STK416-100-E [SANYO]
Thick-Film Hybrid IC 3-Channel Power Switching Audio Power IC, 80W+80W+80W; 厚膜混合IC 3通道电源开关音响电源IC , 80W + 80W + 80W型号: | STK416-100-E |
厂家: | SANYO SEMICON DEVICE |
描述: | Thick-Film Hybrid IC 3-Channel Power Switching Audio Power IC, 80W+80W+80W |
文件: | 总12页 (文件大小:212K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ordering number : EN*A1621
Thick-Film Hybrid IC
3-Channel Power Switching
Audio Power IC, 80W+80W+80W
STK416-090-E
Overview
The STK416-090-E is a class H audio power amplifier hybrid IC that features a built-in power supply switching circuit.
This IC provides high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the
power devices according to the detected level of the input audio signal.
Applications
• Audio power amplifiers.
Features
• Pin-to-pin compatible outputs ranging from 80W to 180W.
• Can be used to replace the STK415-100 series (2-channel models) and the class-AB series (2, 3-channel models) due to
its pin compatibility.
• Pure complementary construction by new Darlington power transistors
• Output load impedance: R = 8Ω to 4Ω supported
L
• Using insulated metal substrate that features superlative heat dissipation characteristics that are among the highest in the
industry.
Series Models
STK416-090-E
80W×3ch
50W×3ch
60V
STK416-100-E
90W×3ch
60W×3ch
65V
STK416-120-E
120W×3ch
80W×3ch
73V
STK416-130-E
150W×3ch
100W×3ch
80V
Output 1 (10%/1kHz)
Output 2 (0.8%/20Hz to 20kHz)
Max. rated V (quiescent)
H
Max. rated V (quiescent)
L
41V
42V
45V
46V
Recommended operating V (8Ω)
38V
39V
46V
51V
H
Recommended operating V (8Ω)
27V
29V
32V
34V
L
Dimensions (excluding pin height)
78.0mm×44.1mm×9.0mm
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'
s products or
equipment.
21710HKIM No. A1621-1/12
STK416-090-E
Specifications
Absolute maximum ratings at Ta=25°C (excluding rated temperature items), Tc=25°C unless otherwise specified
Parameter
Symbol
max (1)
max (2)
max (3)
max (1)
max (2)
max (3)
Conditions
Ratings
Unit
V
V
V
V
V
V
maximum quiescent supply voltage 1
maximum supply voltage 2
maximum supply voltage 3
maximum quiescent supply voltage 1
maximum supply voltage 2
maximum supply voltage 3
V
V
V
V
V
V
V
When no signal
60
53
43
41
36
29
60
V
H
H
H
L
H
H
H
L
R ≥6Ω
V
L
R ≥4Ω
V
L
When no signal
V
R ≥6Ω
V
L
L
L
R ≥4Ω
V
L
L
L
Maximum voltage between V
V
*4
-V max
L
No loading
V
H and
L
H
Standby pin maximum voltage
Thermal resistance
Vst max
θj-c
-0.3 to +5.5
2.1
V
Per power transistor
°C/W
°C
°C
°C
Junction temperature
Tj max
Tc max
Tstg
Both the Tj max and Tc max conditions must be met.
150
IC substrate operating temperature
Storage temperature
125
-30 to +125
Allowable load shorted time
*3
ts
V
P
= 38V, V = 27V, R =8Ω, f=50Hz,
L L
=50W, 1-channel active
H
O
0.3
s
Electrical Characteristics at Tc=25°C, R =8Ω (non-inductive load), Rg=600Ω, VG=40dB, VZ=15V
L
Conditions *1
Ratings
Parameter
Symbol
unit
W
V
f
P
THD
(%)
O
min
typ
max
(V)
(Hz)
(W)
Output power
P
(1)
(2)
V
H
38
27
O
20 to 20k
0.8
0.8
50
V
L
P
V
30
23
O
H
1k
R =4Ω
50
0.4
L
V
L
Total harmonic distortion
Frequency characteristics
Input impedance
THD
V
38
27
H
20 to 20k
50
1.0
1.0
%
Hz
V
L
f , f
V
38
27
L
H
H
+0 -3dB
20 to 50k
55
V
L
ri
V
38
27
H
1k
kΩ
V
L
Output noise voltage
Quiescent current
*2
V
V
45
30
NO
H
Rg=2.2kΩ
1.0
mVrms
mA
mV
V
V
L
I
V
45
30
40
CCO
H
R =∞
L
V
V
150
L
Output neutral voltage
V
45
30
N
H
-70
2.5
0
0
+70
0.6
V
L
Pin 17 voltage when
standby ON
VST ON
V
38
27
H
Standby
*7
*7
V
L
Pin 17 voltage when
standby OFF
VST OFF
V
38
27
H
Operating
3.0
V
V
L
[Remarks]
*1: Unless otherwise specified, use a constant-voltage power supply to supply power when inspections are carried out.
