otherwise noted.  
• Use the transformer power supply shown in the figure above when measuring the available time for load shorted and the output noise voltage.  
• The output noise voltage is the peak value measured with an averaging rms scale volt meter (VTVM). A 50 Hz AC stabilized power supply should be used  
to eliminate the effects of AC primary line flicker noise when an AC power supply is used.  
Equivalent Circuit  
No. 4478-2/3  
STK4131V  
Sample Application Circuit: 20 W (minimum) 2-channel AF power amplifier  
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace  
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of  
which may directly or indirectly cause injury, death or property loss.  
Anyone purchasing any products described or contained herein for an above-mentioned use shall:  
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and  
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all  
damages, cost and expenses associated with such use:  
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on  
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees  
jointly or severally.  
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for  
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied  
regarding its use or any infringements of intellectual property rights or other rights of third parties.  
This catalog provides information as of November, 1996. Specifications and information herein are subject to  
change without notice.  
No. 4478-3/3  

相关型号:

STK4132

2ch AF Power Amplifier (Split Power Supply) 20W + 20 W, THD =1%
SANYO

STK4132

2ch AF Power Amplifier (Split Power Supply)
ISC

STK4132II

2ch AF Power Amplifier (Split Power Supply) 20W + 20 W, THD =1%
SANYO

STK4132V

Features of the IMST Hybird ICs
ETC

STK4140MK2

2ch./1packge, +- Power Supply 6W/ch. ~ 100W/ch. THD=0.4%
SANYO

STK4140MK5

STK Audio Power Amplifier
SANYO

STK4141

2ch./1packge, +- Power Supply Built-in Muting Circuit 25W/ch. ~ 70W/ch. THD=0.02%
SANYO

STK4141II

2-CHANNEL AF POWER AMP
ETC

STK4141V

AF Power Amplifier (Split Power Supply) (25W + 25W min, THD = 0.08%)
SANYO

STK4141X

2ch./1packge, +- Power Supply Built-in Muting Circuit 25W/ch. ~ 70W/ch. THD=0.02%
SANYO

STK4141XSERIES

Dual Audio Amplifier
ETC

STK4142

AF Power Amplifier (Split Power Supply)
SANYO