STK4362 [SANYO]

AF Power Amplifier (10W + 10W min, THD = 1.0%); AF功率放大器( 10W + 10W分钟, THD = 1.0 % )
STK4362
型号: STK4362
厂家: SANYO SEMICON DEVICE    SANYO SEMICON DEVICE
描述:

AF Power Amplifier (10W + 10W min, THD = 1.0%)
AF功率放大器( 10W + 10W分钟, THD = 1.0 % )

商用集成电路 放大器 功率放大器 局域网
文件: 总6页 (文件大小:441K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Ordering number: EN 1229C  
Thick Film Hybrid IC  
STK4362  
AF Power Amplifier  
(10W + 10W min,THD = 1.0%)  
Features  
Package Dimensions  
• Capable of guaranteeing substrate temperature 125°C, unit: mm  
thereby reducing heat sink.  
4033  
• Excellent cost performance.  
[STK4362]  
Specifications  
Maximum Ratings at Ta = 25°C  
Parameter  
Maximum supply voltage  
Thermal resistance  
Symbol  
Conditions  
Ratings  
Unit  
V
max  
Pin 4 to 7, 12  
One power transistor  
50  
V
CC  
θ
j-c  
5
150  
°C/W  
Junction temperature  
Tj  
°
°
°
C
C
C
Operating substrate temperature  
Storage temperature  
T
125  
C
Tstg  
30 to +125  
Available time for load short-circuit  
t
V
= 33V, R = 8  
, P = 10W, f = 50Hz  
2
s
s
CC  
L
O
Recommended Operating Conditions at Ta = 25°C  
Parameter  
Recommended supply voltage  
Load resistance  
Symbol  
Conditions  
Ratings  
Unit  
V
V
33  
8
CC  
R
L
SANYO Electric Co., Ltd. Semiconductor Business Headquarters  
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN  
61297HA (ID) / 8058MO / 2043KI, TS No. 1229—1/6  
STK4362  
Operating Characteristics at Ta = 25°C, V = 33V, R = 8, Rg = 600, VG = 40dB, at specified Test Circuit  
CC  
L
(based on Sample Application Circuit).  
Parameter  
Quiescent current  
Symbol  
Conditions  
= 38V  
CC  
min  
20  
typ  
60  
max  
Unit  
mA  
W
I
V
120  
CCO  
P
(1)  
(2)  
THD = 1.0%, f = 1kHz  
10  
O
O
Output power  
THD = 1.0%,  
f = 30Hz to 20kHz  
P
5
W
Total harmonic distortion  
Frequency response  
THD  
f , f  
Po = 0.1W, f = 1kHz  
+0  
0.3  
0.8  
%
Po = 0.1W,  
dB  
20 to 100k  
120k  
Hz  
L
H
3  
Input impedance  
r
Po = 0.1W, f = 1kHz  
= 38V, Rg = 10k  
i
Output noise voltage  
V
V
mVrms  
NO  
CC  
Notes.  
Unless otherwise specified for the power supply at the time of test, use the  
constant voltage power supply.  
When testing the available time for load short-circuit and output noise volt-  
age, use the specified transformer as shown right.  
The output noise voltage is the peak value on the mean value indicating  
rms reading (VTVM), and should not involve impulse noise.  
Specified Transformer Power Supply  
(Equivalent to RP-22)  
Equivalent Circuit  
No. 1229—2/6  
STK4362  
Sample Application Circuit: 10W min 2-channel AF power amplifier  
Input voltage, Vi - mV  
Output power, P - W  
O
Frequency, f - Hz  
Frequency, f - Hz  
No. 1229—3/6  
STK4362  
Frequency, f - Hz  
Frequency, f - Hz  
Supply voltage, V - V  
Supply voltage, V - V  
CC  
CC  
Signal source resistance, Rg - Ω  
Power supply ripple voltage, Vrp - mVrms  
No. 1229—4/6  
STK4362  
Operating substrate temperature, Tc - °C  
Supply voltage, V - V  
CC  
Output power, P - W  
O
Frequency, f - Hz  
0.5s / div  
2
Area of heat sink, S - cm  
No. 1229—5/6  
STK4362  
0.5s / div  
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear  
power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury,  
death or property loss.  
Anyone purchasing any products described or contained herein for an above-mentioned use shall:  
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their  
officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated  
with such use:  
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO.,  
LTD., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly or severally.  
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO  
believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of  
intellectual property rights or other rights of third parties.  
This catalog provides information as of June, 1997. Specifications and information herein are subject to change without notice.  
No. 1229—6/6  

相关型号:

STK4362V

2-CHANNEL 6W MIN TO 50W MIN AF POWER AMP (DUAL-SUPPLY)
SANYO

STK437

THICK FILM HYBRID IC
ETC

STK437-XXX

THICK FILM HYBRID IC
ETC

STK4372

Features of the IMST Hybird ICs
ETC

STK4372V

2-CHANNEL 6W MIN TO 50W MIN AF POWER AMP (DUAL-SUPPLY)
SANYO

STK439

THICK FILM HYBRID IC
ETC

STK439-XXX

THICK FILM HYBRID IC
ETC

STK4392

AF Power Amplifier
SANYO

STK4392V

2-CHANNEL 6W MIN TO 50W MIN AF POWER AMP (DUAL-SUPPLY)
SANYO

STK441

20W MIN 2 CHANNEL AF POWER AMPLIFIER
SANYO

STK441-XXX

THICK FILM HYBRID IC
ETC