*2: The output noise voltage values shown are peak values read with a VTVM. However, an AC stabilized (50Hz)
power supply should be used to minimize the influence of AC primary side flicker noise on the reading.
*3: Use the designated transformer power supply circuit shown in the figure below for the measurements of allowable
load shorted time and output noise voltage.
*4: Design circuits so that (|V |-|V |) is always less than 40V when switching the power supply with the load
H
L
connected.
*5: Set up the V power supply with an offset voltage at power supply switching (V -V ) of about 8V as an initial
L
L
O
target.
*6: Please connect –Pre V
by reverse bias.
pin (#5 pin) with the stable minimum voltage and connect so that current does not flow in
CC
*7: Use the standby pin (pin 17) so that the applied voltage never exceeds the maximum rating.
The power amplifier is turned on by applying +2.5V to +5.5V to the standby pin (pin 17).
Continued on next page.
No. A1621-2/12
STK416-090-E
Continued from preceding page.
*8: Thermal design must be implemented based on the conditions under which the customer’s end products are
expected to operate on the market.
*9: The thermoplastic adhesive is used to bond the case and the aluminum substrate, so, please be sure to fix the Hybrid
IC on the heat sink before soldering and mount it. In addition, please attach and remove the heat sink at normal
temperature.
*10: Weight of HIC: 36.8g
Outer carton dimensions (W×L×H): 452mm×325mm×192mm
DBA40C
DBA40C
10000μF
10000μF
+V
+V
H
L
+
+
500Ω
500Ω
500Ω
500Ω
+
+
-V
-V
H
L
10000μF
10000μF
Designated transformer power supply
(MG-250 equivalent)
Designated transformer power supply
(MG-200 equivalent)
Package Dimensions
unit:mm (typ)
78.0
70.0
9.0
(R1.8)
1
23
0.4
2.9
5.5
3.6
2.0
0.5
(13.0)
22 2.0=44.0
No. A1621-3/12
STK416-090-E
Internal Equivalent Circuit
19
18
11 10
12
7
3
1
Pre Driver
CH1
Pre Driver
CH2
Comparator
15
16
2
Stand-by Circuit
5
4
6
Pre Driver
CH3
Comparator
SUB
13
17
14
12
9
8
21
23 22
20
Test Circuit
STK416-100-E series
+OFF-OFF
+V -V SET SET -Pre -V
OUT OUT OUT OUT
IN NF ST
NF IN
IN NF OUT OUT
+V Ch1+Ch1- Ch2+ Ch2- +Pre SUB GND Ch1 Ch1 BY Ch2 Ch2 Ch3 Ch3 Ch3+Ch3-
L
L
H
H
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23
1
2
3
R30
Stand-by
Ch3-IN
C23
C24
R28
C22
R19
C08
C18
R07
R23
R24
R26
D03 D04
C21
C17
R18
R20
C09
R22
C20
C19
R21
Ch2-IN
GND
R14
C13
R15
C14
R16
C15
C07
R06
R05
C16
Ch1-IN
+V
H
R03
C05
C01
L03
D01
Ch3-OUT
Ch2-OUT
+V
L
R13
C03
R01
R02
L02
GND
C04
R12
C11
R09
C12
R10
C06
-V
L
GND
D02
C02
R04
R08
C10
L01
-V
H
Ch1-OUT
R11
No. A1621-4/12
STK416-090-E
Recommended External Components
Recommended
Above Recommended
Value
Below Recommended
Value
Parts Location
Circuit Purpose
Value
R01, R02
1.5kΩ
Current for supply switch circuit (comparator)
is determined.
V
holding frequency
V holding frequency
H
H
range becomes large.
range becomes narrow.
Short-through current
may increase at high
frequency.
R03, R04
100Ω/1W
56kΩ
Resistance for ripple filter.
(Fuse resistance is recommended. Ripple filter is
constituted with C05, C06.)
-
R05, R06, R07
Input impedance is determined.
Output neutral voltage (VN) shift.
(It is referred that R05=R18, R06=R19, R07=R20)
R08, R09, R10
R11, R12, R13
R14, R15, R16
4.7Ω/1W
4.7Ω
Resistance for oscillation prevention.
Noise absorption resistance.
-
-
-
-
560Ω
Voltage gain (VG) is determined with R18, R19, R20.
(As for VG, it is desirable to set up by R14, R15, R16.)
Voltage gain (VG) is determined with R14, R15, R16
It may oscillate.
With especially no
problem
(VG<40dB)
R18, R19, R20
R21, R22, R23
R24, R26, R28
56kΩ
1kΩ
-
-
-
-
Resistance for input filters.
0.22Ω
±10%, 5W
Note*6
Output emitter resistor
Decrease of maximum
output power
It may cause thrmal
runaway
(Metal-plate Resistor is recommended.)
R30
Select restriction resistance, for the impression voltage of ‘#17 (stand-by) pin’ must not exceed the maximum
rating.
C01, C02
100μF/100V
100μF/50V
100μF/100V
Capacitor for oscillation prevention.
•Locate near the HIC as much as possible.
•Power supply impedance is lowered and stable
operation of the IC is carried out.
-
-
-
-
(Electrolytic capacitor is recommended.)
Capacitor for oscillation prevention.
•Locate near the HIC as much as possible.
•Power supply impedance is lowered and stable
operation of the IC is carried out.
C03, C04
C05, C06
(Electrolytic capacitor is recommended.)
Decoupling capacitor
The change in the ripple ingredient mixed in an input
side from a power supply line
•The ripple ingredient mixed in an input side is
removed from a power supply line.
(Ripple filter is constituted with R03, R04.)
Capacitor for oscillation prevention.
C07, C08, C09
C10, C11, C12
C13, C14, C15
3pF
0.1μF
It may oscillate.
It may oscillate.
Capacitor for oscillation prevention.
22μF/10V
Negative feedback capacitor.
The voltage gain (VG) of
low frequency is
The voltage gain (VG) of
low frequency decreases.
•The cutoff frequency of a low cycle changes.
(f =1/(2π•C13•R14))
extended. However, the
pop noise at the time of a
power supply injection
also becomes large.
L
C16, C17, C18
C19, C20, C21
2.2μF/50V
Input coupling capacitor (for DC current prevention.)
-
-
-
470pF
Input filter capacitor
•A high frequency noise is reduced with
the filter constituted by R21, R22, R23.
Capacitor for oscillation prevention.
-
C22, C23, C24
D01, D02
100pF
15V
It may oscillate.
Decide offset voltage for supply voltage ciecuit.
Decrease distortion at
supply voltage shift
Increase distortion at
supply voltage shift
D03, D04
3A/60V
Adverse current prevention diode
(FRD is recommended)
-
-
L01, L02, L03
3μH
Coil for oscillation prevention.
With especially
no problem
It may oscillate.
No. A1621-5/12
STK416-090-E
Sample PCB Trace Pattern
STK415-100-E-Sr/STK416-100-E-Sr PCB PARTS LIST
STK415, 416-100-E Series PCB Parts List
PCB Name: STK415/416sr-PCB C
Location No.
PARTS
RATING
Component
(*2) 2ch Amp doesn't mount parts of ( ).
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
R01, R02
ERG1SJ152
ERG1SJ101
RN16S563FK
ERX1SJ4R7
RN14S4R7FK
RN16S561FK
RN16S102FK
1.5kΩ, 1W
100Ω, 1W
56kΩ, 1/6W
4.7Ω, 1W
R03, R04
R05, R06, (R07), R18, R19, (R20)
R08, R09, (R10)
R11, R12, (R13)
R14, R15, (R16)
R21, R22, (R23)
R24, R26, (R28)
R25, R27, (R29)
R35, R36, (R37)
C01, C02, C05, C06
C03, C04
4.7Ω, 1/4W
560Ω, 1/6W
1kΩ, 1/6W
ERX2SJR22
-
0.22Ω, 5W (*1)
-
Short
-
-
Short
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
100MV100HC
100MV50HC
DD104-63CJ030C50
ECQ-V1H104JZ
10MV22HC
50MV2R2HC
DD104-63B471K50
DD104-63B101K50
GZA15X
100μF, 100V
100μF, 63V
3pF, 50V
0.1μF, 50V
22μF, 10V
2.2μF, 50V
470pF, 50V
100pF, 50V
VZ=15V
C07, C08, (C09)
C10, C11, (C12)
C13, C14, (C15)
C16, C17, (C18)
C19, C20, (C21)
C22, C23, (C24)
D01, D02
(*3)
D03, D04
ERC91-02SC
-
60V, 3A (FRD)
3μH
L01, L02, (L03)
Stand-by Control Circuit
Tr1
2SC1209 (Reference)
GMB05 (Reference)
RN16S512FK
RN16S102FK
RN16S333FK
RN16S202FK
10MV47HC
-
V
≥80V, I ≥10mA
CE
C
D05
Di
R30
R32
R33
R34
C25
2.7kΩ, 1/6W
1kΩ, 1/6W
33kΩ, 1/6W
2kΩ, 1/6W
47μF, 10V
-
J01, 02, J03, J04, J05, J06
(*1) Metal Plate Cement Resistor use.
(*2) STK415series (2ch Amp) doesn't mount parts of ( )
(*3) STK415-140-E uses GZA18X (ZD=18X) for D01, D02.
No. A1621-6/12
STK416-090-E
Pin Assignments
[STK433-000/-100/-200 Sr & STK415/416-100 Sr Pin Layout]
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
2ch class-AB
2ch classAB/2.00mm
STK433-030-E 30W/JEITA
STK433-040-E 40W/JEITA
STK433-060-E 50W/JEITA
STK433-070-E 60W/JEITA
-
-
+
V
C
C
O
U
T
/
O
U
T
/
O
U
T
/
O
U
T
/
+
P
R
E
I
N
F
/
S
T
A
N
D
|
N
F
/
I
P
R
E
V
C
C
S
U
B
•
G
N
D
N
/
N
/
C
H
1
C
H
1
C
H
2
C
H
2
C
H
1
C
H
1
-
C
H
2
C
H
2
-
G
N
D
STK433-090-E 80W/JEITA
STK433-100-E 100W/JEITA
STK433-120-E 120W/JEITA
STK433-130-E 150W/JEITA
B
Y
+
+
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
3ch class-AB
3ch classAB/2.00mm
STK433-230A-E 30W/JEITA
STK433-240A-E 40W/JEITA
STK433-260A-E 50W/JEITA
STK433-270-E 60W/JEITA
-
-
+
V
C
C
O
U
T
/
O
U
T
/
O
U
T
/
O
U
T
/
+
P
R
E
I
N
F
/
S
T
A
N
D
|
N
F
/
I
I
N
F
/
O
U
T
/
O
U
T
/
P
R
E
V
C
C
S
U
B
•
G
N
D
N
/
N
/
N
/
C
H
1
C
H
1
C
H
2
C
H
2
C
H
3
C
H
3
C
H
1
C
H
1
-
C
H
2
C
H
2
-
C
H
3
C
H
3
-
STK433-290-E 80W/JEITA
STK433-300-E 100W/JEITA
STK433-320-E 120W/JEITA
STK433-330-E 150W/JEITA
G
N
D
B
Y
+
+
+
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
2ch classH/2.00mm
2ch class-H
STK415-090-E 80W/JEITA
STK415-100-E 90W/JEITA
STK415-120-E 120W/JEITA
STK415-130-E 150W/JEITA
STK415-140-E 180W/JEITA
+
V
L
-
+
O
F
F
S
E
T
-
-
-
+
V
H
O
U
T
/
O
U
T
/
O
U
T
/
O
U
T
/
+
P
R
E
I
N
F
/
S
T
A
N
D
|
N
F
/
I
V
L
O
F
F
S
E
T
P
R
E
V
H
S
U
B
•
G
N
D
N
/
N
/
C
H
1
C
H
1
C
H
2
C
H
2
C
H
1
C
H
1
-
C
H
2
C
H
2
-
G
N
D
B
Y
+
+
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23
3ch classH/2.00mm
3ch class-H
STK416-090-E 80W/JEITA
STK416-100-E 90W/JEITA
STK416-120-E 120W/JEITA
STK416-130-E 150W/JEITA
+
V
L
-
+
O
F
F
S
E
T
-
-
-
+
V
H
O
U
T
/
O
U
T
/
O
U
T
/
O
U
T
/
+
P
R
E
I
N
F
/
S
T
A
N
D
|
N
F
/
I
I
N
F
/
O
U
T
/
O
U
T
/
V
L
O
F
F
S
E
T
P
R
E
V
H
S
U
B
•
G
N
D
N
/
N
/
N
/
C
H
1
C
H
1
C
H
2
C
H
2
C
H
3
C
H
3
C
H
1
C
H
1
-
C
H
2
C
H
2
-
C
H
3
C
H
3
-
G
N
D
B
Y
+
+
+
No. A1621-7/12
STK416-090-E
Evaluation Board Characteristics
THD - P
Pd - P
O
O
10
150
7
V = 38V
V = 38V
H
H
140
130
120
110
100
90
5
3
2
V = 27V
V = 27V
L
L
VG=40dB
Rg=600Ω
Tc=25°C
VG=40dB
f=1kHz
1.0
7
5
3
2
Rg=600Ω
Tc=25°C
R =8Ω
L
3ch Drive
R =8Ω
L
80
3ch Drive
0.1
7
5
3
2
70
60
50
40
0.01
7
5
30
20
3
2
10
0
0.1
0.001
1.0
2
3
5
7
2
3
5
7
2
3
5
7
2
3
5 7
2
3
5 7
10
2
3
5 7
100
2
3
5 7
1000
10
100
1000
1.0
Output power, P /ch - W
Output power, P /ch - W
ITF02727
ITF02728
P
- VO
L
P
- VO
H
O
O
150
140
130
120
110
100
90
150
140
130
120
110
100
90
V = 38V
H
V = 27V
L
VG=40dB
f=1kHz
VG=40dB
f=1kHz
R =8Ω
R =8Ω
L
L
3ch Drive
3ch Drive
Rg=600Ω
Rg=600Ω
80
80
70
70
60
60
50
50
40
40
30
30
20
20
10
0
10
10
0
20
20
30
40
30
40
50
60
Supply voltage, V
-
V
Supply voltage, V - V
H
ITF02729
ITF02730
L
P
- f
O
150
140
130
120
110
100
90
V = 38V
H
V = 27V
L
R =8Ω
L
3ch Drive
VG=40dB
Tc=25°C
THD=10%
THD=0.8%
80
70
60
50
40
30
20
10
0
10
2
3
5 7
2
3
5 7
2
3
5 7
2
3
5 7
100k
100
1k
10k
Frequency, f - Hz
ITF02731
No. A1621-8/12
STK416-090-E
[Thermal Design Example for STK416-090-E (R = 8Ω)]
L
The thermal resistance, θc-a, of the heat sink for total power dissipation, Pd, within the hybrid IC is determined as
follows.
Condition 1: The hybrid IC substrate temperature, Tc, must not exceed 125°C.
Pd × θc-a + Ta < 125°C ................................................................................................. (1)
Ta: Guaranteed ambient temperature for the end product
Condition 2: The junction temperature, Tj, of each power transistor must not exceed 150°C.
Pd × θc-a + Pd/N × θj-c + Ta < 150°C .......................................................................... (2)
N: Number of power transistors
θj-c: Thermal resistance per power transistor
However, the power dissipation, Pd, for the power transistors shall be allocated equally among the number of power
transistors.
The following inequalities result from solving equations (1) and (2) for θc-a.
θc-a < (125 − Ta)/Pd ...................................................................................................... (1)'
θc-a < (150 − Ta)/Pd − θj-c/N ........................................................................................ (2)'
Values that satisfy these two inequalities at the same time represent the required heat sink thermal resistance.
When the following specifications have been stipulated, the required heat sink thermal resistance can be determined
from formulas (1)' and (2)'.
• Supply voltage
• Load resistance
V , V
R
L
H L
• Guaranteed ambient temperature
Ta
[Example]
When the IC supply voltage, V = 38V, V = 27V and R is 8Ω, the total power dissipation, Pd, within the hybrid
H
L
L
IC, will be a maximum of 91W at 1kHz for a continuous sine wave signal according to the Pd-P characteristics.
O
For the music signals normally handled by audio amplifiers, a value of 1/8P max is generally used for Pd as an
O
estimate of the power dissipation based on the type of continuous signal. (Note that the factor used may differ
depending on the safety standard used.)
This is:
Pd ≈ 45.0W
(when 1/8P max. = 6.25W, P max. = 50W).
O O
The number of power transistors in audio amplifier block of these hybrid ICs, N, is 4, and the thermal resistance per
transistor, θj-c, is 2.1°C/W. Therefore, the required heat sink thermal resistance for a guaranteed ambient temperature,
Ta, of 50°C will be as follows.
From formula (1)'
θc-a < (125 − 50)/45.0
< 1.67
From formula (2)'
θc-a < (150 − 50)/45.0 − 2.1/6
< 1.87
Therefore, the value of 1.67°C/W, which satisfies both of these formulae, is the required thermal resistance of the heat
sink.
Note that this thermal design example assumes the use of a constant-voltage power supply, and is therefore not a
verified design for any particular user’s end product.
No. A1621-9/12
STK416-090-E
STK416-100-E Series Stand-by Control & Mute Control Application
4.7kΩ
STK416-100-E Series
#17pin
+OFF -OFF
OUT OUT OUT OUT
IN
NF
ST NF IN
IN
NF OUT OUT
+V
-V SET SET -Pre -V
+V Ch1+ Ch1- Ch2+ Ch2- +Pre SUB GND Ch1 Ch1
BY Ch2 Ch2 Ch3 Ch3 Ch3+ Ch3-
L
L
H
H
standard voltage VST
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
20 21 22 23
1
1kΩ
Stand-by Control (ex)
H: Operation Mode (+5V)
L: Stand-by Mode (0V)
33kΩ
2.7kΩ
47μF
/10V
2kΩ
Ch3-IN
Ch2-IN
10k
Ω
10k
Ω
470pF
GND
10kΩ
+V
H
Ch1-IN
+V
10kΩ
2.2kΩ
L
Mute Control
H: Single Mute
L: Normal
Ch3-OUT
GND
Ch2-OUT
GND
-V
L
+5V
Stand-by
Control
-V
H
+5V
Ch1-OUT
Mute Control
ST-BY
MUTE
MUTE
PLAY
ST-BY
STK416-100-E Series Application explanation
Operate mode (VST
) ≥2.5V
OFF
Stand-By mode (VST ) <0.6V (0V typ)
ON
Stand-by Circuit
in Pre Driver IC
SW transistor
4.7kΩ (*3)
STK416-100-E Series
ΔV
Point.B
BE
Ch1
Ch1
Ch2
Ch2
Ch1
GND IN
Ch1 ST
NF BY
Ch2
NF
Ch2
IN
Ch3
OUT(+) OUT(-)
Ch3
-V
+V
H
-Pre
OUT(+) OUT(-) OUT(+) OUT(-) +Pre
SUB
H
1
12
13
14
15
4
5
6
7
9
10
11
16
17 18 19
22
23
8
6.8k
Ω
56kΩ
6.8k
6.8k
Ω
56k
Ω
Ω
56k
Ω
I1
Tr2
Tr1
Tr2
(2) Load short
detection part
22kΩ
56kΩ
I3
Tr4
(*4) R2
0.1μF
I2
Point.C
1kΩ
10kΩ
OUT Ch3
Tr3
(3) Latch-up
circuit part
100k
Ω
1) Stand-by control circuit part
H: Operation mode (+5V)
L: Stand-by mode (0V)
-V
CC
82kΩ
82kΩ
1kΩ
33kΩ
2kΩ
Tr5
Tr6
(*1) R1
(*2)
OUT Ch1
OUT Ch2
Tr5
22μF
82kΩ 22μF
ex) 2.7kΩ
ex) +5V
100
kΩ
33μF
(4) DC vffset
protection
No. A1621-10/12
STK416-090-E
A protection application circuit of STK416-100sr consists of each block of (1)-(4).
(1)Stand-by control circuit part
(2)Load short detection part
(3)Latch-up circuit part
(4)DC voltage protection part
1) Stand-by control circuit part
About #17 pin reference voltage VST.
<1> Operation mode
The SW transistor of pre-driver IC is turned on at VST ≥ 2.5V, and the amplifier becomes operation mode.
ex) at VST (min) = 2.5V
VST = (*2) × IST + 0.6V → 2.5V=4.7kΩ × IST + 0.6V, I1 ≈ 0.40mA
<2> Stand-by mode
The SW transistor of pre-driver IC is turned off at VST ≤ 0.6V (typ 0V), and the amplifier becomes stand-by
mode.
ex) at VST = 0.6V
VST = (*2) × IST+0.6V → 0.6V = 4.7kΩ × IST + 0.6V, I1 ≈ 0mA
(*1) Resistance for restriction
Please set R1 for the voltage (VST) of the stand-by terminal to become ratings (+2.5V to 5.5V (typ 3.0V)).
(*2) Please supply the stand-by control voltage by the microcomputer etc.
(*3) The limitation resistance is built into hybrid IC internal (#17pin) and 4.7kΩ is built into.
2) Load short detection part
Please refer to the attached paper (RL short protect explanation) for the operation explanation.
TR1 (or TR2) doesn't move by normal operation. Because, Point.B - Point.C < 0.6V.
Therefore load short detection part doesn't operate.
But, when a load short-circuited, TR1 (or TR2) operate (Point.B - Point.C > 0.6V), and an electric current ‘I2’ flows.
3) Latch-up circuit part
When I2 was supplied to latch-up circuit, TR3 operate.
VST becomes stand-by mode (0V) when TR3 operates (I3 flows), the power amplifier is protected.
Stand-by mode is maintained when once TR3 operates because TR3 and TR4 compose the thyristor.
It is necessary to make the Stand-by control voltage (*2) L (0V) once to release stand-by mode and to make the
power amplifier operate again.
After, when stand-by control (*2) is returned to H (ex, +5V), it operates again.
(*4) I3 is changed depending on the power-supply voltage (-V ).
CC
Please set resistance (R2) to become I1 < I3 by the following calculation types.
I1 ≤ I3=V /R2
CC
4) DC offset protection part
DC offset protection works at applying VDC (+), VDC (-) ≈ 0.5V (typ) to ‘OUT CH1’ or ‘OUT Ch2’, then HIC will
shutdown (stand-by mode).
It is necessary to make the stand-by control voltage (*2) L (0V) once to release stand-by mode.
The power amplifier operates again after stand-by control (*2) return to H (ex, +5V).
Please set the protection level by the resistance of ‘82kΩ’.
Moreover, please set the time constant by ‘22μ//22μ’ so as not to mis-detect it when the audio signal is output.
No. A1621-11/12
STK416-090-E
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of February 2010. Specifications and information herein are subject
to change without notice.
PS
No. A1621-12/12
相关型号:
©2020 ICPDF网 联系我们和版权申明